Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
For projection painting tools besides the `DRAW` tool:
- Don't show the texture from viewport stencil drawing.
- Don't show the texture panel.
Based on D10564 by @lichtwerk with own changes.
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
When using particle mode, the particle tool settings were always
displayed, even if select/cursor is the active tool. This patch
hides the properties of the particle tools for non-brush tools,
using the same check as in other modes.
Differential Revision: https://developer.blender.org/D10266
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
Adopt some of the newer layout abilities to
clean up the Particle Tool Properties a bit.
- Use in-line check-boxes next to values.
- Use text heading for Preserve toggles and mirror/topology mirror.
Reads clearer. Uses less space. Is more consistent.
Reviewed By: #user_interface, pablovazquez, Blendify, campbellbarton
Ref D10130
Now the resolution can be reduced to get less details. This is very useful for doing storyboards to get a quick fill of any character.
Following UI review, the name "Resolution" has been changed to "Precision" because is more clear.
Differential Revision: https://developer.blender.org/D10076
Set property split in the higher level panel functions so that it carries
over to buttons added after. Also discard the redundant "Symmetry"
to make sure there is enough space for the checkbox label.
The now redundant "X" checkbox is removed since it's also present in the
Symmetry panel above. The Topology Mirror is moved into the Symmetry
panel also.
This was needed because `Mesh.use_x_mirror` has recently been turned into
different functionality, and its old functionality now lives under
`Mesh.use_mirror_vertex_group_x`. Something went wrong in the UI in This
transition.
Differential Revision: https://developer.blender.org/D9287
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
Mainly a UI adjustment, no functional changes
To have the default mode in the advanced panel as separated option is not the best solution.
Now, there is a pin option and when it is enabled, the brush keeps this mode.
Differential Revision: https://developer.blender.org/D8974
This adds XYZ symmetry as a property of meshes and updates all modes to
use the mesh symmetry by default to have a consistent tool behavior
between all modes and when switching objects.
Reviewed By: brecht, mano-wii, campbellbarton
Maniphest Tasks: T79785
Differential Revision: https://developer.blender.org/D8587
Sometimes interpolate all frames is not convenient and it's better, for example, interpolate in twos.
The new parameter allows to define the number of frame for each step, by default is set to 1 as before.
{F8812621}
This is a request of animators to improve interpolate tools.
Reviewed By: mendio
Maniphest Tasks: T80190
Differential Revision: https://developer.blender.org/D8723
239b0b
Many of these popovers could use a design pass in 2.91, but for 2.90 we
don't want to change any UI strings at this point, so the best way to
solve the cutoff text is to widen the popovers. Sadly this won't affect
popovers when other languages besides English have longer strings, but
solving that is a much larger task.
Another benefit is that tweaking sculpt / paint brush options feels much
less cramped with slightly wider popovers.
I only know of one string that is still slightly cutoff by default with
this patch, the "Max Element Distance" property of the pose brush in the
sculpt mode brush settings popover. But I didn't think it was worth
widening that popover more to deal with that one case.
Differential Revision: https://developer.blender.org/D8575
it's good to have an option to ' pin' a mode to the brush, to use that mode always, independent of the current viewport selected mode.
{F8723224}
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D8399
81a002
Keeping face attributes connected is now optional.
Keeping UV's connected is useful for organic modeling, but bad for
architectural.
Differential Revision: https://developer.blender.org/D8360
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
