Future operators can use the same code,
so it is moved up to disassociate it from decimate
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12489
Ref: D12489
This patch renames:
* tDecimateGraphOp to tGraphSliderOp
* dgo to gso (to match with the struct rename)
* decimate_reset_bezts to reset_bezts to indicate it can be used by other functions
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12490
Ref: D12490
The code to store an original bezt array previously lived in
`graphkeys_decimate_invoke`.
Since future graph slider operators will need this function as well,
it has been extracted.
No functional changes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12487
Ref: D12487
An int flag is used to filter animation channels for
operators to work on. The flag was duplicated multiple times.
This patch removes the duplication by creating a constant
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12486
Ref: D12486
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
This is available in the DopeSheet, GraphEditor, and NLA Editor.
Currently:
- Dopesheet advertises to take selection into account...
-- ...but doesnt - which might be a mistake in rBe3842d1ca4dd
- Graph Editor does not mention selection...
-- ...and also does not take it into account
- NLA does not mention selection...
-- ...but takes it into account
Now:
- make them **all** take selection into account (you can still do a
quick 'Select All' prior to get the full range -- better than not being
able to set this based on selection)
- mention this for all in the tooltip
- also reword to 'Set Preview Range to Selected' since using the term
'Auto' impilies this would change on selection change.
Maniphest Tasks: T91743
Differential Revision: https://developer.blender.org/D12651
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.
Differential Revision: https://developer.blender.org/D12353
This patch implements the generic slider from
`ed_draw.c` to the `GRAPH_OT_decimate` operator
This draws a useful UI and enables precision mode and stepping
Overshoot is disabled
The status message is moved to the workspace footer
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9361
Ref: D9361
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
Selection of an FCurve with box/circle select now selects the entire
curve and all its keys:
- Box selecting a curve selects all the keyframes of the curve.
- Ctrl + box selecting of the curve deselects all the keyframes of the
curve.
- Shift + box selecting of the curve extends the keyframe selection,
adding all the keyframes of the curves that were just selected to the
selection.
- In all cases, if the selection area contains a key, nothing is
performed on the curves themselves (the action only impacts the
selected keys).
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D11181
The "Paste Flipped" operator was missing its own tooltip.
This patch adds the tooltip by implementing the `get_description` callback for
`GRAPH_OT_paste` and `ACTION_OT_paste`.
Reviewed By: sybren
Maniphest Tasks: T87037
Differential Revision: https://developer.blender.org/D10859
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
When NLA strips weren't time-aligned with the underlying action, then
fcurve modifiers would not be drawn anchored to the strip. Fmodifiers
were evaluating properly, they just weren't drawn with the proper
offset and scale.
To fix it in this specific case, I've chosen to undo the keyframe
remapping then remap the draw-evaluation-time from scene time to
fcurve time. Afterward, I redo the keyframe remapping so the controls
are properly drawn.
The Envelope fmodifier has special drawing code which was fixed too. In
this case, no mapping at all was happening. The solution was similar,
to remap the envelope control points from fcurve time to scene time.
Fix keyframe properties not being editable when animating a
library-overridden datablock.
The problem was that RNA pointers were created based on the datablock
affected by the animation (for example an Object), instead of the
datablock that contains the FCurve itself (the Action). The latter can
be local to the current blend file and should thus be editable, even
when the former is not.
Reviewed By: mont29
Maniphest Tasks: T81965
Differential Revision: https://developer.blender.org/D10091
confirmation
Deleting keyframes in the dopesheet or graph editor always required
confirmation, even if used ouside of the "Delete" menus.
Now add a "confirm" option [same as for deleting objects], which can be
disabled for immediate keyframe deletion.
This will also change the default behavior and bring this in line with
how object deletion works so there is one shortcut for bringing up the
menu/confirmation and another shortcut to delete immediately without
requiring confirmation / another click:
- Blender Default keymap: "X" for menu, "Del" for immediate
- Industry Compatible: "Backspace" for menu, "Del" for immediate
Maniphest Tasks: T70316
Differential Revision: https://developer.blender.org/D9651
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
