* Removed nAction struct. We'll be using good ol' bAction structs again, but putting new data in a different list. Apart from that, the data is similar enough to do so.
* Rearranged code in DNA_action_types.h while renaming the structs to avoid confusion over what is currently in use...
* Added freeing and AnimData execution loops for many other ID-types too. (NOTE: I've added AnimData in NodeTree struct too, but it's not clear to me where the relevant data-management calls should go in Nodes code).
* File writing code should now only write the new data to files
Cleanup warnings from Joshua's commit (mostly unused variables,
but also used functions that were not prototyped).
Two bugfixes; passing on &ob->adt instead of ob->adt
But; the DNA system is now messed up, with two structs using
the same ID (nAction and bAction), that goes horrible wrong!
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
- Depricated another bunch of globals; all the totobj,
totmesh, totvert, and so on.
- All code that needs such totals now count it themselves,
these stats were not supposed to be reliable
- Editmesh now stores and manages own totals.
- Todo: make a scene->stats that tracks notifiers.
Bugfix: selecting failed in editmesh, backbuffer stuff was
too late, already using index ranges before it was set.
Instead of many commits, here 1!
- Constraint edit code back
- Removed XXX stubs for constraints
(make parent follow path works)
- Removed XXX stubs for armature
(make parent deform, do center, etc works)
- Found a bad uninitialized global Scene * in code, especially
in kernel it wreaked havoc.
- added missing include in blenkernel/brush.c
- fixed Nicholas' fix for editmode subsurf crash
(It needed to check for editmode)
Put back Armature/Pose code, including 'heat weight'.
I've added reeb.h to get things compile, but Martin will
cleanup files and put back?
Now where to put all vertexgroup code.... I guess mesh?
Note for msvc: yep, another new dir to add! :)
- remove Verse support. This will be brought back in The Future (probably jiri + me)
This means 5k lines less in blenkernel.
- fix two small errors for global cleanup, now compiles properly with FFMPEG enabled too.
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
So, editmode mesh is back! :)
At the moment only TABkey works and mouse select, 1 vertex at a
time. More will follow of course.
Note for the devs:
- G.editMesh has been removed, be careful with old code.
- EditMesh now is property of Mesh itself
Although it means unlimited editmodes, for migration purposes we
better stick to 1 "obedit" per scene, which is in Context too
- G.obedit will get removed soon, so use CTX_data_edit_object(C)
Or if you can't, just scene->obedit for now
- Also removed the CTX_data_edit_mesh(), this has no meaning
anymore. EditMesh is not context senstitive anymore, only the
edit-object for time being is.
- Martin: I've already tucked some EditMesh pointer in T and
removed all G.editMesh there.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
* When making a proxy, the lib linked IPO driver was also changed to
point to the proxy object, and after undo this local proxy object
was replaced so the pointer became invalid. In fact it is not needed
at all to change this because the IPO code maps the pointer to the
local proxy object already.
* Undoing the make proxy operation would crash because the proxy_from
pointer in the library linked object would still point to the removed
object. Now it clears all these pointers before undo, because on each
undo memory file read they will be set again anyway.
- removed ugly clamping function (it was dividing XYZ based on max of
one of the values)
- added option to use Exposure, this only works for brightness (Y).
results look very pleasant, foggy and hazy results are possible.
with exposre==0, no exposure happens for HDR extreme range skies,
this is how yafray rendered it.
- added menu for choosing color spaces (CIE = modern lcds)
Please review! (and yes i know it's still not in World :)
- Added blending mode and factor option, so it's more clear and
controllable what happens with it. Also nice for crazy effects
of course!
- Preview render now shows preview for it too
On the todos:
- have this in World buttons (as well) for quicker sky setups
- review math of color clamping and scaling, this is definitely
not good... but a fix will make old files look very different.
The Physics button controls the creation of a physics representation
of the object when starting the game. If the button is not selected,
the object is a pure graphical object with no physics representation
and all the other physics buttons are hidden.
Selecting this button gives access to the usual physics buttons.
The physics button is enabled by default to match previous Blender
behavior.
