As Wayland doesn't support moving the cursor, draw a cross-hair cursor
at the location used by Blender.
Without this, the cursor was locked at the location where grab started,
making some actions unusable since the cursor location was invisible.
Resolves T77311.
When interacting with translate/rotate/scale gizmo, show the gizmo while
it's in use. There are some exceptions to this, as showing all scale
gizmos while scaling causes the gizmos to become large & distracting so
in this case only the gizmo being dragged is shown.
Resolves T63743.
Some operators OR'ed the existing flags in a way that made it seem
the value might already have some values set.
Replace this with assignment as no flags are set and the convention
with almost all operators is to write the value directly.
These changes make the curves sculpt mode keymap consistent
with other modes. They now show up in the keymap, for potential
editing of tool shortcuts, etc. I don't fully understand this system,
but at least these changes should make it consistent.
Differential Revision: https://developer.blender.org/D15112
Add `bpy.app.is_job_running(job_type)` as high-level indicator. Job
types currently exposed are `WM_JOB_TYPE_RENDER`,
`WM_JOB_TYPE_RENDER_PREVIEW`, and `WM_JOB_TYPE_OBJECT_BAKE`, as strings
with the `WM_JOB_TYPE_` prefix removed. The functions can be polled by
Python code to determine whether such background work is still ongoing
or not.
Furthermore, new app handles are added for
`object_bake_{pre,complete,canceled}`, which are called respectively
before an object baking job starts, completes sucessfully, and stops due
to a cancellation.
Motivation: There are various cases where Python can trigger the
execution of a background job, without getting notification that that
background job is done. As a result, it's hard to do things like
cleanups, or auto-quitting Blender after the work is done.
The approach in this commit can easily be extended with other job types,
when the need arises. The rendering of asset previews is one that's
likely to be added sooner than later, as there have already been
requests about this.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14587
The tweak tool was toggling node selection twice, as the selection
key-map is already accounted for in the node key-map there is no need
to duplicate the actions in the tweak tool.
After removing the default 'Home' shortcut for "Frame All", a NDOF (3D
Mouse) default shortcut was still available for the operator. The event
filtering introduced in 4357fb63db was missing the NDOF filtering
logic. So while the context menu correctly found the NDOF keymap item,
its actual shortcut change/removal code incorrectly filtered out the
NDOF keymap items and thus failed to find the item.
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
The wm_gesture_tag_redraw function was only called on mouse move, so the
flip state preview was not updating just by pressing the F key.
Reviewed By: Severin
Maniphest Tasks: T83519
Differential Revision: https://developer.blender.org/D9779
Dropping would pass the name of the ID to drop to the properties of the
drop operator. This would then lookup the ID by name. With linking
and/or library overrides, multiple IDs of the same name and type may
exist, which is why the session UUID should be used instead. All
operators used for dropping support this now and the drop code passes
the session UUID instead of the name.
Also see 917c096be6 and 8f79fa9c67.
Some drop operators were already using the session UUIDs. This converts
the remaining ones. The "name" property is kept working as before, since
some scripts use this.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, which was the case for some of these operators, and
its value won't be remembered over multiple executions of the operator.
Both were not at all useful from what I can tell, and I doubt this was
done intentionally.
There are now some generalized helpers for passing IDs from drag & drop
to operators via operator properties, mostly introduced in 917c096be6
and 8f79fa9c67. These can be used in a bunch of places to reduce
duplicated code and explicitly share a common solution.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, and its value won't be remembered over multiple
executions of the operator. Both were not at all useful from what I can
tell, and I doubt this was done intentionally.
Continuation of 8f79fa9c67 and 917c096be6. The ID's session UUID is
now always priotitized over its name to lookup the ID from drop-box or
operator properties. bc3dbf109c shows what happens if the name happens
to be set for whatever reason and the session UUID isn't prioritized.
More and more of the drop operations are being switched to use the ID's
session UUID rather than the name, but the cleanup after a drop operator
was cancelled assumed they would set the name. They will now first
attempt to use the session UUID and fallback to the name if needed.
When saving from the menu the region was not set,
causing the last region in `area->regionbase` to be used
as the region was assigned before comparison.
