* Brush editor tab now defaults to old
interface, with two options:
- Advanced, which shows more options
- Edit Mode, which shows workspace visibility buttons
* Hard edge mode (which forcibly sets face set slide to 0
and enables preserve faceset boundarys) now works again.
* Smooth_strength_factor is now a brush channel with
inheritance set to true.
* Alt-smooth now restores the hard edge mode and
smooth_strength_factor from the active brush context.
While both are default inherited from toolsetting defaults,
it can be quite confusing if either have inheritance unset
by the user in the Smooth brush.
* Fixed a particularly nasty memory leak
where the entire process of entering sculpt
mode was being done twice.
* Discovered that range tree is extremely slow.
Got the alternative freelist version up and running,
and replace a usage of GSet with a bitmap. However
the new code is disabled pending further testing.
Literally an order of magnutude improvement.
* Cleaned up the SculptCustomLayer API that is
used for custom data.
* Various SculptCustomLayer references are now maintained
in ss->custom_layers and are updated automatically when
the CD layout changes.
* PBVH_GRIDS now forcibly allocate custom layers in simple_array
mode (i.e. they don't allocated real customdata layers at all).
* SculptCustomLayers can optionally be preserved in the final mesh.
* Fixed handling of CD_TEMPORARY which was broken.
* The layer brush can now split the pbvh during use.
* Persistent base data is now saved as permanent CD layers (except
for PBVH_GRIDS). This is necessary for undo, if we want we can
add special code to remove them on exising sculpt mode.
* The layer brush now uses the SculptCustomLayer API instead of
having seperate bmesh and faces/grids implementations.
* In unrelated changes, fixed curve presets for clay brushes.
- Still need to implement stabilized input mappings, which the
clay thumb brush needs.
* BrushChannelSet is now a pure collection. This
eliminated the annoying brush.channels.channels
paths, and also makes library overriding work.
* Now sure I've done this correctly. Struct extended
collection properties are a bit confusing.
* Move more dyntopo settings to brush channels
* Implemented the unprojected radius hack in
the new brush system. I'm not really happy
with it, but doing it properly is going to
take some thought.
* Added a new curve brush channel type
* Added a BKE_brush_curve_strength_ex method
that just takes preset and curve as arguments,
instead of pulling them from Brush.
* Autosmooth and topology rake now have their
own falloff curves.
* Moved brush settings (in sculpt mode) to
(for now) a new properties editor tab.
* Brush settings can now be individually configured
to show up in the workspace buttons.
* Brush settings can also be reordered.
* The new brush tab has a "preview" subpanel
to preview the workspace settings layout.
This is where settings are reordered.
* Sculpt now has an API to get brush channel settings.
If a sculpt cache exists it will use the channels there
(ss->cache->channels_final), otherwise it pulls them
from a brush and Sculpt toolsettings. Exampes:
float f = SCULPT_get_float(ss, "setting", sd, brush);
itn i = SCULPT_get_int(ss, "setting", sd, brush);
* Improved the UI a bit
* The input device curves for brush channels
now use a copy on write mechanism.
+ It's based on a global cache of curves.
The alternative is to reference count
BrushChannels, which I also implemented
then abandoned.
+ Profiling showed that copying CurveMapping
instances was actually a problem.
* Lots of small fixes to the old<-> new brush setting
conversion code;
* Brush commands can now, sortof, have individual
spacing. The default brush spacing still acts
as a minimum though.
* Added a BLI_ghash_lookup_p_ex method that
returns the key ptr inside the ghash (it
returns the actual key, not a pointer to
Entry.key).
* Added a general 1d CurveMapping preset operator
that uses an RNA path to get the curve.
BrushChannels are now stored in linked lists
instead of simple arrays. This helps to
avoid memory corruption.
I had originally wanted to be able to pass
BrushChannels by value, but that doesn't really
work since they heap allocd data (the input
mapping curves).
Change KeyMapItem.alt/ctrl/shift/oskey to integer types,
where -1 is used to ignore the modifier when matching key-map items.
It was only possible to set all modifiers to -1 at once from RNA
using the 'any' property.
Afterwards individual modifiers could be set back to true/false.
Although these key-map items could not be exported/imported.
Exposing the values directly avoids the need for cumbersome workarounds.
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
since their names were inconsistent.
This is mainly for discoverability.
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).
Split screenshot area into an operator that depends on cursor.
Adds an "Auto" option to blend thumbnail types that will automatically
use Screenshot if there is no camera and 3dview, or workbench render
with shading settings from the largest 3dview.
See D12407 for more details.
Differential Revision: https://developer.blender.org/D12407
Reviewed by Campbell Barton
"App" is a name reserved for the application templates at the moment.
It may become its own term in the near future if Templates are separated
from "Apps".
So since this is a name not exposed to the users we should renamed it
sooner than later.
Note that this will require scripts to update since the name of the
class is renamed here.
This also requires an update in the User Manual.
Differential Revision: https://developer.blender.org/D12523
This breaks API compatibility. However we are now grouping this setting
in the proper section (preferences.apps), so scripts had to update anyways.
So they may as well do it for the final name.
The reason to remove from the UI is that this is intended for app setup,
and as such it should not be exposed to final users until we have apps
better presented (for 3.1 hopefully).
Differential Revision: D12516
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.
The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.
It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.
Differential Revision: https://developer.blender.org/D12456
In {rB9cff9f9f5df0} asset_library was renamed → asset_library_ref.
Missed to update this in assets.py.
Differential Revision: https://developer.blender.org/D12497
Seperate enabling PBVH_BMESH from enabling DynTopo:
* Created a new option to globally disabled
DynTopo.
* The DynTopo panel header now reads "Dynamic Mode",
to hopefully signal that turning on PBVH_BMESH is
a seperate step from enabling or disabling DynTopo
itself.
* The first checkbox in the panel is "DynTopo" so it
should be clear enough (it's on by default, with multiple
layers of file versioning checks).
PBVH_BMesh's undo system:
* CD_MESH_ID layers are now permanently saved once
they are created (by default they are not). This
fixed a *lot* of bugs:
Before this the undo system had to save maps between
mesh indices and mesh IDs on transitioning
between sculpt and global undo steps. This was
extremely error prone, and it simply wasn't possible
to cover all of the corner cases
* Note that there is still an odd bug where the first
global undo push after a sculpt step gets ignored,
I dunno what's up with this.
* Dyntopo undo should be nearly (hopefully completely)
bug-free after this commit.
C++20
* Made a few small changes to get blender to compile
with c++20. std::result_of was removed, had to
replace a couple of usages of it with std::invoke_result.
* I'm planning to do some design studies on rewriting
sculpt into C++.
* I strongly suspect we are going to need C++20'a new
concepts feature if we move sculpt into C++.
I'm planning to do some design studies on how
that might work.
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
It appears an old version of this file was committed by accident. The
intended change to remove sculpt layers was done in versioning code and
does not require a modified startup.blend.
