This simply makes the panel a bit nicer given how things are layed out--
the items with larger visual weight are grouped at the top.
Differential Revision: https://developer.blender.org/D9366
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
Global automasking options are usually turned on/off for quick
adjustments both in brushes and filters, so it is convenient to have them
in a pie menu.
This uses the Alt + A shortcut.
Reviewed By: dbystedt, HooglyBoogly
Differential Revision: https://developer.blender.org/D9282
This adds an option to orientate the trimming shape using the surface
normal instead of the view when lasso trim is used.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9231
Basic support for velocity updates with the APIC method.
This commit adds APIC to the already existing dropdown menu for the simulation method. The APIC plugin within Mantaflow has been updated to the latest version.
Relabel the Playback Synchronisation menu so that it's clear:
- what does happen (instead of describing what does //not// happen), and
- that the synchronisation options don't just affect audio.
The changes are:
- Change label from "Audio" to "Sync"
- Change the labels of the sync enum:
- No Sync → Play Every Frame
- Frame Dropping stays the same
- AV-sync → Sync to Audio
The "Audio" label has moved one option down, as that option does
actually relate to audio.
Reviewed By: looch, Severin, HooglyBoogly, campbellbarton
Differential Revision: https://developer.blender.org/D9269
Add "Selection to" as prefix for those menu items that move the selected
keyframes to something, for both the Key → Snap menu and the Shift+S pie
menu.
No functional changes.
This was missed in rB477d983c2e8ab298cbf638d5aadd77fad9c2f677
Differential Revision: https://developer.blender.org/D9304
Various changes to some labels and descriptions to be more accurate, clear, or less confusing.
Differential Revision: https://developer.blender.org/D8394
Reviewed by Hans Goudey
We already had the ability to bake fcurves but no way to convert the
baked result back without using python. This patch adds and operator
that is available now next to the bake operator in the drop down menu,
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6379
Previously, only predefined and limited set of intrinsics combinations
could have been refined. This was caused by a bundle adjustment library
used in the early days of the solver.
Now it is possible to fully customize which intrinsics are to be refined
during camera solving. Internally solver supports per-parameter settings
but in the interface they are grouped as following:
* Focal length
* Optical center
* Radial distortion coefficients (which includes k1, k2, k3, k4)
* Tangential distortion coefficients (which includes p1, p2)
Differential Revision: https://developer.blender.org/D9294
Historically the refine options had a hardcoded list of possibilities.
This was caused by an old bundle adjustment code which did not support
all possible combinations.
Now the bundle adjuster is based on Ceres solver, allowing to refine
anything in any combination.
Moves the Text Editor 'Resolve Conflict' button closer to data-block selector and with 'Question' icon.
Differential Revision: https://developer.blender.org/D9266
Reviewed by Hans Goudey
Set property split in the higher level panel functions so that it carries
over to buttons added after. Also discard the redundant "Symmetry"
to make sure there is enough space for the checkbox label.
The now redundant "X" checkbox is removed since it's also present in the
Symmetry panel above. The Topology Mirror is moved into the Symmetry
panel also.
This was needed because `Mesh.use_x_mirror` has recently been turned into
different functionality, and its old functionality now lives under
`Mesh.use_mirror_vertex_group_x`. Something went wrong in the UI in This
transition.
Differential Revision: https://developer.blender.org/D9287
This adds a tool property for sculpt line gesture tools (line and
project) to limits its effect to the segment of the gesture instead of
using the infinite line to bisect the mesh in two parts.
To achieve that, the line gesture now has two extra side planes that can
be enabled/disabled for getting the nodes from the PBVH and to test the
vertices.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9307
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
The operator was using a secondary python operator to ask parameters before running, but this can be done in invoke.
Differential Revision: https://developer.blender.org/D9330
This adds a property to the grab that masks vertices based on its
original normal and grab delta. When used on thin meshes, it allows to
grab the silhouette from one side of the object without affecting the
shape of the other side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9205
The new parameter allows to define if after cutting the stroke the cap of the cut side will be set as flat.
Before, the cap shape of the cut side always was equal to the original stroke, and in some situations, the rounded cap was visible.
Note: If the angle of the join is very extreme, it's still possible to view some sections of the cut stroke.,
All tools planned for 2.91 now have icons, so this option can be
removed.
Reviewed By: dfelinto, Severin
Differential Revision: https://developer.blender.org/D9299
nothing
Caused by rB6faa765af895.
Since above commit, we have to use paint.mask_box_gesture instead now.
Maniphest Tasks: T81926
Differential Revision: https://developer.blender.org/D9300
For some reason the layout code doesn't center the search button properly. Add
a blank icon button to add some padding, dynamically resized as the region size
changes. This is quite finicky and not at all perfect. But it makes the search
button look far less off-place.
The pin button should be next to the data-path, which is what it belongs to.
Note that this makes the placement of the search button in the header look
quite off. That is because it's centered to the absolute header width, not the
width of the main region (which is smaller because of the tab region on the
left).
Technically it's correct that way, visually it looks wrong. This will be
addressed in a followup commit.
Those two features are not directly related and one might be activated
in master earlier than the other.
WITH_PARTICLE_NODES was removed, because we continue the project
under the name "Geometry Nodes".
Being able to adjust the distance between fluid and obstacles comes in handy when trying to achieve a fluid motion over inclined obstacles.
Depending on the slope of such obstacles, already small adjustments of this value can help when particles stick to obstacle surfaces (i.e. make particles not stick to obstacles).
Shorten name of 'Inverse Cursor Color' to 'Inverse Color' so that it does not overflow its popover.
Differential Revision: https://developer.blender.org/D9274
Reviewed by Brecht Van Lommel
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
The design for how we approach the "Everything Nodes" project
has changed. We will focus on a different part of the project initially.
While future me will likely refer back to some of the code I remove here,
there is no point in keeping this code around in master currently.
It would just confuse other developers working on the project.
This does not remove the simulation modifier and data block. Those are
just cleaned up, so that the boilerplate code can be reused in the future.
Slight adjustments to widths, and adds gaps below titles, of 'Viewport Gizmos' and 'Object Types Visibility' popovers.
Differential Revision: https://developer.blender.org/D9257
Reviewed by Pablo Vazquez
Add "Selection to" as prefix for those menu items that move the selected
keyframes to something, for both the Key → Snap menu and the Shift+S pie
menu.
No functional changes.
