Bugfix #21255: Clear track operator did not remove TrackTo constraints too. This could still be made to do Locked Track and other tracking constraints later too, but for now this will do.
Added a system for running a callback on all the ID-blocks referenced by constraints (like for modifiers). Also, added an API function which calls these on the constraints present in the given list.
These could be used for:
- the proxies + action/pyconstraint fix that campbell committed
- simplification of file loading code
Made the 'Offset Factor' setting use a separate variable from the 'Offset' setting in the DNA stuff. While we could get away with this sort of thing in the past, it turns out that with the Datablocks viewer these days, settings sharing an internal var but with different ranges/behaviour doesn't work well anymore, since later instances override earlier ones.
I've removed editmesh altogether (other then scanfill, which is
seperate code that happens to reuse the editmesh structures).
The compatibility layer I had written for old editmesh tools
was more trouble then it was worth, though it did help in the
early stages of this project.
There's a fair amount of breakage, and there's bunches of tools
(mostly minor ones) I need to port over still. Biggest ones are
join triangles and loop to region, and spin/screw.
This probably isn't really testable, I'll hopefully have more
work done on this soon, but might not be before next week.
Rotations are now stored internally as radians, while exposing degrees in the UI -
in the graph editor and UI controls. This is done in two areas:
1) Using the unit system to convert RNA data to display as degrees in the UI controls
2) FCurves now use degrees for rotation, so you can edit in the graph editor what
you see in the UI.
All rotation data is consistently accessible in DNA and RNA as radians, degrees are only
used for the UI controls and graph editor.
This commit includes conversions will convert old files (stored data and also fcurve data)
to the new units, hopefully everything should go smoothly!
Part of this also changes a few properties that were hard-coded as degrees before (such
as IK pole angle and brush texture rotation) to also use the same consistent system of
radians (dna/rna) and degrees (ui).
Thanks to Joshua for hints and review here too.
Most likely will not compile for others, I'd appreciate any build errors
and missing files reports (I can never seem to get everything committed
and all the build systems working without help).
Porting over the sculpt/multires tools was a breeze,
thanks goes to brecht for a design that didn't exclude
ngons and was easy to port.
Note that I've not tested externally-backed multires
file support yet. Also, I still need to write version
patch code for some cases.
Some notes:
* Like trunk, topological changes don't update multires right,
so e.g. subdivide will duplicate multires data on the new faces,
instead of subdividing it.
* If you set the debug value (ctrl-alt-d) to 1 it'll turn on
my experiments in speeding up sculpting on higher-res multires
meshes (but note it makes partial redraw not completely accurate).
* There's a bug where you have to go through editmode to get out
of sculpt mode, not sure if I inherited or created this myself.
- Offset parameter of the path constraint has no effect on the animation
- Path animation was being repeated multiple times even though it was not supposed to
* Removing duplicate api functions
* Shuffled around newly added api functions to make the ordering more consistent
* Fixes for a few bugs in the api functions as I checked over them
* Replaced most of the #defines for flags and modes with enums
- renamed .add() to .new() for rna collection functions since they dont add an existing item.
- remove 'name' as an argument from the new driver target function, better to keep the api minimal and let scripters use the data api for editing values after.
- added some api functions to keep rna api from becoming a mess.
Action Constraints were failing when the rotation mode was non-default. Fixed this by copying over the current rotation mode when creating temp elements to evaluate with.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
At last, this commit introduces the Spline IK Constraint to Blender. Spline IK is a constraint that makes n bones follow the shape of a specified curve.
Simply add a chain of bones, add a curve, add a Spline IK Constraint to the tip bone and set the number of bones in the chain to make it work. Or, try the following test file:
http://download.blender.org/ftp/incoming/250_splineik_spine01.blend
Screenshots of this in action (as proof):
http://download.blender.org/ftp/incoming/b250_splineik_001_before.pnghttp://download.blender.org/ftp/incoming/b250_splineik_001_after.png
I've implemented this in a similar way to how standard IK solvers are done. However, this code is currently not an IK plugin, since I imagine that it would be useful to be able to combine the 2 types of IK. This can be easily changed though :)
Finally, a few notes on what to expect still:
* Constraint blending currently doesn't affect this. Getting that to work correctly will take a bit more work still.
