Introduce new PropertyRNAOrID structure, storing most useful data about
an 'opaque' PropertyRNA in relation with a given PointerRNA struct.
It deals with all the three cases (pure static RNA, runtime RNA where
data is actually stored in IDProperties, and pure IDProperties, aka
custom data.
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
Every Particle Simulation node has a name (or a path when it is in a node group).
This name has to be used in the Simulation modifier on a point cloud to see
the particles.
Caching has been disabled for now, because it was holding back development
a bit. To reset the simulation, go back to frame 1.
Currently, there is no way to influence the simulation. There are just some
randomly moving points. Changing that is the next step.
Duplication and deletion code of modifiers was totally wrong for
particle system, that special weird thing needs its own custom
management.
Note that for now I chose not to duplicate the particle settings ID when
duplicating the modifier...
This adds a notification type for shaderfx so the properties editor can
be properly notified to redraw.
Another possible solution would be to also redraw the shaderfx tab
with a ND_MODIFIER update, but this solution allows us to avoid
some unecessary redraws too. There were no existing cases of
ND_OBJECT | NC_MODIFIER updates, so those cases were
removed from buttons_area_listener.
Differential Revision: https://developer.blender.org/D8159
For historical reasons, `DupliObject::persistent_id` was of size
`2*MAX_DUPLI_RECUR`. These reasons are now gone, and the persistent ID
always gets exactly one array element for every dupli-recursion.
Differential Revision: https://developer.blender.org/D8222
Reviewed by: brecht
The ocean modifier has two properties that use a [0, 10] hard min and
hard max. The values act as factors though, so it makes more sense to
use sliders and a 0 to 1 range.
This commit also bumps the file subversion to avoid repeatedly applying
the change to the properties' range.
Differential Revision: https://developer.blender.org/D8186
Changed variable names from mmd, mds, mfs, and mes to fmd, fds, ffs, and fes. The author of this commits lights a candle for all the merge conflicts this will cause.
There was a discrepancy between the Tooltip of the Camera's Background Image that controls the opacity of the image and the operator's name that reads Alpha. The tooltip says **"Image opacity to blend the image against the background color"**, so it was renamed to Opacity to follow the tooltip.
The decision for this change is that the naming Alpha is not the most appropriated, since it has nothing to do if a loaded image has an embedded Alpha channel or not.
{F8540101}
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7760
I spotted a duplicate struct declaration, so I had to check for other duplicated as well
There might be some other but i am not confident enough for deleting them
this regex search for duplicate ^(.*;)$\n(\1)$
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D8146
This resolves one of the last few areas where we still use inappropriate
abbreviations. Reading abbreviated words is usually slower, because
users must parse, guess and translate the words. Using abbreviations
such as 'rot' is also especially bad since it's a word in itself too.
The main advantage of abbreviations is that they are faster to *write*,
which just isn't a concern for text in the UI.
Differential Revision: https://developer.blender.org/D8174
The eigenvectors in the ocean modifier (plus and minus) can be useful,
but are not exposed. Assuming the particle system was capable, the
eigenvectors could be used to drive spray emission velocities.
This exposes the controls to allow a map to be generated from these
eigenvectors. Currently, the values are mapped into a 0-255 range
similar to foam.
Differential Revision: https://developer.blender.org/D7182
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
Added an offset field to control when to load the simulation files. Since this is a very small but helpful addition it is in my view safe to commit at this point of the bcon cycle.
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
Note that this code is rather rough and slightly hacky, a proper
solution needs to be designed at some point probably, but for now this
should work fine.
As usual, master collections and root node trees remain TODO for now.
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
This is important at several level, mainly for overrides currently.
Note that this also includes shape keys, since from RNA point of view
those are also 'embedded' (they are not editable, not linkable, ...).
Since makesrna runs after all properties have been defined, we have to
remember with a new internal flag when we explicitely disable the
'PROP_PTR_NO_OWNERSHIP' flag for a property.
Otherwise there was no way to do so for ID pointer properties...
Enabling offset property caused strip to produce `SEQ_CACHE_STORE_RAW`
type image, which is kept in temp cache and is not invalidated.
Change update functions for all properties of effect strips that affect image
to `rna_Sequence_invalidate_raw_update`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8132
Don't auto update render passes in nodes when unregistering render passes or
quitting Blender, this should only happen on explicit user action to change the
engine or passes.
This patch fixes T77878 in the same way that T72747 was fixed.
A hard minimum for the voxel size was added to avoid an arithmetics error.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8027
Blender has an operator to do Copy & Paste of constraints between
objects and bones, but no simple method to do that directly via
the Python API is provided. This adds a copy() method to object
and pose bone constraint collections.
Differential Revision: https://developer.blender.org/D8112
