Added back the 'corner cut pattern' as an operator property for subdivide operator.
Not added for knife yet, since operator redo doesn't seem to be working at all -
already logged in the tracker.
Only source/blender/editors/ dir, should not give errors on different platforms
Only removing: UI_*.h, ED_*.h, WM_*.h, DNA_*.h, IMB_*.h, RNA_*.h, PIL_*.h
is now just used to set the rotation property value during invoke.
This removes some reliance on 3d view info for non-interactive use, and also lets you specify
new object's locations/rotations explicitly when calling from Python.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
useful for python but in rare cases this also happens for users.
Active layer getting out of sync is an old bug but hard find when it happens.
This at least fixes segfaulting on adding objects.
Removing old add tube operator and replacing it with add cylinder. The resulting operator is called add tube, since that's the name in the menu. Other people can debate about the name and change it later if they feel like it.
bpy.ops.mesh.primitive_torus_add(major_radius=1, minor_radius=0.25, major_segments=48, minor_segments=16)
- experemental dynamic menus, used for INFO_MT_file, INFO_MT_file_import, INFO_MT_file_export and INFO_MT_mesh_add. these can have items added from python.
eg.
- removed OBJECT_OT_mesh_add, use the python add menu instead.
- made mesh primitive ops - MESH_OT_primitive_plane_add, ...cube_add, etc. work in object mode.
- RNA scene.active_object wrapped
- bugfix [#19466] 2.5: Tweak menu only available for mesh objects added within Edit Mode
ED_object_exit_editmode was always doing an undo push, made this optional using the existing flag - EM_DO_UNDO, called everywhere except when adding primitives.
Notifiers
---------
Various fixes for wrong use of notifiers, and some new notifiers
to make things a bit more clear and consistent, with two notable
changes:
* Geometry changes are now done with NC_GEOM, rather than
NC_OBJECT|ND_GEOM_, so an object does need to be available.
* Space data now use NC_SPACE|ND_SPACE_*, instead of data
notifiers or even NC_WINDOW in some cases. Note that NC_SPACE
should only be used for notifying about changes in space data,
we don't want to go back to allqueue(REDRAW..).
Depsgraph
---------
The dependency graph now has a different flush call:
DAG_object_flush_update(scene, ob, flag)
is replaced by:
DAG_id_flush_update(id, flag)
It still works basically the same, one difference is that it now
also accepts object data (e.g. Mesh), again to avoid requiring an
Object to be available. Other ID types will simply do nothing at
the moment.
Docs
----
I made some guidelines for how/when to do which kinds of updates
and notifiers. I can't specify totally exact how to make these
decisions, but these are basically the guidelines I use. So, new
and updated docs are here:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/NotifiersUpdateshttp://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers
Operator goodies!
--- Macro operators
Operators now can consist of multiple operators. Such a macro operator
is identical and behaves identical to other opererators. Macros can
also be constructed of macros even! Currently only hardcoded macros are
implemented, this to solve combined operators such as 'add duplicate' or
'extrude' (both want a transform appended).
Usage is simple:
- WM_operatortype_append_macro() : add new operatortype, name, flags
- WM_operatortype_macro_define() : add existing operator to macro
(Note: macro_define will also allow properties to be set, doesnt work
right now)
On converting the macro wmOperatorType to a real operator, it makes a
list of all operators, and the standard macro callbacks (exec, invoke,
modal, poll) just will use all.
Important note; switching to a modal operator only works as last in the
chain now!
Macros implemented for duplicate, extrude and rip. Tool menu works fine
for it, also the redo hotkey F4 works properly.
--- Operator redo fix
The operators use the undo system to switch back, but this could give
errors if other actions added undo pushes (buttons, outliner). Now the
redo for operator searches back for the correct undo level.
This fixes issues with many redos.
Note for brecht: removed the ED_undo_push for buttons... it was called
on *every* button now, which is probably too much? For example, using
the 'toolbar' redo also caused this...
* 3D view Mesh menu works again, but incomplete.
* Add Properties and Toolbar to 3D View menu.
* Added "specials" menus back, vertex/edge/face and general.
* Various fixes in existing mesh operators, some were not working.
* Add MESH_OT_merge.
* Merge all subdivide ops into MESH_OT_subdivide, subdivide code
changes to make smooth + multi give good results.
* Rename all select inverse ops to *_OT_select_inverse.
* Fix "search for unknown operator" prints at startup, and some
warnings in py code.
* Don't run .pyc files on startup.
* Remove unused image window header C code.
* Rename BIF_transform/retopo.h to ED_transform/retopo.h
for consistency.
* Move MESH_OT_duplicate_add to editmesh_add.c.
* Remove some code from BIF_gl.h which is not needed there
anymore.
* Context panel now draws without header, with arrows, no scene name.
* Softbody vertex group search popup.
* Improve names for autogenerated shortcut keys in menus.
* Make most Select menus in the 3D view header work.
* Fix armature border select selection syncing.
* Add POSE_OT_select_constraint_target,
MESH_OT_select_by_number_vertices, MESH_OT_select_vertex_path.
* Merge mesh select similar into one operator.
* Don't give MESH_OT_select_random Space hotkey.
* Add DAG_object_flush_update to many mesh edit tools, not calling this
will crash with modifiers.
* RNA_def_enum_funcs for dynamic enums in operators, but not very useful
without context yet.
* Fix refresh issue with image window header + editmode.
* Fix drawing of shadow mesh for image painting.
* Remove deprecated uiDefMenuButO and uiDefMenuSep functions.
* Remove keyval.c, code is in wm_keymap.c already.
