Currently unused, but will allow to keep of an owner of the depsgraph.
Could also simplify other APIs in the future by avoiding to pass bmain
explicitly to relation update functions and things like that.
In weightpaint it is possible to enable the bone selection mode. During
drawing the overlay was rendered, but during selection this was ignored.
Users needed to double click in order to select bones even when the overlay
was enabled.
This patch makes bone selection possible during weight painting using the pose mode bone
selection overlay with a single click.
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D5629
The object color property is added as an additional output in
the Object Info node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5554
But in the future the selection code may also be used in object mode (eg for snapping).
So to avoid using too much VRAM resources, it is good to avoid drawing all objects in the viewport.
The solution was to create an array with only objects that are detected within the selection area.
If the selection operator is modal, objects already detected are not removed from the array until view3d is moved or orbited.
To detect the object, its BoundBox is tested.
Since the Select Engine does not have a dedicated depth texture, whenever a new object is "found" the depth of the objects in the array already drawn is redrawn.
Reviewers: campbellbarton, fclem
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5435
It is easier to deal with private values of the DRW_select engine and gives room for improvement.
Reviewers: campbellbarton, fclem
Differential Revision: https://developer.blender.org/D5415
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
This commit moves the API of selecting faces, vertices and edges to a DRW manager engine.
Reviewers: campbellbarton, fclem
Subscribers: jbakker, brecht
Differential Revision: https://developer.blender.org/D5090
Init the scene of the draw context when selecting. When using face dot selection on
when the subsurf modifier is active on the cage, the scene needs to be
valid. It is read from the context in the
`DRW_mesh_batch_cache_create_requested` and used in the `isDisabled`
method of the SubSurfModifier.
Reviewers: fclem, sergey
Differential Revision: https://developer.blender.org/D5214
Following the advices of @Germano Cavalcante (mano-wii) , I have exposed as a workaround the free function to be called from draw manager for selection.
Now, the free function is not called for selection inside gpencil draw_scene, but it's called from draw_manager.c.
The real fix would be create a new Scene_finish callback in draw manager, but as the release of 2.80 is almost here, we fix this with a workaround that must be removed when new callback is in place.
Differential Revision: http://developer.blender.org/D5193
When doing image rendering with grease pencil, it reused the view of
workbench or EEVEE. These views might be offsetted due to TAA.
This shifted the view a tiny bit. We will not reset the view in between
render engines.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5171
Grease Pencil already reset the default view so the draw_manager wouldn't assert. During multi view rendering the same assert still happened. This patch will reset the default view when starting to render a new view.
Reviewers: fclem
Differential Revision: https://developer.blender.org/D5137
Migrate old legacy code to the draw mamager/object mode. The old legacy
version did not work with wireframe. By migrating the code
to modern draw manager code we have mode control on the drawing process.
Still background images do not work with OIT, the cause seems to be that the transparent pixels are treated as background pixels.
Also There are some artifacts when working with Holdouts and DoF, this
is because the draw engines do not pass the correct alpha values.
Reviewers: fclem, brecht
Differential Revision: https://developer.blender.org/D4638
When performing F12 render on a transparent film all solid objects where
a bit transparent. Single Pass AA and no AA passes were not visible at
all.
Issue was that the first frame was not handled correctly making these
artifacts. This commit changes the order of `GPU_state_init` and
`DRW_state_reset` so the state is correct during the first pass.
The OpenGL state was not set to blender defaults when using
`DRW_render_to_image` path. This is only used when doing F12-rendering.
Cause of changes with the `RESTART_INDEX` hair rendering was rendering
the restart_index as an actual vertex index.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5039
Centralize logic for when to use the PBVH for drawing, fix missing tests in
mask drawing, fix missing tests for multiple windows, only do more expensive
update for all viewports at end of the stroke.
The draw manager used to determine if the view transform should be
applied by checking if the scene was not rendered to an offscreen image.
As the sequencer and texture painting needs to render to an offscreen
image with the view transform applied we need to separate the
`do_color_management` from the `is_image_render`.
Reviewed By: fclem
Maniphest Tasks: T64849
Differential Revision: https://developer.blender.org/D4909
More accurate determination when to draw the PBVH and when to draw the
regular mesh. PBVH drawing is done for Multires, Dyntopo and normal
sculpting with no active modifiers.
Maniphest Tasks: T62070
Differential Revision: https://developer.blender.org/D4731
A lot of drawcalls don't use the object's properties and don't
need a dedicated DRWCallState. We allocate a unique one at
the begining and use it for all calls that uses the default
unit matrix.
Fix for GPencil and Cycles Render draw type. GPencil objects were only
shown when overlays were turned on. The cause of this is an
optimization we did to not populate any draw engine when an
external renderer was used with overlays turned off.
This will check if there is any visible GPencil object in the scene. if
so it will still perform the loop.
`DEG_id_type_any_exists` can check if any object of a certain type_id is in the
result. This check is also being used to check if there are any
visible grease pencil objects as a precheck in `DRW_render_check_grease_pencil`.
Reviewed By: brecht, fclem, antoniov
Maniphest Tasks: T65191
Differential Revision: https://developer.blender.org/D4962
Remove the clear allocation flag as it has little impact since there should
be very few allocation per redraw.
Make BLI_memblock_alloc and BLI_memblock_iterstep much more cache efficient
removing them almost entirely from performance profiles.
