Regression in recent undo system changes,
This caused T55048.
When each mode had its own undo stack it was important
to initialize it when entering edit-mode.
- Wasn't clear which functions handle edit-bones.
- Mixed both ebone and edit_bone in names.
- Didn't use ED_armature_* prefix for public API.
See P655 to apply to branches.
Free code should not handle ID refcounting at all. This has to be done
at higher level, since in some case we want to free (temp) data that
actually did not refcount at all its IDs.
This change seems to be working OK, but as usual in that area, only
lots of testing in real-case situation will say whether there are some
hidden bugs or not.
We can't have more than one NOTE_SUBTYPE in the same notifier.
This is a partial revert of: cd4d5dcb46. In particular to the part concerning
"Also fixed a missing notifier of the object instancing operator".
Not only this was mixed with the original reason for the commit for no reason,
but it actually introduced a bug. Bad, bad developers ;)
Note: Although this commit is not needed for master, blender2.8 requires it for
the forementioned bug report.
This makes code closer to id_override/assent-engine ones, which
introduce a new type of linked data, and hence reserve
ID_IS_LINKED_DATABLOCK to real linked datablocks.
New code was handling correctly ID's internal references to self, but
not references between 'made real' different objects...
Regression, to be backported in 2.79.
'Convert To...' Object operation has very weird effect of actually
working at obdata level, not object level, which means *all* objects
(even unselected/hidden/in other scenes/...) using same obdata will be
converted to new selected type.
IMHO this is very bad behavior, but... not a bug really, so do not
change this for now.
But at least, do not do that when working on some linked data, else it
leaves Blend file in invalid (incoherent) state until next reload.
So workaround for now is to enforce the 'Keep Original' option when some
linked object/obdata is affected by the operation.
Also fixed somewhat broken usercount handling in Curve->Mesh part.
That's a quick hack to address that specific case, new pointer IDProp
actually enlights a generic problem - datablocks using themselves - which
is not really handled by current code, would consider this not-so-urgent
TODO though.
Meshes w/o modifiers wouldn't have their derived mesh applied.
Check was to avoid crash but its in fact meaningless,
since the modifier might be disabled, or there may be virtual modifiers.
Main issue here was that in old usercount system 'user_real' did simply
not allow that kind of thing to work. With new pait of 'USER_EXTRA'
tags, it becomes possible to handle the case correctly, by merely refining
checks about indirectly use objects whene removing them from a scene.
Incidently, found another related bug, 'link group objects to scene' was not
incrementing objects' usercount - bad, very very bad!
Was a waaaaayyyyy to much generic name for such a specific func, renamed
to much more descriptive BKE_libblock_relink_to_newid().
In near future (few weeks, to limit as much as possible silent mismatch
in branches), will rename BKE_libblock_relink_ex to BKE_libblock_relink,
this is the real generic data-block relinking func!
This aims at always ensuring that ID.newid (and relevant LIB_TAG_NEW)
stay in clean (i.e. cleared) state by default.
To achieve this, instead of clearing after all id copy call (would be
horribly noisy, and bad for performances), we try to completely remove
the setting of id->newid by default when copying a new ID.
This implies that areas actually needing that info (mainly, object editing
area (make single user...) and make local area) have to ensure they set
it themselves as needed.
This is far from simple change, many complex code paths to consider, so
will need some serious testing. :/
All objects were being parented to a single instance of each parent
object, instead of their respective instances, when using dupliverts or
dupligroups.
Behavior was caused by the `persistent_id[0]` (vertex/face id) being
ignored when computing `parent_gh` hash, which caused all instances to
have the same hash, and thus only the first one was included.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2370
Code would try to add multiple time the same key in `parent_gh` (for this
ghash a lot of dupliobjects may generate same key).
Was making the tool unusable in debug builds.
Also optimise things a bit by avoiding creating parent_gh when only
`use_base_parent` is set.
Another great example of inconsistency in usercount handling - dupli_group was considered
as refcounted by readfile.c code (and hence by library_query.c one, which is based on it),
but not by editor/BKE_object code, which never increased group's usercount when creating
an instance of it etc.
To be backported to 2.78.
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
This is in fact very hairy situation here... Objects are only refcounted by scenes,
any other usage is 'free', which means once all object instanciations are gone Blender
considers it can delete it.
There is a trap here though: indirect usages. Typically, we should never modify linked data
(because it is essencially useless, changes would be ignored and ost on next reload or
even undo/redo). This means indirect usages are not affected by default 'safe' remapping/unlinking.
For unlinking preceeding deletion however, this is not acceptable - we are likely to end with
a zero-user ID (aka deletable one) which is still actually used by other linked data.
Solution choosen here is double:
I) From 'user-space' (i.e. outliner, operators...), we check for cases where deleting datablocks
should not be allowed (indirect data or indirectly used data), and abort (with report) if needed.
II) From 'lower' level (BKE_library_remap and RNA), we also unlink from linked data,
which makes actual deletion possible and safe.
Note that with previous behavior (2.77 one), linked object would be deleted, including from linked data -
but then, once file is saved and reloaded, indirect usage would link back the deleted object,
without any instanciation in scene, which made it somehow virtual and unreachable...
With new behavior, this is no more possible, but on the other hand it means that in situations of dependency cycles
(two linked objects using each other), linked objects become impossible to delete (from user space).
Not sure what's best here, behavior with those corner cases of library linking is very poorly defined... :(
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
Being granular means we need to re-build depsgraph a bit more often..
The issue was caused by rigidbody requiring some special nodes to
handle physics which were not created with just tagging object for
update.
Also re-reported through IRC by Thomas Beck (@plasmasolutions), thanks.
Though it's not ideal in theory, we have quite poor handling of object datablock currently
from user PoV - before this commit, it was not easily possible to get fully rid of an object
anymore if you did not removed it from all its groups before deleting it.
So for now, restore 2.76 behavior (namely, unlink an object from avaerything in Blender
once it is no more used by any scene).
Better handling of all this is TODO for later (also related to much more heavy changes
done in id-remap branch regarding sanitizing our ID deletion process).
BKE_main_id_tag_/BKE_main_id_flag_ were horrible naming now that we split those
into flags (for presistent one) and tags (for runtime ones).
Got rid of previous 'tag_' functions behavior (those who were dedicated shortcuts
to set/clear LIB_TAG_DOIT), so now '_tag_' functions affect tags, and '_flag_'
functions affect flags.
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