* Rename WM_operator_redo to WM_operator_props_popup.
Part one (of probably many :) of Operator review/validation.
Nothing final nor defined, it's reseach :)
- Added tool buttons in "Toolbar" (Tkey). Just four examples
for objectmode, and six for mesh editmode.
(Review in progress is operator internal state vs context, what
do redo exactly, undo vs redo syncing, when op->invoke or not,
etc. This has to be pinned down exactly and frozen asap)
- On undo, clear redo-operator-stack for now (won't work)
- Added call to better detect active/current view3d region.
ED_view3d_context_rv3d(C)
- Fixed some operators that missed correct redo (add-prim etc).
Later more fun!
EditMesh *EM_GetEditMesh(Mesh *me);
void EM_EndEditMesh(Mesh *me, EditMesh *em);
as discussed on the mailling list, this is to facilitate migration to bmesh.
next step is to merge this this to the bmesh branch. this was done in the 2.5
branch to prevent too great a divergance.
also, made makesdna/makesrna work on cygwin/msvc2008/scons.
- use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop
- Each select all operator was using slightly different wording...
select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle
- selection -> select
- POSE_OT_select_connected -> POSE_OT_select_linked to match other operators
- NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators
- ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators
- NODE_OT_fit_all -> NODE_OT_view_all to match other operators
- View2D_OT_* -> VIEW2D_OT_* to match VIEW3D
- View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical
- removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect
- MARKER_OT_mouseselect -> MARKER_OT_select
- GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups
- MESH_OT_removedoublesflag -> MESH_OT_remove_doubles
- redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete
renamed selection operator properties
extend_select -> extend
column_select -> column
select_children_only -> children_only
... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name.
Updated docs
http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
- Mesh Rip back (Vkey). For those who keep wondering how
it works: just put mouse cursor somewhere close to the
selection, press V and mouse mouse away from it. Feels
like real rip!
- Made extrude sorta work, no menu/options yet though.
But it does transform!
- Added an short event->mval[2] with region coords,
easier coding for the guys :)
- Fill operator standard delivers 'beauty' now
Big commit, but mainly adminstration.
- Enabled ot->flag OPTYPE_UNDO to work.
- Removed all redundant ED_undo_pushes, but I'd
recommend everyone to check it while testing. :)
- Added view manipulations as OPTYPE_REGISTER,
although this will flood the redo stack a bit...
Nevertheless; for a "redo last action" panel we
can simply check if both flags are set for redo.
- Bugfix in editmode undo: selectmode was cleared,
so you couldn't select after undo
- Bugfix in mixing tweaks and keymaps... solution
works but is weak, need to think over a while.
Edit mesh:
- fixed compile, shul only committed the function declaration, not
the code for 'make fgon'.
- Put the Fgon option under:
ALT+F: make fgon
SHIFT+ALT+F: clear fgon
(note, SHIFT+F = fill :)
- Fixed loop select to use two booleans, as Martin pointed me
correctly at! Using 1 variable was lazy coding.
- Edit mesh: Add ctrl+click add vertex or extrude.
I've made it not move the 3d cursor in that case.
Also found out tweak events conflicted with existing
keymap definitions; on tweak failure (= no mousemove)
it now passes on the mouse event as 'mouse down' for
the remaining keymaps to check.
These then actually respond to mouse-up instead of down...
The location in the keymaps where tweaks get generated
remains important. Examples:
1 - 'select' mouse-handler, operator return pass-through
2 - tweak handler checks, and makes tweak event
3 - grabber responds to tweak event
1 - ctrl+mouse tweak handler checks, makes tweak event,
or passes event on
2 - if tweak event, it runs lasso
3 - else when passed on, ctrl+click extrude happens
In the first case, select works on mouse-down, immediate.
In the second case, extrude happens on mouse-release, even
though the keymap defined mouse-press.
This will make designing nice balanced keymaps still not
simple; especially because you can't tell operators to
pass on the key... although we can add the convention that
select-mouse operators always pass on to enable tweaks.
Still a good reason to wait with custom keymaps
when this is fully settled!
- Made WM_cursor_wait() work without context or pointers,
like old waitcursor(). Only use when operations entirely
block UI. It will set waitcursor for all open windows.
- Cleanup in mesh tools, removing old cruft, and prepare
for more goodies for shul to work on!
View3D four-split: added box-clip for the three ortho
windows. Is all on by default, waiting for headers and
buttons to come back.
Also: hotkey for foursplit now also removes it (toggle)
Also: window_to_3d() function only did delta's,
renamed it to window_to_3d_delta and coded a
real window_to_3d()
View3D has been split now in a local part (RegionView3D) and a
per-area part (old View3D). Currently local is:
- view transform
- camera zoom/offset
- gpencil (todo)
- custom clipping planes
Rest is in Area still, like active camera, draw type, layers,
localview, custom centers, around-settings, transform widget,
gridlines, and so on (mostly stuff as available in header).
To see it work; also added new feature for region split,
press SHIFT+ALT+CTRL+S for four-split.
The idea is to make a preset 4-split, configured to stick
to top/right/front views for three views.
Another cool idea to explore is to then box-clip all drawing
based on these 3 views.
Note about the code:
- currently view3d still stores some depricated settings, to
convert from older files. Not all settings are copied over
though, like custom clip planes or the 'lock view to object'.
- since some view3d ops are now on area level, the operators
for it should keep track of that.
Bugfix in transform: quat initialize in operator-invoke missed
one zero.
Als brought back GE to compile for missing Ipos and channels.