The margin parameter allows to control the collision margin from
the UI. Previously, this parameter was only accessible through
Python. By default, the collision margin is set to 0.0 on static
objects and 0.06 on dynamic objects.
To maintain compatibility with older games, the collision margin
is set to 0.06 on all objects when loading older blend file.
Note about the collision algorithms in Bullet 2.71
--------------------------------------------------
Bullet 2.71 handles the collision margin differently than Bullet 2.53
(the previous Bullet version in Blender). The collision margin is
now kept "inside" the object for box, sphere and cylinder bound
shapes. This means that two objects bound to any of these shape will
come in close contact when colliding.
The static mesh, convex hull and cone shapes still have their
collision margin "outside" the object, which leaves a space of 1
or 2 times the collision margin between objects.
The situation with Bullet 2.53 was more complicated, generally
leading to more space between objects, except for box-box collisions.
This means that running a old game under Bullet 2.71 may cause
visual problems, especially if the objects are small. You can fix
these problems by changing some visual aspect of the objects:
center, shape, size, position of children, etc.
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
(partial because I'll merge all snap code in one fell swoop after the libs are done)
----------------------------------
object: ray - boundbox intersection test
=======================
Caching and Baking:
- The point cache is now cleared on DAG_object_flush_update(), and not cleared for time dependency graph updates.
- There is now a Bake button instead of Protect. Also cache start and end frames were added to softbody and particles.
- The cloth autoprotect feature was removed.
- The Ctrl+B menu now also bakes cloth and particles next to softbody and fluids. Additionally there are now frree bake and free cache menu entries.
- The point cache api has been changed. There is now a PTCacheID struct for each point cache type that can be filled and then used to call the point cache functions.
- PointCache struct was added to DNA and is automatically allocated for each physics type.
- Soft body now supports Bake Editing just like cloth.
- Tried to make the systems deal consistently with time ipo's and offsets. Still not sure it all works correct, but too complicated to solve completely now.
Library Linking:
- Added some more warnings to prevent editing settings on library linked objects.
- Linked objects now read from the cache located next to the original library file, and never write to it. This restores old behavior for softbodies. For local simulation the mesh and not the object should be linked.
- Dupligroups and proxies can't create local point caches at the moment, how to implement that I'm not sure. We probably need a proxy point cache for that to work (ugh).
Physics UI:
- Renamed deflection panel to collision for consistency and reorganized the buttons. Also removed some softbody collision buttons from the softbody panel that were duplicated in this panel for cloth.
- Tweaked field panel buttons to not jump around when changing options.
- Tabbing e.g. Soft Body Collision into the Soft Body panel, it now only shows Collision to make the panel names readable.
- I tried to make enabled/disabling physics more consistent, since all three system did things different. Now the two modifier buttons to enable the modifier for the viewport and rendering are also duplicated in the physics panels. Toggling the Soft Body and Cloth buttons now both remove their modifiers.
- Fixed modifier error drawing glitch.
Particles:
- Particles are now recalculated more often than before. Previously it did partial updates based on the changes, but that doesn't work well with DAG_object_flush_update() ..
- Fixed memory leak loading keyed particle system. Now keys are not written to file anymore but always created after loading.
- Make particle threads work with autothreads.
Continue Physics:
- The timeline play now has a Continue Physics option in the playback menu, which keeps the simulations going without writing them to the cache.
- This doesn't always work that well, some changes are not immediately updated, but this can be improved later. Still it's fun to get a feel for the physics.
Todo:
- Point cache can get out of sync with and undo and changing a file without saving it.
- Change the point cache file format to store a version (so old point cache files can be either converted or at least ignored), and to do correct endian conversion.
- Menu item and/or buttons for Ctrl+B.
- A system("rm ..") was changed to remove() since the former is very slow for clearing point caches. These system() calls were already giving trouble in a bug in the tracker, but really most use of this system("") should be changed and tested.
- The Soft Body Collision and Clot Collision panel titles don't mention there's point cache settings there too, doing that makes them unreadable with the default panel setup.. but may need to make the names longer anyway.