* Options for not affecting the root joint (to make it easier to attach the chain to a stump or whatever), and non-uniform scaling options have yet to be added. I've marked the places where they can be added though
* Control over the twisting of the chain still needs investigation.
Have fun!
This is effectively a C-port of Nathan Vegdahl's "No Twist" TrackTo PyConstraint, and has been added as a separate type of constraint to be consistent with the existing constraints (Locked Track, and Track To).
In general, this works considerably better than the existing "Track To" constraint, since it works by determining the smallest rotation necessary to get the current orientation of the owner to an orientation which would be tracking the target. It is also a much more straightforward approach than the weird old method the old Track To uses.
I've made a few tweaks to the code to deal with the (hopefully rare) cases where the target and the constrained are coincident. These don't appear to cause too much trouble in general.
TODO:
- Probably the naming of the constraints will change, to better convey their purposes. Naming suggestions welcome.
This (biggish) commit generalises the rotation modes functionality added for Bones, allowing Objects to use the various Euler Rotation orders, Axis-Angle, and Quaternion rotation representations.
I've also cleaned up the nomenclature of the rotation-related settings so that the naming styles are more consistent with each other. Unfortunately, this will break all files involving object or bone rotation animation made in 2.5 versions (2.4x will still get correctly converted).
General Notes:
* By default, Objects still default to using Eulers, while Bones will use Quaternions by default still.
* I've fixed all areas that I'm currently aware of to work with these changes. However, there are probably a few places where I've missed a few changes (i.e. auto-keyframing will need attention later).
* Removed the old "IPO-Keys" stuff from Transform code. I'm unlikely to restore this in the near future, and trying to fix that to include support for this commit would have been too much work.
Drivers can now be copied/pasted for single properties, allowing drivers set up on one property to be added to a few other properties relatively easily.
Also, added description strings for the other driver-button operators.
* Path Constraint option (i.e. this creates a follow-path constraint but doesn't actually parent the object to the curve) works now. Fixed a crash here too.
* Follow Path option (i.e. parent the object to the curve, and follow it), is not working correctly yet. Some matrix seems to get set wrongly.
* Copy Rotation constraint "should" work ok for custom rotation orders now. It now converts both rotations to the form used by the owner. So far, this doesn't seem to have broken any of the test rigs in my test-suite, though new specimens for the hall of flakiness are always welcome.
* Fixed many RNA wrapping bugs for Armature data.
- Fixed a few wrong tooltips
- Made proper refreshes for restpose/posed, etc.
* Started converting special quaternion interpolation for Pose Sliding tools (push/relax/breakdown), though this doesn't seem to be working correctly yet.
-->> Help to get these working right is welcome :)
* #19419: PoseLib rename/remove tools could crash when an invalid
(However, now care is needed when touching that index field, since the warnings can keep piling up)
* Added Browse Poses for PoseLib to the toolbar
* Removing constraints from bones now properly updates. A DAG rebuild is now forced, and the constraint flags are cleared.
* Attempting to improve the situation with Copy Rotation constraint and rotation orders other than xyz. Unforunately, it looks like a different method is required...
- use_radius option, off by default for 2.4x files, on by default on new curves.
- curve deform modifiers (think tentacles)
- follow path (parent mode and constraint)
- curve guides
- added back Alt+S to scale point radius
- Mat3Scale and Mat4Scale arithb.c functions to make a new uniform scale matrix.
- TODO, effectors, looks like they have no way to scale from the radius yet.
* Added a new option ('Fixed Position') for Follow Path constraint which allows you to constrain an object/bone to some fixed position along the curve. Unlike the default mode of operation, this doesn't depend on time unless you explicitly animate the offset percentage parameter associated with this.
* Made old (pre 2.5) files saved with armatures in pose mode load in pose mode again.
