This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
This addition to the filters allows the user to enable the
outliner tree to restrict the listing to only Selectable objects.
Differential Revision: https://developer.blender.org/D7310
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
There should not be much user visible here (other than T73668 being addressed).
I added the writing code already for the initial implementation of workspaces,
but we decided to keep it disabled until the top-bar design is more clear. It
was never planned to keep this disabled for so long.
Fixes T73668.
This one was a bit more tricky, because the file loading is
mixed with versioning code and because collections are
embedded into scenes.
All tests that passed before, still pass.
Previously, only predefined and limited set of intrinsics combinations
could have been refined. This was caused by a bundle adjustment library
used in the early days of the solver.
Now it is possible to fully customize which intrinsics are to be refined
during camera solving. Internally solver supports per-parameter settings
but in the interface they are grouped as following:
* Focal length
* Optical center
* Radial distortion coefficients (which includes k1, k2, k3, k4)
* Tangential distortion coefficients (which includes p1, p2)
Differential Revision: https://developer.blender.org/D9294
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
The versioning code to default to old booleans for old files was
faulty because really old files had a 'solver' field (later removed,
but then added back for new booleans).
The versioning code to default to old booleans for old files was
faulty because really old files had a 'solver' field (later removed,
but then added back for new booleans).
It was rather a huge chunk of code, which started to become
more harder to maintain with the transition to OpenSubdiv based
implementation. Because of this transition, the compatibility was
also rather on a poor side.
Remove compatibility support for pre-2.50.9 multires.
Ref T77107
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D9238
Being able to adjust the distance between fluid and obstacles comes in handy when trying to achieve a fluid motion over inclined obstacles.
Depending on the slope of such obstacles, already small adjustments of this value can help when particles stick to obstacle surfaces (i.e. make particles not stick to obstacles).
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Although the `ELEM` macro wraps logic into parentheses, it's not intended to be
used that way. Unexpanded macros should still follow regular coding style for
readability and for tools parsing the code (it confused clang-format for
example).
Setting this type is required to prevent fluid particles from being treated like physics particles. The actual fix for this was made in rB11a8a6d0e6b5.
The new parameter made so that previously keyed Alpha values were lost
and instead the new "Emission Strength" was keyed.
Issue introduced with the original commit of Emission Strength: b248ec9776
Note: Files created since the issue (September 17) that keyframed the
Emission Strength will have to fix their files manually.
Differential Revision: https://developer.blender.org/D9221
This patch "modernizes" `DNA_struct_switch_endian` similar to
how I updated `DNA_struct_reconstruct` recently. Furthermore,
some special case handling have been moved to another place.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9089
The overlay options in the image/uv editor is hidden in side panels and menus. Sometimes this panel is even hidden, while still useful.
The goal of this task is to introduce an overlay pop-over just like the overlay-popover of the 3d viewport.
Popover has
* UV Stretching (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Display As (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show Modified (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show UV Edges (including opacity slider; available UV, View, Paint, when active object mode is a mesh and in OB_EDIT mode)
* Udim tiles when no image is available.
Like the 3d viewport, there will be a editor toggle to enable/disable the overlays
For compatibility reasons the RNA properties are added to both the `SpaceImage.uv_editor` amd `SpaceImage.overlay`. On DNA level they are still stored in the SpaceImage. only new properties are added to the SpaceImageOverlay struct. During the next major release we could remove these options from `SpaceImage.uv_editor`. This should be noted in the Python section of release notes.
Reviewed By: Julian Eisel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D8890
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
Initialize CLOG in the blendfile-loading unit test superclass. Since
rB8683d4e88f2e CLOG is used by more areas in Blender, and without
initialisation it crashes.
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
BLO_version_defaults_userpref_blend -> blo_do_versions_userdef
The name was misleading as it was declared along with
BLO_update_defaults_startup_blend making it seem these functions were
related.
In fact preference defaults don't need to be updated as is done for
startup.blend since an in-memory blend file isn't used.
Rename the function to match other versioning functions
called from readfile.c. Also add/update comments on these differences.
Now versioning UserDef is run in readfile.c,
as is done for other Blender data.
Previously versioning was mixed with other run-time initialization,
so it needed to be called later by the window manager.
readfile.c's versioning function was only used for 2 variables.
Move versioning into versioning_userdef.c so everything
is done in one function.
Note: DNA_struct_elem_find checks have been replaced with checks for
the next released version.
This is harmless, as only old preferences saved between releases can
have their values overwritten.
Note: userdef versioning should be called from `do_versions_userdef`,
this will be done separately.
There was an oversight when adding new experimental user preferences.
I can try to overengineer this later to make it more fail-proof. But for now
it should be clear what to update when adding a new variable.
