This node doesn't only support point clouds, it supports any geometry
component type with points, so meshes, curves, and point clouds.
We could explicitly list them to add a warning for volumes, but
that wouldn't really have any practical benefit, and isn't done
elsewhere.
As part of the refactor to the node declaration builders, we had hoped
to add a regular expression specifically for these socket names, but
recent discussions have revealed that using the translation marker
macros is the preferred solution.
If the names and descriptions were exposed to RNA, these would not
be necessary. However, that may be quite complicated, since sockets
are all instances of the same RNA types.
Differential Revision: https://developer.blender.org/D13033
Calling `remove_unused_references` inside the `modify_geometry_sets` loop
was known to be not entirely reliable before. Now I just moved it out of
the loop which fixes the bug.
This fixes one (of possibly multiple) root issues. The collection passed into
the Collection Info node must not contain the current object, because that
would result in a dependency cycle and recursive instancing.
The text is just too long, it doesn't fit in the node width,
and the tooltips display the property names well enough,
since they aren't used as often as other settings.
Also display the text in lite builds too, there is no reason not to.
That makes the node more useful by default.
One use case is to delete some points after the Set ID node, then instance
with some randomness. Now when deleting different points, the
randomness will remain stable.
Subdivision surface: Both geometry sockets renamed to "Mesh"
Points to Volume: Use "Points" and "Volume" names
Distribute Points on Faces: Use "Mesh" input name
These are meant to provide a hint to users which type each
node is meant to use.
These nodes allow accessing and changing the stable/random ID used
for motion blur with instances and stable randomness.
Since rB40c3b8836b7a, the stable ID is a built-in attribute, so to be
consistent and allow changing it in the node tree like other built-in
attributes, it has get and set nodes.
The call to `attribute_try_get_for_output` does some cache invalidation
internally. Under some circumstances the call to `position_evaluator.evaluate()`
recomputed the caches (e.g. when the Normal node was used, the evaluated
handle positions cache on curves were updated). After the positions have
been updated in the Set Position node, the cache was not invalidated again.,
leading to incorrect rendering.
The proper solution will be to do the cache invalidation in `OutputAttribute.save()`
again. That is a bit more involved though. For now just reorder the code a bit
to do the cache invalidation after the field has been computed.
There is a follow up task: T92509.
Previously, every node had to create warnings for unsupported input
geometry manually. Now this is automated. Nodes just have to specify
the geometry types they support in the node declaration.
Differential Revision: https://developer.blender.org/D12899
Instance IDs serve no purpose for rendering when they aren't stable from
one frame to the next, and if the index is used in the end anyway, there
is no point in storing a vector of IDs and copying it around.
This commit exposes the `id` attribute on the instances component,
makes it optional-- only generated by default with the distribute points
on faces node.
Since the string to curves node only added the index as each instance's
ID, I removed it. This means that it would be necessary to add the ID
data manually if the initial index actually helps (when deleting only
certain characters, for example).
Differential Revision: https://developer.blender.org/D12980
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
Previously, the field on every socket was logged for later use. This had
two main negative consequences:
* Increased memory usage, because the fields may contain a lot of data
under some circumstances (e.g. a Ray Cast field contains the target geometry).
* Decreased performance, because anonymous attributes could not be
removed from geometry automatically, because there were still fields that
referenced them.
Now most fields are not logged anymore. Only those that are viewed by a
spreadsheet and constant fields. The required inputs of a field are still
logged in string form to keep socket inspection working.
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
This patch improves performance by only assigning
or calculating data for connected sockets.
It is recommended that artists use the lowest dimensions setting
for noise based textures. E.g. Use 2D instead of 3D where possible.
Using a scoped timer and single thread on 256,000 points.
Smooth F1 3D : Debug build
Timer 'Optimised' took 9.39991 s
Timer 'Normal' took 16.1531 s
This optimisation is only for GN and not shaders.
Differential Revision: https://developer.blender.org/D12985
Also use consistent UI names for properties that are similar between
that node and the points to volume node (which happen to be shorter,
allowing the node to be narrower).
This adds an option to fill the ends of the generated mesh for
each spline combination with an N-gon. The resulting mesh is
manifold, so it can be used for operations like Boolean.
Differential Revision: https://developer.blender.org/D12982
Issue is that the Instance on Points node currently expects that all
instance references are used (see `remove_unused_references`).
This should be fixed at some point, but for now make sure that
the String to Curves node does not output unused references.
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
This replaces the boolean Offset input in the Set Position node with
a vector input. This makes the node easier to use. Using a "Position"
input as an "Offset" sounds wrong anyway.
The Position and Offset inputs are evaluated at the same time.
The versioning only works correctly when the Offset input was not connected
to something else before.
Differential Revision: https://developer.blender.org/D12983
This commit makes sure that each attribute name is only added once
when logging geometry values for attribute search.
The `attribute_foreach` function for a single geometry component
deduplicated names, but a much more common situation is to have
more than one component in the instances of a geometry set.
Differential Revision: https://developer.blender.org/D12959
This patch renames the node "String Substring" to "Slice String"
to conform to the "verb first" naming convention.
Default length is also changed to 10 to make it easier for users
to understand what the node does.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12931
This node takes a geometry set with instances as input and outputs
points located on the origins of the top level of instances in the
geometry set (not nested instances). It also has position and radius
inputs to allow overriding the default, and a selection input to only
generate points for some instances.
The use case for this node is a method to use geometry proximity on
instance origins, but in a more generic way that is flexible and useful
in other situations.
Differential Revision: https://developer.blender.org/D12893
Previously, when the start input was greater than the end input,
the spline was resized to a single point. That is correct, but the
single point wasn't placed properly along the spline. Now, it is
placed according to the "Start" value, as if the trim started, but
couldn't continue because the "End" value was smaller.
This behavior is handled with a separate code path to keep each
simpler and avoid special cases. Any cleanup to reduce duplication
should focus on making each code path shorter separately rather
than merging them.
Also included are some changes to `lookup_control_point_position`
to support cyclic splines, though this single-point method is still
disabled on cyclic splines for consistency.
Because `segment_is_vector` didn't handle the combined cyclic and
single control point case, it returned false, that the "segment" should
have the resolution evaluated point count. To avoid checking the size in
every call, add an assert for the size and check it elsewhere.
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
This adds attribute search to the geometry nodes modifier
for the input and output attributes. The "New" search item
is only shown for the output attributes.
Some of the attribute search code is extracted to a new file
in the interface code, to avoid some code duplication.
The UI code required two fixes so that the search would work
for dynamic length strings (IDProperties do not have a fixed size).
Since this does changes to the UI layout of the modifier, I also
addressed T91485 here.
Differential Revisiion: https://developer.blender.org/D12788
This commit makes the bounding box node work on each unique geometry
(including instances) individually instead of making one large bounding
box for everything. This makes the node much faster, and is often the
desired result anyway. For the old behavior, a realize instances node
can be used in front of this node (versioning adds it automatically).
The min and max outputs now only output the values from the realized
geometry.
Differential Revision: https://developer.blender.org/D12951
There were some issues when multiple inputs of the same node
were forced to be computed (e.g. for the spreadsheet), but none
of the node outputs (if existant) were used. Essentially the node
was marked as "finished" too early in this case.
This fix is necessary for the improved viewer node (T92167).
