The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
BLI should always comes first, before DNA, BKE etc. And
`BLI_utildefines.h` should come before any other BLI (since it's some
sort of system include really, among other things...).
Thisi should help to reduce the noise in patches when adding stuff
like uint64_t members to DNA structs... ;)
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
The contents of the ModifierEvalContext struct are constant while iterating
over the modifier stack. The struct thus should be only created once, outside
any loop over the modifiers.
Makes the follow changes:
- Add new `deform*` and `apply*` function pointers to `ModifierTypeInfo` that take `Mesh`, and rename the old functions to indicate that they take `DerivedMesh`. These new functions are currently set to `NULL` for all modifiers.
- Add wrapper `modifier_deform*` and `modifier_apply*` functions in two variants: one that works with `Mesh` and the other which works with `DerivedMesh` that is named with `*_DM_depercated`. These functions check which type of data the modifier supports and converts if necessary
- Update the rest of Blender to be aware and make use of these new functions
The goal of these changes is to make it possible to port to using `Mesh` incrementally without ever needing to enter into a state where modifiers don't work. After everything has been ported over the old functions and wrappers could be removed.
Reviewers: campbellbarton, sergey, mont29
Subscribers: sybren
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D3155
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
2.8x branch added bContext arg in many places,
pass eval-context instead since its not simple to reason about what
what nested functions do when they can access and change almost anything.
Also use const to prevent unexpected modifications.
This fixes crash loading files with shadows,
since off-screen buffers use a NULL context for rendering.
Own previous fix (rBd5d626df236b) was not valid, curves are actually
supported by SoftBodies. It was rather a mere UI bug, which was not
including Surfaces and Font obect types in those valid for softbody UI.
Thanks to @brecht for the head up!
Also, fix safe for 2.79, btw.
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
This commit effectively makes workspace switching useless as far as the
active scene layer goes.
The functions from the scene layer API to get the correct scene layer
from "context" were a placeholder to be addressed by the workspace
commit.
When workspace was merged, however G.main was used as a replacement to pass the
correct argument for the functions. As it turned out (surprise!) this
leads to crash on render preview.
We need to get rid of:
* BKE_scene_layer_context_active_ex_PLACEHOLDER
* BKE_scene_layer_context_active_PLACEHOLDER
And either use SceneLayer explicitly or replace it by:
* BKE_scene_layer_from_workspace_get
These bits became obsolete with the new layer system, so we can
simplify some code around them or avoid existing workarounds which
were trying to keep things working for them.
There are still work needed to be done for on_visible_change to
avoid unnecessary updates, but that can also happen later.
Current implementation more or less indiscriminately links physics
objects to colliders and forces, ignoring precise details of layer
checks and collider groups. The new depsgraph seemed to lack some
such links at all. The relevant code in modifiers suffers from a
lot of duplication.
Different physics simulations use independent implementations of
collision and similar things, which results in a lot of variance:
* Cloth collides with objects on same or visible layer with dupli.
* Softbody collides with objects on same layer without dupli.
* Non-hair particles collide on same layer with dupli.
* Smoke uses same code as cloth, but needs different modifier.
* Dynamic paint "collides" with brushes on any layer without dupli.
Force fields with absorption also imply dependency on colliders:
* For most systems, colliders are selected from same layer as field.
* For non-hair particles, it uses the same exact set as the particles.
As a special quirk, smoke ignores smoke flow force fields; on the other
hand dependency on such field implies dependency on the smoke domain.
This introduces two utility functions each for old and new depsgraph
that are flexible enough to handle all these variations, and uses them
to handle particles, cloth, smoke, softbody and dynpaint.
One thing to watch out for is that depsgraph code shouldn't rely on
any properties that don't cause a graph rebuild when changed. This
was violated in the original code that was building force field links,
while taking zero field weights into account.
This change may cause new dependency cycles in cases where necessary
dependencies were missing, but may also remove cycles in situations
where unnecessary links were previously created. It's also now possible
to solve some cycles by switching to explicit groups, since they are
now properly taken into account for dependencies.
Differential Revision: https://developer.blender.org/D2141
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
Used a crazyspace approach (like in edit mode), but only modifiers with
deformMatricies are allowed atm (currently shapekeys and armature modifiers only).
All the rest modifiers had an warning message that they aren't applied because
of sculpt mode. Deformation of multires is also unsupported.
With all this restictions users will always see the actual "layer" (or maybe
mesh state would be more correct word) they are sculpting on.
Internal changes:
- All modifiers could have deformMatricies callback (the same as deformMatriciesEM but
for non-edit mode usage)
- Added function to build crazyspace for sculpting (sculpt_get_deform_matrices), but it
could be generalized for usage in other painting modes (particle edit mode, i.e)
Todo:
- Implement crazyspace correction to support all kinds of deformation modifiers
- Maybe deformation of multires isn't so difficult?
- And maybe we could avoid extra bad-level-stub for ED_sculpt_modifiers_changed
without code duplicating?
When there are 2+ consecutive deform modifiers, the second modifier was getting incorrect normals, this only showed up for the displace modifier since its the only deform modifier that uses vertex normals.
It would have been easy to fix this by always calculating normals on deform modifiers, but slow.
To fix this I added a function to check if a deform modifier needs normals, so the normal calculation function only runs if there are 2 modifiers in a row and the second uses normals.
