The was caused by 8b347fc2cd as the old BONESEL_NOSEL flag
handled the -1 case (used for none).
Instead of checking for -1, remove these elements from the array
as selection code makes decisions based on the number of hits detected.
When reproject a stroke sometimes is good to keep the copy of the original stroke to create volume effects
Related to T77639
{F8603513}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77639
Differential Revision: https://developer.blender.org/D7963
50258
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
When use the Tint tool, it was very difficult to tint the filled areas if the strokes had very few points or the area was big.
Differential Revision: https://developer.blender.org/D7936
- ED_object_constraint_list_from_constraint was get_constraint_lb
- ED_object_constraint_list_from_context was get_active_constraints
- ED_object_constraint_active_get was get_active_constraint
- ED_object_constraint_active_set was ED_object_constraint_set_active
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
Functionality here has become confusing over time,
this removes duplicate, similar functions, preferring to set the mode
instead of toggle, enter, exit.
Mode switching utility function behaved differently regarding undo,
'ED_object_mode_toggle' for example didn't skip the undo push
where 'ED_object_mode_set' did.
Some callers chose these functions based on the intended undo behavior,
even when toggling didn't make sense.
There was also ED_object_mode_generic_enter which was similar to
ED_object_mode_set, instead of the reverse of ED_object_mode_generic_exit.
Simplify object mode switching internals:
- Replace ED_object_mode_generic_enter with ED_object_mode_set.
- Remove ED_object_mode_toggle as nearly all callers needed to check
the current mode so toggling would set the mode argument correctly.
- Use ED_object_mode_set for the object mode switching operator
to simplify logic.
- Add ED_object_mode_set_ex which has an argument to disable undo,
needed when loading undo data needs to set the mode.
- Remove unused ED_object_mode_exit.
This is a temporary solution for T77173 for the 2.83 release. D7203
provides a more long term solution for future releases.
This adds theme colors for the three report backgrounds, setting them
to the color used in 2.82. A separate commit in the addons repository
will follow for changes to the bundled themes.
Differential Revision: https://developer.blender.org/D7908
- uiTemplateID: Straightforward, just const for the template
and the functions it calls
- uiTemplateCacheFile: Create a function in rna_ui.c because
the generated RNA callback doesn't have const context.
Differential Revision: https://developer.blender.org/D7895
This code was made obsolete by the changes to the animation editor
scrubbing areas in D4654.
Differential Revision: https://developer.blender.org/D7898
- Interactively adding primitives with two clicks.
- Scene orientation used for new objects.
- Depth [view-plane, axis-plane, surface]
- Origin [base, center]
- Primitive types [cube, cylinder, cone, uv-sphere, ico-sphere ]
- Settings for object types in the top-bar.
Shortcuts:
- Snapping (Ctrl).
- Constrain 1:1 aspect (Shift).
- Toggle center (Alt).
Part of T57210 design task.
Generic snap gizmo to be used for different tools.
The Gizmo can be configured initially by the following properties:
- `"snap_elements_force"`, `"prev_point"`
The following properties can be read as return:
- `"location"`, `"normal"`, `"snap_elem_index"`
This property can be linked to another (tool_setting.snap_elements):
- `"snap_elements"`
And this 3 extra utilities have been added:
- `ED_gizmotypes_snap_3d_draw_util`,
- `ED_gizmotypes_snap_3d_context_get`,
- `ED_gizmotypes_snap_3d_update`.
Differential Revision: https://developer.blender.org/D7071
This implements a general system to implement drag and drop, subpanels,
and UI animation for the stack UIs in Blender. There are NO functional
changes in this patch, but it makes it relatively trivial to implement
these features for stacks.
The biggest complication to using panels to implement the UI for lists
is that there can be multiple modifiers of the same type. Currently there
is an assumed 1 to 1 relationship between every panel and its type, but
there can be multiple list items of the same type, so we have to break
this relationship. The mapping between panels and their data is stored
with an index in the panel's runtime struct.
To make use the system for a list like modifiers, four components
must be added:
1. A panel type defined and registered for each list data type, with a
known mapping between list data types and panel idnames.
1. A function called by interface code to build the add the panel
layouts with the provided helper functions.
- UI_panel_list_matches_data will check if the panel list needs to
be rebuilt.
- UI_panels_free_instanced will remove the existing list panels
- UI_panel_add_instanced adds a list panel of a given type.
3. An expand flag for the list data and implementations of
get_list_data_expand_flag and set_list_data_expand_flag.
4. For reordering, the panel type's reorder callback. This is called
when the instanced panels are drag-dropped. This requires
implementing a "move to index" operator for the list data.
Reviewed By: Severin, brecht
Differential Revision: https://developer.blender.org/D7490
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
Due to recent changes clicks in the node editor would trigger a
depsgraph update resulting in too many redraws. This patch limits
the updates to when workbench shown in texture mode in any visible
screen.
There are still cases where too many updates are created. For example when
there are a Cycles render viewport and a Workbench texture viewport on the
same screen.
This fix is meant as a workaround. The actual fix should add a mechanism
to the depsgraph and the viewports should check if they need to be redrawn.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7830
This feature was added when Blender used tex-face (per-face images),
but doesn't make as much sense since this was removed.
Removing this from UV edit-mode as this wasn't working in any
of the 2.8x releases, causing UV's to be visible but unselectable.
Resolves issue raised in T76958.
Pressing 'E' over a number button to pick a distance was keeping
left-right arrows instead of using the eye-dropper cursor.
Workaround this by clearing the active button before setting the cursor.
Previously the playback mode "Frame Dropping" would not drop the correct
number of frames which would lead to slow playback.
For example, the playback target is 60fps. However we can only muster
around 32 fps.
The delta frames from the last step is in this case ~1.98 or so.
With the previous code, we would floor this. That would lead us to step
forward one frame each time, effectively playing back the animation at
half the speed as we will try to render every frame.
To fix this we simply save the remaining fraction from the previous
frame and use it to compute the current frame step.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D7694
In this case giving `CTX_wm_menu()` priority over `CTX_wm_region()` is all
that's needed and makes sense (since we want exactly the hovered button, not
some other active button in the region/menu hierarchy).
The situation with pop-ups is still tricky, see T73565. But as a first step
it's probably good to let functions be more explicit about what they want when
querying UI context. So I added a variation of a UI-context function for cases
like this.
Previously the playback mode "Frame Dropping" would not drop the correct
number of frames which would lead to slow playback.
For example, the playback target is 60fps. However we can only muster
around 32 fps.
The delta frames from the last step is in this case ~1.98 or so.
With the previous code, we would floor this. That would lead us to step
forward one frame each time, effectively playing back the animation at
half the speed as we will try to render every frame.
To fix this we simply save the remaining fraction from the previous
frame and use it to compute the current frame step.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D7694
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
