Careless use of acos() in spherical coordinates transformation was
deteriorating the precision near zenith (and nadir) and producing
glitchy pixels (best seen in longer focal lengths).
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8266
I'm not sure if the Sky was deliberately left out or was just waiting for a
better moment, but so many I was disappointed that Sky in EEVEE is
completely white.
There are already 2 implementations (osl and gpu) so this is the third one.
Looking at other cases it seems that we are not supposed to share sources
between cycles and the rest? So the new util_sky_model files are just
copies of what is already in cycles, except that the data file uses the RGB
variant of the Hosek/Wilkie model, because we output RGB anyway (but can be
easily changed to XYZ if desired - the results are nearly identical).
I am not sure if it is okay to pass 3*9 float values as 3 mat4 uniforms (I
wanted to use mat3 but it does not work).
Also, should I cache the sky model data between renders if the parameters
do not change?
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D7108
This was due to a bad driver which was not respecting this bit of the
specification:
`If the current primitive does not originate from an instanced draw command, the value of gl_InstanceID is zero.`
When the film is set to transparent the environment pass should still be
rendered solid. otherwise it renders black.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8046
This means all the antiailasing is done inside the fragment shader.
We use a Signed Distance Field to draw the 2D rounded boxes. This ensure
the best quality for AA.
This reduce the averge Batch for widget to 16 verts instead of ~600 and
reduce overshading a lot.
Theme Emboss alpha and tria alpha needs to be changed after this refactor.
The shadow drawing is left unchanged and still use geometry.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D7833
This use the latest GPUTexture change to use the sampler state to avoid
the pole issues instead of using GLSL hacks.
This should fix T73942: Eevee mipmaps not respecting border mode.
Note that this also fix some discrepencies between cycles and eevee (like
boxmapping + clip).
These are the modifications:
-With DRW modification we reduce the number of passes we need to populate.
-Rename passes for consistent naming.
-Reduce complexity in code compilation
-Cleanup how renderpass accumulation passes are setup, using pass instances.
-Make sculpt mode compatible with shadows
-Make hair passes compatible with SSS
-Error shader and lookdev materials now use standalone materials.
-Support default shader (world and material) using a default nodetree internally.
-Change BLEND_CLIP to be emulated by gpu nodetree. Making less shader variations.
-Use BLI_memblock for cache memory allocation.
-Renderpasses are handled by switching a UBO ref bind.
One major hack in this patch is the use of modified pointer as ghash keys.
This rely on the assumption that the keys will never overlap because the
number of options per key will never be bigger than the pointed struct.
The use of one single nodetree to support default material is also a bit hacky
since it won't support concurent usage of this nodetree.
(see EEVEE_shader_default_surface_nodetree)
Another change is that objects with shader errors now appear solid magenta instead
of shaded magenta. This is only because of code reuse purpose but could be changed
if really needed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7642
This new shader is able to emulate smooth wide lines drawing using a
geometry shader.
This shader needs viewportSize and lineWidth uniforms to be set.
There is multiple variants to replace the usage of wide lines for most
shaders.
This patch only fix the gizmo_types files and the navigation gizmo.
Other areas could be fixed afterward, I just limited the patch size.
Fix T57570.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D7487
This solution involves adding a uniform to each fragment shader that is
used by gizmo drawing and use the framebuffer state to set this uniform
accordingly.
This solution can also be carried to external shaders (addons).
A single line of code would then be enough to fix the issue.
The only trickery here is the dummy define:
`#define srgb_to_framebuffer_space(a)`
This is in order to avoid breaking other DRW shaders that use the same
fragment shader code but do not need the tranformation.
Related to T74139
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D7261
Currently in fractal_noise functions, each subsequent octave doubles the
frequency and reduces the amplitude by half. This patch introduces Roughness
input to Noise and Wave nodes. This multiplier determines how quickly the
amplitudes of the subsequent octaves decrease.
Value of 0.5 will be the default, generating identical noise we had before.
Values above 0.5 will increase influence of each octave resulting in more
"rough" noise, most interesting pattern changes happen there. Values below
0.5 will result in more "smooth" noise.
Differential Revision: https://developer.blender.org/D7065
Stereoscopic viewport didn't support Color Manangement due recent
changes in the color management pipeline. In order to solve the issue we
will migrate the strereo rendering into the GPUViewport. This will share
some textures and reduce required GPU memory.
Reviewed By: fclem, dfelinto
Differential Revision: https://developer.blender.org/D6922
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
This patch is (almost) a complete rewrite of workbench engine.
The features remain unchanged but the code quality is greatly improved.
Hair shading is brighter but also more correct.
This also introduce the concept of `DRWShaderLibrary` to make a simple
include system inside the GLSL files.
Differential Revision: https://developer.blender.org/D7060
This has no user visible impact yet since smoke volumes only support a fixed
set of attributes, but will become important with the new volume object.
For GPU shader compilation, volume grids are now handled separately from
image textures. They are somewhere between a vertex attribute and an image
texture, basically an attribute that is stored as a texture.
Differential Revision: https://developer.blender.org/D6952
This is more in line with standard grids and means we don't have to make
many special exceptions in the upcoming change for arbitrary number of volume
grids support in Eevee.
The workbench shader was also changed to fix bugs where squared density was
used, and the smoke color would affect the density so that black smoke would
be invisible. This can change the look of smoke in workbench significantly.
When using the color grid when smoke has a constant color, the color grid
will no longer be premultiplied by the density. If the color is constant
we want to be able not to store a grid at all. This breaks one test for
Cycles and Eevee, but the setup in that test using a color without density
does not make sense. It suffers from artifacts since the unpremultiplied
color grid by itself will not have smooth boundaries.
Differential Revision: https://developer.blender.org/D6951
The current code allocates and transfers a lot of memory to the GPU,
but only a small portion of this memory is actually used.
In addition, the code calls many costly gl operations during the
caching process.
This commit significantly reduce the amount of memory by allocating
and transferring a flat array without pads to the GPU.
It also calls as little as possible the gl operations during the cache.
This code also simulate a billinear filter `GL_LINEAR` using a 1D texture.
**Average drawing time:**
|before:|0.00003184 sec
|now:|0.00001943 sec
|fac:|1.6385156675048407
**5 worst times:**
|before:|[0.001075, 0.001433, 0.002143, 0.002915, 0.003242]
|now:|[0.00094, 0.000993, 0.001502, 0.002284, 0.002328]
Differential Revision: https://developer.blender.org/D6886
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
This patch provides an optimisation for Ease (Smoothstep) setting in the color ramp node.
This optimisation exists already for Constant and Linear modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6880
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
Apparently the compiled shader bump into some register limit and
the compiler instead of giving an error, does something incorrectly.
Differential Revision: https://developer.blender.org/D6759
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
The ratio for area stretching was packed into an unsigned int, but could
contain negative numbers. This flipped the negative numbers to high
positive numbers and rendered the wrong color in the stretching overlay.
I can remember during {T63755} I had to flip the sign to get the
correct result, but couldn't find out why that was needed. Now I know.
Reviewed By: fclem, mano-wii
Differential Revision: https://developer.blender.org/D6440
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
