The flag was only used in readfile.c, and resulted in a delayed call to
BKE_ocean_add(); this call is now immediately made instead as it's not
very expensive.
It is hidden behind the --debug-io flag for now.
Idea is to try to catch broken libraries state in current Main before we
actually write the file on disk, should help catching and understanding
what happens in Spring corruption cases.
Issue was, *some* IDs (like infamous nodetrees from materials etc.)
would not go through the 'main' read_libblock() func, so their tags were
never reset.
So now, we ensure direct_link_id() always clear the tags, and move
setting them in read_libblock() after the call to direct_link_id().
Needed for depsgraph, but general healthier fix actually.
This is a part of copy-on-write sanitization, to avoid all the checks
which were attempting to keep sub-data pointers intact.
Point is: ID pointers never change for CoW datablocks, but nested
data pointers might change when updating existing copy.
Solution: Only bind ID data pointers and index of sub-data.
This will make CoW datablock 7update function was easier in 2.8.
In master we were only using pose channel pointers in callbacks,
this is exactly what this commit addresses. A linear lookup array
is created on pose evaluation init and is thrown away afterwards.
One thing we might consider doing is to keep indexed array of
poses, similar to chanhash.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Subscribers: dfelinto
Differential Revision: https://developer.blender.org/D3124
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
Need Clear ID recalc flag on load. Otherwise it's possible to have
some IDs considered always updated by Cycles, when they were saved
in a tagged-for-update state.
Thanks Bastien for feedback and review!
Once 'losing lib' issue is fixed (in previous commit), we have new issue
that this could lead to several copies of the same linked data-block in
.blend file. Which is not good. At all.
So had to add a GHash-based check in libraries reading code to ensure we
only load a same ID from a same lib once.
The issue was that when a same lib was found several times in loaded
.blend, we'd only keep the first occurence. But since Blender expects
next data-blocks to belong to last found library, we could actually
be adding data-blocks assigned to copies of the duplicated lib to
another, totally unrelated lib.
Those data-blocks were then obviously not found when actually loading
libs content, and lost.
Note that this only fix one part of the issue, current code can
generate several copies of same linked data-block now, will fix in
another commit.
It allows to have children hair to be twisted around parent curve, which is
quite an essential feature when creating hair braids.
There are currently two controls:
- Number of turns around parent children.
- Influence curve, which allows to modify "twistness" along the strand.
Move timer and tip out of button code,
now the only requests a tooltip,
passing a creation callback to run.
Needed for manipulators in 2.8,
also helps de-duplicate logic - since we never want
multiple tool-tips showing at once.
Solves these security issues from T52924:
CVE-2017-12102
CVE-2017-12103
CVE-2017-12104
While the specific overflow issue may be fixed, loading the repro .blend
files may still crash because they are incomplete and corrupt. The way
they crash may be impossible to exploit, but this is difficult to prove.
Differential Revision: https://developer.blender.org/D3002
Solves these security issues from T52924:
CVE-2017-12081
CVE-2017-12082
CVE-2017-12086
CVE-2017-12099
CVE-2017-12100
CVE-2017-12101
CVE-2017-12105
While the specific overflow issue may be fixed, loading the repro .blend
files may still crash because they are incomplete and corrupt. The way
they crash may be impossible to exploit, but this is difficult to prove.
Differential Revision: https://developer.blender.org/D3002
Currently this is a no-visible-changes change, but the idea is to use this
dedicated flag to tell which exact components of ID changed, make it more
granular than just OBJECT and OBJECT_DATA. Allow setting this field based
on what components new dependency graph flushed on evaluation.
This is a part of ongoing work in Blender 2.8, where we need to replace
`object->id.tag & LIB_TAG_ID_RECALC_DATA`
with
`object->data->id.tag & LIB_TAG_ID_RECALC`
Should be no user measurable difference.
Avoid creating new Python instances
every time a scene, object, mesh .. etc are accessed.
Also resolves crashes T28724, T53530
although it's only valid for ID types, not modifiers vertices etc.
Back-ported from blender2.8 branch.
One or two are OK, but more make it rather unreadable, and future work
is likely to require more toggle specific behavior here. So switched to
bitflags, switching from short to int and using 16 upper bits for
'internal' ones defined in BLO_readfile.h, combined with 'public' ones
from user interaction, defined in DNA_space_types.h
Cyclic extrapolation is implemented as an f-curve modifier, so this
technically violates abstraction separation and is something of a hack.
However without such behavior achieving smooth looping with cyclic
extrapolation is extremely cumbersome.
The new behavior is applied when the first modifier is Cyclic
extrapolation in Repeat or Repeat with Offset mode without
using influence, repeat count or range restrictions.
This change in behavior means that curve handles have to be updated
when the modifier is added, removed or its options change. Due to the
way code is structured, it seems it requires a helper link to the
containing curve from the modifier object.
Reviewers: aligorith
Differential Revision: https://developer.blender.org/D2783
2016 GSOC project by @nathanvollmer, see D2150
- Mirrored painting and radial symmetry, like in sculpt mode.
- Volume based splash prevention,
which avoids painting vertices far away from the 3D brush location.
- Normal based splash prevention,
which avoids painting vertices with normals opposite the normal
at the 3D brush location.
- Blur mode now uses a nearest neighbor average.
- Average mode, which averages the color/weight
of the vertices within the brush
- Smudge mode, which pulls the colors/weights
along the direction of the brush
- RGB^2 color blending, which gives a more accurate
blend between two colors
- multithreading support. (PBVH leaves are painted in parallel.)
- Foreground/background color picker in vertex paint
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
Previously it was returning short, which was really easy to (a) compare against
non-ID type value (b) forget to handle some specific value in switch statement.
Both issues happened in the nearest past, so it's time to tighten some nuts
here.
Most of the change related on silencing strict compiler warning now, but there
is also one tricky aspect: ID_NLA is not in the IDType enum. So there is still
cast to short to handle that switch. If someone has better ideas how to deal
with this please go ahead :)
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
We unfortunately cannot fix this for previous versions of Blender, but
at least the issue (Blender crashing on unknown IDProp types) should now
be addressed for future.
Simply reset unknown IDProp types to integer one, and reset its value to zero.
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
