D1147 by @julien, with fixes/improvements
Duplicate bones where needed, otherwise use existing.
Keeps parent relations intact, can operate on parts of an armature.
Attempt to select closest bones when possible.
Occlusion query selection does't support this well because we can't
really derive depth information from occlusion tests. May be possible to
improve this somewhat in the future.
In fact, armature layers operators (set layers, and show all) were kind of messy and broken
in Edit mode (Select layers had two different operators for Pose and Edit modes, both
using the same funcs that could only work in Pose mode, Show All was supposed to be
used in both modes but again, its exec code could only work in Pose one).
Fixed that by:
* Using only one op for each task, for both modes (with adapted poll func).
* Replacing 'object from context' access by an helper that returns the right Armature
object in both Edit and Pose modes.
This commit splits editarmature.c and poseobject.c into several files, such that
certain types of functionality are (mostly) self-contained within particular
files (instead of being mixed in with other functionality in a large file).
In particular, this was done so that:
1) Armature EditMode tools are now in the armature_*.c files only, and Pose Mode
tools in pose_*.c files only.
- In one or two cases, this hasn't been possible as the two modes rely on
much of the same shared infrastructure.
2) The "clear loc/rot/scale" operators and pose show/hide are no longer housed
in editarmature.c
3) Selection operators, Transform operators, structural (add/delete) operators,
and supporting utilities for the modes (enter/exit/roll-calculations) are not
all interleaved in an ad-hoc manner
Notes:
* I've tried to ensure that the history of the new files has been maintained by
doing
svn copy {editarmature.c/poseobject.c} {armature_*.c/pose_*.c}
Unfortunately, this means that the diffs are a bit messy.
* There should be no functional/logic changes here. Just code moving around and
cosmetic comment tweaks where needed.
* #includes have largely been untouched for now, but could be cleaned up later
* CMake changes untested, but should work in theory.
* Added proper "update" operators in place of the abuse of the calculate
operators, so now the display ranges won't get overwritten everytime (with the
default values) you go to update the paths.
* Display range settings in properties editor now actually work. Before, the "In
Range" mode only displayed the entire paths.
Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
Thanks Torsten Rupp (rupp) for the patch!
This patch adds the abilities to sort the bone group list in the
properties panel and to move bone groups up/down in the list (similar
like for vertex groups)
Toggling options on the selection is better done as a generic operator.
Replace ARMATURE_OT_flags_set and POSE_OT_flags_set with WM_OT_context_collection_boolean_set and use menus to access it with specific settings.
This way its easy make a key shortcut which toggles any boolean on any collection - sequences, metaballs, objects, bones etc.
mouse coords would with cont. grab would wrap at short.
use mouse coords as int rather then short.
this problem still happens on linux because of XTranslateCoordinates
This tool automates the process of copying a pose to successive
keyframes, making it easier for animators to go back and change the
pose for some controls which remain "static" for periods of time.
Previously, animators would need to do a "{Ctrl-Pageup Ctrl-V} *
number_of_static_keyframes" dance for each set of controls that this
happened on, which is not too good ergonomically speaking.
There are two modes exposed via the menu (Pose->Propagate):
- "Pose Propagate" - also known as the 'WHILE_HELD' mode, which
propagates to all keyframes that are holding the same value
- "To Next Keyframe" - which only propagates the pose to the closest
keyframe in the occurring after (but not including) the current frame
Additionally, there are a few other modes that can be used, though
they are less useful for direct use from the UI, though they can be
used via the PyAPI as need be.
---
Also, I did some cleanups in the "Pose" menu to bring it more into
line with the Object mode one. There are some more tweaks that could
still be done here, such as bringing the keyframing operator entries
under a submenu too (as in the Object mode version) to get the length
of this under control.
- Custom properties are now affected by the Pose Sliding tools too.
This is now more important to support, given that modern rigs use
these a lot for facial expressions/posing. By and large, this should
work fine, though discrete integer values may experience a bit of
trouble
- Fixed potential bugs with the code which detects which F-Curves are
relevant to a PoseBone's transforms (+ custom props). This was prone
to being tricked by certain setups if the names of the bones contained
some of the keywords these were searching for.
- Shuffled some code around: moved bulk of logic out of vec3 case into
new function for single-value, since it was really doing per axis
already
* All the various index-related issues should finally be sorted now.
It seems you cannot just partially implement some of these active
index getter/setters...
* Standardised the call used by PoseLib operators to get the Object
from which they get the active PoseLib data from
* PoseLib operators which require some existing data to work now use a
poll() which checks for this
* Added back the operator used to make standard actions into ones
usable by PoseLib
* Added a dummy operator for the apply active pose button which really
just calls the same backend functions as "Browse Interactive", but
which has a nicer frontend (naming + description) for the purpose of
being used in this way
* Also, removed some useless code from here
This presents a UI from which PoseLibs can be assigned/removed from
Objects. From here, it is also possible to see the list of poses and
add/remove poses from this list.
Known Issues:
- [Py/RNA/Operators BUG ALERT!] If after immediately starting Blender
you try to remove a pose from the PoseLib using the UI buttons, you'll
get a an error the first time you do so (but not for subsequent
attempts). This seems to be caused by the "pose" enum (dynamically
generated) of the POSELIB_OT_pose_remove operator, which does not seem
to be getting initialised when the operator's exec gets called without
the invoke having been called previously
- Changing the active Pose Library still seems to be broken (to be
fixed soon)
Todos:
- Operator button to make the selected pose get shown in the 3d view
- Restore the "validate action" operator and add that to this panel
- Rename pose access
"Show All Layers"). This has been mapped to Ctrl-Accentkey
If necessary, you can alter your keymaps so that this operator is
invoked with its "all" property disabled. This will only toggle the
first row (first 16) layers, which is useful in most rigs for only
enabling all the layers with rig controls and not showing the layers
with rig mechanics.
it easier to reset a rig to its default pose again
- Refactored clear pose operators to separate out the common parts,
and made sure that they all had descriptions
Add Convert operator and button (missing in 2.5)
Fix stroke selection (uneeded separate operator and missing redraw)
Map sketch operators to LEFTMOUSE and RIGHTMOUSE instead of SELECTMOUSE AND ACTIONMOUSE (more in line with other sketching operators, might work better with swapped mouse buttons)
Moved some of the generic code used to determine the F-Curves linked to PoseChannel transforms (as used by the Pose Sliding tools) into a separate file, in preparation for migration of PoseLib tools to this system too. This should make it easier to add some useful new functionality to the PoseLib browsing system (pending in a later commit).
* Select Grouped
Selects bones in the same layer or same group as the selected ones. Optimised the code for the select same groups too.
* Flip Quats
Flips quaternion values so that the rotation progresses over a different path while maintaining the same endpoint orientations.
2. Add action parameter to Select_All_Toggle operators, rename to Select_All.
Options are Toggle (default), Select, Deselect, Invert (same as select swap). This makes it possible to map separate hotkeys for select all and deselect all.
NOTE for Aligorith: I didn't change animation operators for select_all which already had an Invert operator. These should be fixed eventually.
