Blender did not support to input East Asian characters (Chinese, Japanese,
Korean) on macOS. This patch adds support for Japanese input, by implementing
the appropriate processing for the NSTextInputClient protocol.
Technical notes:
* The conversion candidate window is drawn by the input method program calling
`firstRectForCharacterRange`.
* The string before confirmation (called `composite` in blender) is handled in
the `setMarkedText` method called by the input method program.
* The string after confirmation (called `result` in the blender) is processed
in the `insertText` method called by the input method program.
Ref T51283
Differential Revision: https://developer.blender.org/D11695
IME conversion candidate window was displayed at the mouse position, instead of
below the cursor or text selection.
Blender need to tell the input method program where the conversion candidate
window is during Japanese and Chinese input.
In macOS, the `firstRectforCharacterRange` is called when input by the input
method starts, and the position of the conversion candidate window is
specified. Therefore, it is necessary to set the position of the conversion
candidate window before input starts. This patch changes it so that the position
of the conversion candidate window is always set when the cursor is drawn.
Differential Revision: https://developer.blender.org/D11697
When inserting text using IME on a button, the character after the cursor is
displayed before the cursor.
This bug seems to have occurred during the refactoring in D765.
Differential Revision: https://developer.blender.org/D11072
This changes `UI_but_func_tooltip_set` so that it allows passing a custom free function, which has two benefits:
* The caller can pass `null` to indicate that the value should not be freed.
* Arbitrary c++ data can be passed to the callback (before the struct had to be trivially destructible).
I added `uiFreeArgFunc` and used it in other places where appropriate.
Differential Revision: https://developer.blender.org/D11738
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
Fix by reverting the part of ec30cf0b74
that assigned `but->editval` in `ui_numedit_begin_set_values`.
Causing access freed memory when using tab to switch
to a numeric input and then leaving the textbox by clicking outside.
This was because `ui_numedit_begin_set_values` shouldn't need to set
`but->editval` and overwrite the pointer.
This would set a pointer that had previously been freed,
causing a `NULL` check to fail later on.
Ref D11679
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
Removal of unused local variable. Calculation of underline thickness
no longer needed with change to text output of underscore character.
Introduced in aee04d4960
Differential Revision: https://developer.blender.org/D11641
When drawing mnemonic underlines for hotkeys, use text output of
underscore character instead of direct drawing a line. Otherwise these
are not visible in dialog buttons.
Introduced in 0fcc063fd9
Differential Revision: https://developer.blender.org/D11641
Reviewed by Campbell Barton
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
Widget drawing code already supported drawing right-aligned, grayed out
shortcut strings. This patch generalizes things a bit so this can also
be used to draw other hints in the same way. There have been a few
instances in the past where this would've been useful, D11046 being the
latest one.
Note that besides some manual regression testing, I didn't check if this
works yet, as there is no code actually using it (other than the
shortcuts). Can be checked as part of further development for D11046.
A possible further improvement would be providing a way to define how
clipping should be done. E.g. sometimes the right-aligned text should be
clipped first (because it's just a hint), in other cases it should be
left untouched (like current code explicitly does it for shortcuts).
Removes the `UI_BUT_HAS_SHORTCUT` flag, which isn't needed anymore.
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
This patch improves the positioning of the little mnemonic underlines
shown under some hotkey letters in menus, especially when using custom
fonts.
see D11521 for details and examples.
Differential Revision: https://developer.blender.org/D11521
Reviewed by Campbell Barton
max unneccessarily
Since rB298d5eb66916 [which was needed to update buttons with custom
property range functions correctly], using tab would always clamp
(hardmin/hardmax) properties which were using FLT_MAX / INT_MAX as range
in their property definitions.
The clamping of rB298d5eb66916 was copied over from rB9b7f44ceb56c
[where it was used for the softmin/softmax], and while the re-evaluation
of hardmin/hardmax is needed for custom property range functions, the
clamping should actually not take place.
There are many properties using FLT_MAX / INT_MAX etc. and while it
probably would be good to update these with ranges that make more sense
-- not using FLT_MAX / INT_MAX would not have done the clamping here --
there should not be an arbitrary limit to these and they should stay as
they are.
Maniphest Tasks: T88762
Differential Revision: https://developer.blender.org/D11473
Cause is that initializing the cryptomatte session would reset the
current frame of an image sequence. The solution is to always use the
scene current frame so it resets to the correct frame.
This was a todo that wasn't solved after it landed in master.
Needs to be backported to 2.93.
An arbitrary size offsets was used in float_array_to_string,
simplify the loop, use exact size limits.
Also rename variables so it's clear which array the length apply to.
Event though in practice this wasn't causing problems as the fixed size
buffers are generally large enough not to truncate text.
Using the result from `snprint` or `BLI_snprintf` to step over a fixed
size buffer allows for buffer overruns as the returned value is the size
needed to copy the entire string, not the number of bytes copied.
Building strings using this convention with multiple calls:
ofs += BLI_snprintf(str + ofs, str_len_max - ofs);
.. caused the size argument to become negative,
wrapping it to a large value when cast to the unsigned argument.
Fix T88167.
Caused by {rB97defd9cd79b6e3ed0e52481a7078107dbe0522b}
`(BLI_rcti_isect_pt` used here to confirm if cursor position is in between active region boundary.
Subtracting min region boundary from the mouse position before the check, fails the condition.
`mval[2]` introduced to hold the region relative mouse position.
Reviewed By: Severin
Maniphest Tasks: T88167
Differential Revision: https://developer.blender.org/D11224
This patch introduces non linear sliders. That means, that the movement
of the mouse doesn't map linearly to the value of the slider.
The following changes have been made.
- Free logarithmic sliders with maximum range of (`0 <= x < inf`)
- Logarithmic sliders with correct value indication bar.
- Free cubic sliders with maximum range of (`-inf < x < inf`)
- Cubic sliders with correct value indication bar.
Cubic mapping has been added as well, because it's used for brush sizes
in other applications (Krita for e.g.).
To make a slider have a different scale type use following line in RNA:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_LOGARITHMIC);`
or:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_CUBIC);`
Test the precision, step size and soft-min if you change the scale type
of a property as it will feel very different and may need tweaking.
Ref D9074
When the user hovered over a number input field, pressed Enter and then
typed in '0', confirming the input would always cancel the action. This
is because in this particular case `ui_textedit_begin` is called
instead of `ui_numedit_begin`. This function will not set
`data->startvalue` (leaving it at `0`) which will then trigger the
cancel in `ui_apply_but_NUM` which checks if the input changed (by
comparing the entered value with `data->startvalue`).
The fix makes sure that when `ui_textedit_begin` is called on a number
button, the `data->startvalue` is set correctly like in
`ui_numedit_begin`.
Breaking commit: rBSeb06ccc32462beaacbb114d6d0e450b6fc911047
Note: This also affects pressing tab to move to a new number field and
entering '0'. The fix will also cover this case.
Reviewed By: Severin, #user_interface
Maniphest Tasks: T88058
Differential Revision: https://developer.blender.org/D11168
