In User Preferences, Properties Editor and toolshelf, Ctrl+Tab and Ctrl+Shift+Tab now activates the next or previous space context (or category in case of toolshelf tabs), respectively.
For Properties Editor such functionality was completely missing, only toolshelf allowed cycling using ctrl+mousewheel (or only mousewheel while hovering tab region). Ctrl+Tab and Ctrl+Shift+Tab are common web browser shortcuts, so they're a reasonable choice to go with.
Reaching the first/last item doesn't cause the cycling to stop, we continue at the other end of the list then. (I didn't add this to Ctrl+Mousewheel toggling in toolshelf since I wanted to keep its behavior unchanged.)
We could get rid of (Ctrl+)Mousewheel cycling in toolshelf, but this may break user habits.
The cycling happens using a new operator, UI_OT_space_context_cycle, for toolshelf tabs it's hardcoded in panel handling code though.
Generalized rna_property_enum_step a bit and moved it to rna_access.c to allow external reuse.
Reviewed By: venomgfx
Differential Revision: https://developer.blender.org/D2189
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
This commit brings some long requested improvements to the workflow for setting up
drivers, which should make it easier and faster to set up new drivers in a more
interactive fashion.
The new workflow is as follows:
1) Hover over the property (e.g. "Lamp Energy" or "Y Location") or properties ("Rotation")
you wish to add drivers to. We'll refer to this as the "destination"
2) Ctrl-D to active the new "Add Drivers" eyedropper
3) Click on the property you want to use as the source/target. The property under the
mouse will be used to drive the property you invoked Ctrl-D on.
For example, to drive the X, Y, and Z location of the Cube using the Y Location of the Lamp,
hover over any of the X/Y/Z location buttons, hit Ctrl-D, then click on the Y-Location
button of the Lamp object. Drivers will be added to the X, Y, and Z Location properties
of the Cube; each driver will have a single variable, which uses the Y-Location Transform
Channel of the Lamp.
Tips:
- Transform properties will automatically create "Transform Channel" driver variables.
Everything else will use "Single Property" ones
- Due to the way that Blender's UI Context works, you'll need two Properties Panel instances
open (and to have pinned one of the two to show the properties for the unselected
object). It's slightly clunky, but necessary for implementing a workflow like this,
as the UI cannot be manipulated while using eyedroppers to pick data.
- The eyedropper operator implemented here actually has three modes of operation.
1) The "1-N" (one to many) mode is the default used for Ctrl-D, and "Add Driver to All"
in the RMB Menu. This is the behaviour described above.
2) There's also a "1-1" (one to one) mode that is used for the "Add Single Driver" in the
RMB Menu.
3) Finally, there's the "N-N" mode (many to many), which isn't currently exposed.
The point of this is to allow mapping XYZ to XYZ elementwise (i.e. direct copying)
which is useful for things like locations, rotations, scaling, and colours.
Implementation Notes:
- The bulk of the driver adding logic is in editors/animation/drivers.c, where most of
the Driver UI operators and tools are defined
- The property eyedropper code is in interface_eyedropper.c along with all the other
eyedroppers (even though they don't share much actual code in common). However, this
turns out to be necessary, as we can't get access to many of the low-level buttons API's
otherwise.
Todo:
- It may be necessary to restore a way to access the old behaviour (i.e. "manual setup")
in case it is not practical to immediately pick a property.
- Other things to investigate here include extra hotkeys (e.g. Ctrl-Shift-D for Add Single?),
and to expose the N-N mode.
- Other things we could try include interactively applying scaling factors, picking
multiple targets (e.g. for location difference and rotation difference drivers),
and/or other ways of using these property picking methods.
Needed to allow modal UI keymaps, but I'm sure we'll need this more often in future.
First item will be modal eyedropper keymap coming in a following commit.
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
Currently this is mainly useful for picking camera DOF depth.
- EKey over a distance field prompts you to pick a depth from the camera.
- WKey (Specials menu) to pick from the 3D view (when the active camera's selected).
Make the UI API more consistent and reduce confusion with some naming.
mainly:
- API function calls
- enum values
some internal static functions have been left for now
The issue was that some properties are no direct children of the struct we support in 'copy to selected'
(RNA_Sequence in this case). Since we can't use the ID of sequences here (it's the scene, while we need
a sequence level of control), we had to add a new API helper to RNA path, which takes a RNA type
and return a path relative to the closest ancester of that type.
This way, we get a path from the RNA_Sequence, and can easily apply it to all other valid sequences
to copy the property.
Review, suggestions and edits by Campbell Barton, thanks!
Yep, at last it's here!
There are a few minor issues remaining but development can go on in
master after discussion at blender institute.
For full list of features see:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Painting
Thanks to Sergey and Campbell for the extensive review and to the
countless artists that have given their input and reported issues during
development.
When setting keymap properties to values equalling the RNA default, they will
get "unset" and automatic operator behavior is used. There is no way to
explicitly set the default value as a user.
1) To allow distinguishing uninitialized (not set) properties in the keymap
items, a few changes to the RNA struct comparison function are needed: Instead
of allowing only strict/non-strict comparison of 2 properties A and B in a
struct, this now has 3 modes:
* STRICT: compare only the actual property values (same as 'strict' before)
* UNSET_MATCH_ANY: if either A or B is unset, consider them a match (same as
non-strict before)
* UNSET_MATCH_NONE: if one property is set and the other not, consider them a
mismatch.
The new UNSET_MATCH_NONE mode is useful for keymaps, because it allows keeping
user-defined property values in the keymap even if they match the default
property value (see wm_keymap_diff function in wm_keymap.c)
2) A new operator is added for unsetting ID properties in the RMB context menu
and in user preferences next to keymap properties. This only works on ID
properties and deletes the ID property storage, so that the default value is used.
In the user preferences for keymaps the properties are shown in an inactive
layout to indicate that the default value is used (which some operators such as
the "select linked" op from the report use to trigger automatic behavior). When
the user sets a property it gets set and stays that way until explicitly "unset"
using the new operator.