917c096be6 applied to objects only, this also applies the same fix for
the general 3D View drop operations, e.g. used for dragging materials,
images, worlds, etc.
This is needed to fix T95706, but apparently something else is still
going on. Needs further investigation.
Steps to reproduce were:
- Open Clip Editor
- Call "Open Clip" (e.g. Alt+O)
- Select video file
The file wouldn't be loaded into the Clip Editor.
Caused by 7849b56c3c.
This is part of a fix for T88570, where the file selector would crash
when activated multiple times.
Calling save multiple times would free the operator, leaving a dangling
pointer which was used when panels were visible that accessed the
"active_operator".
Reviewed By: Severin
Ref D14905
Existing code to replace the file operation was failing when done from
the window for the file operation itself.
Basically, this patch does two things:
- Implement a well defined window context to use as the "owner" or
"root" of the File Browser. This will be used for managing the File
Browser and to execute the file operation, even after the File Browser
was closed.
- Ensure the context is valid when dealing with file File Browser event
handlers.
Previously the window context just wasn't well defined and just happened
to work well enough in most cases. Addressing this may unveil further
issues, see T88570#1355740.
Differential Revision: https://developer.blender.org/D13441
Reviewed by: Campbell Barton
- In some cases it avoids using strlen on the result.
- Use ATTR_NONNULL for all arguments.
- Remove NULL pointer check for WM_operator_bl_idname src argument.
- Rename from/to to src/dst.
Refactoring event click-drag detection broke click detection for
simulated events. Resolve this by sharing logic for update previous
values in `wmWindow.eventstate` for regular event handling
(no functional changes for non-simulated events). Failure to detect
clicks for simulated events broke the undo test
`test_undo.view3d_multi_mode_select` in `../lib/tests/ui_simulate/run.py`.
All undo tests now pass.
When saving from the menu the region was not set,
causing the last region in `area->regionbase` to be used
as the region was assigned before comparison.
Steps to reproduce were:
- Open Clip Editor
- Call "Open Clip" (e.g. Alt+O)
- Select video file
The file wouldn't be loaded into the Clip Editor.
Caused by 7849b56c3c.
This is part of a fix for T88570, where the file selector would crash
when activated multiple times.
Calling save multiple times would free the operator, leaving a dangling
pointer which was used when panels were visible that accessed the
"active_operator".
Reviewed By: Severin
Ref D14905
The acquire locking of the draw manager introduced other issues.
The current implementation was a hacky solution as we know that the
final solution is something totally different {T98016}.
Related issues:
* {T97988}
* {T97600}
The acquire locking of the draw manager introduced other issues.
The current implementation was a hacky solution as we know that the
final solution is something totally different {T98016}.
Related issues:
* {T97988}
* {T97600}
Existing code to replace the file operation was failing when done from
the window for the file operation itself.
Basically, this patch does two things:
- Implement a well defined window context to use as the "owner" or
"root" of the File Browser. This will be used for managing the File
Browser and to execute the file operation, even after the File Browser
was closed.
- Ensure the context is valid when dealing with file File Browser event
handlers.
Previously the window context just wasn't well defined and just happened
to work well enough in most cases. Addressing this may unveil further
issues, see T88570#1355740.
Differential Revision: https://developer.blender.org/D13441
Reviewed by: Campbell Barton
This is because some drivers / GPU actually still do double buffer swapping
but others don't. Adding this do ensure the background color of the first
redraw.
Note that this fix was not tested on the problematic hardware and might not
solve the issue.
This should have no functional changes.
This reduce the complexity of the shader by only supporting 2 colors.
We never use more than 2 color in practice and this makes usage not require
a UBO.
While relatively minor issue, it could become fairly annoying in a big
project, since once an ID is tagged as directly linked it tend to remain
as such.
Now also force indirect tagging when loading new IDs as part of a lib
relocation process, since the ones actually directly linked will be
tagged as such later on.
There were two calls to access job's custom data. One of them
ignored job type, the other one ignored job owner.
Now there is a single function to access job's custom data.
If the job type or owner is not relevant NULL or WM_JOB_TYPE_ANY
can be passes explicitly.
Differential Revision: https://developer.blender.org/D14803
