*NOTE*: Some UI decision done in this commit will most likely be revised, all flame shall go in /dev/null. Constructive discussions of course welcomed.
This commit merges manipulator orientation selection back in "traditional" transform.
That's how it works:
- The dropdown in the 3D view header is always visible
- The orientation chosen will be used when choosing an axis with MMB and for the *second* key press of X,Y,Z
However, Local orientation doesn't use the one calculated by the manipulator. This is to ensure that multiple object local and armatures in pose still works as before.
- Alt-Space (to change the orientation) works during transform
New Transform orientation: View, using the view axis.
Fixes for the following bugs:
- Constraint projection code "jammed" if input vector was <0,0,0>, reported a couple of times on IRC. Thanks to Basse for the example file.
- Transform on texspace crashed on objects without texspace data (camera, lamp, ...). This was reported in tracker.
- Numinput with lock constraints didn't work correctly. Reported on elysiun
Probably some others that I'm forgetting
I also moved a couple of functions around in an attempt to make things clearer.
- With Actions on a Pose, ESC in transform restored wrong.
This is solved similar to ipos now, storing a 'last time evaluated'.
Could be extended to ghosting... soon.
- Moving the little yellow 'key blocks' in Action window didn't update
3d window. ALso the 'lock' option didn't work, and flashed header.
- Pose Transform: noticed there were still errors in cases, especially
with actions. Painfully tried to build the desired matrix now.
- Removed obsolete Bone pointer from TransData
The B-Bones!
(where the B can be read as 'block' or 'bezier' or 'b-spline')
- set option on/off in edit buttons, armature panel
- scaling of B-bones only works in editmode, use ALT+S to make bones fatter
or thinner. Also works for constrainted transform
- In pose mode, you now have a buttons panel with per-bone settings too
Here you can find the "segments" button, which allows bones to
interpolate between previous/next bones, including roll.
- Buttons to control interpolation ("In" and "Out" are disabled, doesn't
work satisfying yet
NOTE: this doesn't give deform yet! Main purpose for now is to test if this
drawing method serves to animate/pose armatures well.
Still need to review proper interpolation methods... maybe bezier is too
limited.
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
MEMSET was clearing the TransInfo struct after the constraint setup call has been made.
Temporary fix until the manipulator transform init is split off, like normal transform.
- Splited off the event treatment into a fonction of its own
- Splited off the initialisation phase into a function of its own (will have to do it for the manipulator function too)
Calling transform now works like this:
initTransform(mode, context)
- possible post init calls, constraints mostly
Transform()
- eventually, the postTransform function, so that Transform is just a simple big loop which could in the end just be tied in the blender event system instead.
- Added a state variable in TransInfo to replace the ret_val local variable. Possible values are: TRANS_RUNNING, TRANS_CANCEL, TRANS_CONFIRM
- Tied MMB and the hotkey select for constraint together, so selecting an axis with MMB and pressing the axis key after that goes to local mode on that axis. Much less confusing.
Martin; I've added calls like:
BIF_TransformSetUndo("Add Duplicate");
In advance of calling transform itself, to indicate that this is the
string name to be used for Undo, and also has to be done on ESC.
To make that possible I had to add a memset() to zero the global struct
TransInfo. Nicely done with if(Trans.mode==TRANS_INIT)
Not sure how this relates to setting constraints in advance... I always
found it tricky to work a non-initalized global struct. :)
Hope Martin likes this simple hack. :)
Also; added flag in constraint to denote whether its local or not. That
way its possible to:
- prevent local scale and rotate on multiple objects to change own position
- draw constraint lines cleaner
Main change is that it's an own Space type now, not part of the Audio
window... the audio window should restrict to own options. This way
functionality is nicely separated.
Since it's the first time I added a new space (since long!) I've made an
extensive tutorial as well. You can find that here:
http://www.blender3d.org/cms/Adding_new_Space_Window.557.0.html
Notes for using timewindow;
- Add time markers with MKey
- CTRL+M gives option to name Marker
- Markers cannot be moved yet...
- Pageup-Pagedown keys moves current frame to next-prev Marker
- Xkey removes Markers
- If an object has Ipos or an Action, it draws key lines
- CTRL+Pageup-Pagedown moves current frame to next-prev Key
- Press S or E to set start/end frame for playback
Notes about the implementation in Tuhopuu:
- Add new Marker now selects new, deselects others
- Selecting Marker didn't work like elsewhere in Blender, on click it
should deselect all, except the indicated Marker. Not when holding SHIFT
of course
- Not exported functions are static now
- Removed unused defines (MARKER_NONE NEXT_AVAIL)
- Drawing order was confusing, doing too many matrix calls
- Removed not needed scrollbar, added new function to draw time values.
(Has advantage the MMB scroll works not confusing on a scrollbar)
- Added proper support for 'frame mapping'
- The string button (name Marker) had a bug (checked str[64] while str
was only 64 long)
- String button itself didn't allow "OK on enter"
- Made frame buttons in header larger, the arrows overlapped
- Removed support for negative frame values, that won't work so simple!
because Martin recoded the Mirror().
- removed old globals like 'tottrans' or 'centre' or 'centroid' as used
by old transform
- removed a lot of code from editobject.c
- moved all transform related code to transform_conversions.c
(Note for Martin; sorry that's a mess... it now has all the weird
functions for finding posemode dependencies... thats for the depgraph
phase to remove)
MMB click with no constraint selects a constraint right away (the axis selector doesn't flash on screen)
MMB click with a constraint removes the constraint
MMB click-drag in both case (with and without a constraint) uses the axis selector.
stopConstraint didn't remove the CON_SELECT flag, so cancelling transform while selecting a constraint and then reentering transform was funny. Fixed
Split the conversion fonctions and sorting functions from transform.c into transform_conversions.c
Update MSVC 6.0 projectiles and SConscript accordingly.
Editview still included transform.h, replaced that for BIF_transform.h, the external include.
