* BrushChannelSet is now a pure collection. This
eliminated the annoying brush.channels.channels
paths, and also makes library overriding work.
* Now sure I've done this correctly. Struct extended
collection properties are a bit confusing.
In e6a1d488ab `deselect_all` property was removed from
`sequencer.select` operator but some keymap items were missed, which was
caught by tests by buildbot.
Operator combines more features and it wasn't very transparent which
properties are used in which feature and how they are used.
Features linked_time, side_of_frame and linked_handle are
isolated, logic moved into own function.
deselect_all property was removed as it practically equals to
!extend in all cases.
Functional change: Dragging existing selection will not change active
strip. Previously this could happen if click happened on strip that
wasn't active.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12320
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
Add a context menu dedicated to asset operations to the Asset Browser.
There are two separate context menus to keep things separated well and
avoid confusing if-else logic (similar to D12057 & D12059). Their polls
make sure they are displayed for the right contexts only.
Also (to be committed as followup cleanup): Remove now unused special
handling for assets in file delete operator.
Differential Revision: https://developer.blender.org/D12062
Adds an operator invoked by default with Ctrl+F that while hovering a UI
list, opens the search field of the list and enables text input for it.
With this commit the search button may actually be out of view after
Ctrl+F still. The following commit adds auto-scroll to solve that.
A downside is that in the Properties, there also is Ctrl+F to start
the editor-wide search. That's not unusual in Blender though (e.g.
scolling with the mouse over a UI list also scrolls the list, not the
region).
Fly navigation has always had this option. They is particularly useful
when users use "Trackball" as their orbit method.
For walk navigation this works as a one off option. Not as a toggle like
for fly navigation.
Differential Revision: https://developer.blender.org/D11863
Partially revert 7fc220517f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
Caused by improper testing on my part, assuming a helper function
existed in the industry compatible keymap file, and also assuming it
also used the N and T keys for the left and right side-regions.
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
Remap {key Alt I} from `anim.delete_key_v3d` to `anim.delete_key`. This
makes it keyframe removal symmetrical with keyframe insertion ({key I}).
Both the default keymap {key Alt I} and the Industry Compatible keymap
{key Alt S} have been updated.
Reviewed By: sybren, #animation_rigging
Maniphest Tasks: T88068
Differential Revision: https://developer.blender.org/D11528
The (tracking) camera presets have not been updated in the last 7 or
more years, so they are very outdated. I found it pointless to have a
few specific camera models in the list and instead add the most commonly
used sensor sizes/film sizes. This way the list is shorter, easier to
maintain/becomes later outdated, and is more user friendly for most people
who don't own any of the specific cameras. I added the Crop Factor to the
Beginning of the name, so it gets sortet in the correct order and presets
are easier to find based on the size.
Reviewed By: #render_cycles, #motion_tracking, brecht, sergey
Differential Revision: https://developer.blender.org/D10739
This operator is needed in some cases to update image preview.
In workspaces with smaller timelines this is limiting, because users
need to first check that mouse cursor is in correct place, then press
CTRL+R shortcut.
Use the D-key to access the view menu instead of the Tilda key,
which isn't accessible on some international layouts.
To resolve the conflicts the following changes have been made.
- `D` (motion) opens the view menu.
- `D` (mouse-button) uses grease-pencil (as it does currently).
- `Tilda` is used to for "Object Mode Transfer" instead of the View menu.
See T88092 for details.
Reviewed By: Severin
Ref D11189
The `file.execute` operator would early-exit because the mouse wasn't hovering
the file list. Caused by 4ba9d7d71e.
Although simpler solutions would have been possible, I decided it's better to
split add a new operator for executing based on the mouse (for double-clicking
files), to separate that from the window level execute operator
(`file.execute`). This allows more control and we can get rid of the implicit
assumption that the keymap would call `file.select` on mouse-press, and
`file.execute` on double-click, for the double-click behavior to work. The cost
is that we execute the file selection & activation logic twice on the
double-click, but that shouldn't be an issue at all.
Also removes the `need_active` property from the `file.execute` operator.
That's ancient and wasn't implemented well anyway.
To be clear, reason this fixes the bug is that `file.execute` works entirely
with the `execute()` callback now and doesn't early-exit based on the mouse
position anymore.
Might trigger warnings about the `need_active` property not being found for
custom keymaps. These can be ignored and the property can safely be removed
from the keymap. I don't expect other keymap breakages.
