Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02.
Tool system handlers had higher priority than the overlayed animation
"regions" (fake regions in fact). Give animation (and View2D) handlers
priority over toolsystem handlers.
Gizmo's still have higher priority, but I'll leave that unless there's a
reason to change.
What I removed here used to be needed in an earlier version of the
patch, to avoid use-after-frees. This is not the case anymore, so it
seems we can remove this.
Generally the context region code is very weak and inconsistent. If
things were done properly, the line I added shouldn't cause issues -
it's logically correct.
Also fixes T73475.
Enable and Disable Edit Menu items based on whether those actions are currently applicable.
https://developer.blender.org/D4846
Reviewed by Brecht Van Lommel
To issues caused this:
* The code to launch the filebrowser from a button didn't respect popup
menus stored in context
* There was actually no popup menu region stored in context for this
case. Doing so *may* introduce other issues, but the way I did things
already fixes all issues I've found.
I'm still not entirely sure what was going on - I know that the execute
region didn't get initialized correctly, but doing that at a later point
didn't fix the issue. Apparently forcing the header region to
re-initialize does fix it, even though I was sure this was redundant.
Also fixes a memory leak in UI code after preferences were opened.
This function is a very special refresh function just for floating
regions. _initialize is more consistent with ED_area_initialize() so use
that too.
Also adds assert.
Panel alignment was only updated when panel size changed. Now we can
also recognize changes in the category tabs offset and tag panels
for alignment updates.
`ARegion.alignment` unfortunately is a mixture of value and bitflag
enumerations. When checking for left/right/top/bottom region alignment,
the flags have to be masked out usually.
Most of the fixed cases here probably didn't cause issues in practice,
but could in fact break at any point when surrounding logic changes.
In fact the assert in #region_visible_rect_calc() failed in an older
file from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949035. This
fixes it.
It was too easy to end up with invalid region rectangles and we were
badly protected against them, so that they were hard to catch.
In fact we still create a main region for the top-bar, which ended up
getting a region height of -1. While this doesn't seem to have caused
issues in practice, we should prevent them entirely.
So idea was that at the end of region layout resolving,
`BLI_rcti_is_valid()` should return `true` for the region rectangle.
Further changes here ensure this is true: The `RGN_FLAG_TOO_SMALL` flag
is now set whenever there is not enough space for a region or if it
would get a size of zero or less.
Note: Should the assert fail, please do not just disable it and try to
actually address the root of the issue.
When splitting a Quad View by dragging a corner an quad area can become
negative size because of a one pixel offset to calculate the start of
the area.
This patch solves this to make sure that there are no negative areas. By
adapting the `ARegion.winrct`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6579
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Previously the decimation would take the whole curve into account when
decimating and not just the selected part.
This also contains various smaller bug fixes for the fcurve decimation.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6286
To recreate the main issue:
* Set render and file browser to show in full-screen in the preferences
* Default scene, press F12 in 3D View
* Press Alt+S to save the image
* Escape the file browser
* Escape the image editor
The former 3D View would now show the image editor. This is a common
use-case that should work.
Full-screen code is a hassle to get to work as expected. There are
reports from 2.5, I did lots of work years ago to get these kind of
use-cases to work fine. But apparently I broke this one with a fix for
another common use-case in March (0a28bb1422).
This now stores hints in the space, rather than the area, which should
make things much more controlable and hopefully help us fix issues like
this.
Here are a few references describing further common issues (all should
work fine now): 0a28bb1422, e61588c5a5, T19296
Checked over this with Bastien, we agreed that at some point we should
do a big rewrite of all of this, for now this is acceptable.
flipped to bottom
While flipping the header to bottom works in the MCE (because MCE doesnt
allow overlapping UI) we need to take the regions visible rect into
account for the Image Editor.
Also correct clickable scubbing area (poll for frame_change) in the
Image Editor and the MovieClip Editor not taking UI_DPI_FAC into
account.
Maniphest Tasks: T70905
Differential Revision: https://developer.blender.org/D6090
Incorrect cursor shown for horizontal split when selected from edge context menu.
Differential Revision: https://developer.blender.org/D6124
Reviewed by Campbell Barton
Only regions with alignment set should be toggle-able. If this is not
set, then the region is likely either a main region, or entirely hidden
by the user (not just collapsed).
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
If the file browser was opened from an existing file browser editor
(using File -> Append would make the mouse hover the file browser in the
Shading workspace), we need special handling for closing the fullscreen
area.
This change brings back the old way of handling fullscreen closing.
