Both the scene and workspace had an active view layer, and it was confusing
which settings were being used or displayed where. Now we always have one,
so there is no mismatch.
The "View Layers" tab in the properties editor is now "View Layer", no longer
showing a list of layers. Instead view layers can be added and removed with
the workspace view layer selector. They are also listed and selectable in the
outliner.
Single layer rendering uses the active view layer from the workspace.
This fixes bugs where the wrong active view layer was used, but more places
remain that are wrong and are now using the first view layer in the scene.
These are all marked with BKE_view_layer_context_active_PLACEHOLDER.
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
For correct results these must have been set already when the depsgraph was
created and evaluated, so all dependencies have appropriate resolutions too.
For particle we no longer backup and restore the viewport particles to avoid
overwriting them during render, as copy-on-write solves this for us. Even
without COW particles seem to work ok.
This also removes the particle simplification options based on camera. This
was never used much and only available in Blender Internal.
Differential Revision: https://developer.blender.org/D3148
Scene, view layer and mode are now set in the constructor and never changed.
Time is updated on frame changes to indicate which frame is being or has been
evaluated last.
This is a step towards making EvaluationContext obsolete.
Differential Revision: https://developer.blender.org/D3144
User notes
----------
Compositing, rendering of multi-layers in Eevee should be fully working now.
Development notes
-----------------
Up until now we were still using the same depsgraph for rendering and viewport
evaluation. And we had to go out of our ways to be sure the depsgraphs were
updated.
Now we iterate over the (to be rendered) view layers and create a depsgraph to
each one, fully evaluated and call the render engines (Cycles, Eevee, ...) with
this viewlayer/depsgraph/evaluation context.
At this time we are not handling data persistency, Depsgraph is created from
scratch prior to rendering each frame. So I got rid of most of the partial
update calls we had during the render pipeline.
Cycles: Brecht Van Lommel did a patch to tackle some of the required Cycles
changes but this commit mark these changes as TODOs. Basically Cycles needs to
render one layer at a time.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3073
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
The issue was caused by render result identifier only consist of scene name,
which could indeed cause conflicts.
On the one hand, there are quite some areas in Blender where we need identifier
to be unique to properly address things. Usually this is required for sub-data
of IDs, like bones. On another hand, it's not that hard to support this
particular case and avoid possible frustration.
The idea is, we add library name to render identifier for linked scenes. We use
library name and not pointer so we preserve render results through undo stack.
Reviewers: campbellbarton, mont29, brecht
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2836
We have a hardcored limit of 1000 images to be baked.
However anything anove 100 would be leading to overflow in the code.
Caught by warning from builder bot (my compiler doesn't even complain
about this, but it should).
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
If users wanted to bake only a few of the mesh materials, they would
still need to create dummy textures for the other parts.
This commit report (as RPT_INFO) the materials with no texture, but move
on to bake the others materials.
Basically upon invoking cycles baking we could canell it which would
leave G.is_break hanging as true. Since we were not setting is_break to
false before exec baking, it would misbehave.
New logic of split_faces was leaving mesh in a proper state
from Blender's point of view, but Cycles wanted loop normals
to be "flushed" to vertex normals.
Now we do such a flush from Cycles side again, so we don't
leave bad meshes behind.
Thanks Bastien for assistance here!
BKE_main_id_tag_/BKE_main_id_flag_ were horrible naming now that we split those
into flags (for presistent one) and tags (for runtime ones).
Got rid of previous 'tag_' functions behavior (those who were dedicated shortcuts
to set/clear LIB_TAG_DOIT), so now '_tag_' functions affect tags, and '_flag_'
functions affect flags.
The combined pass is built with the contributions the user finds fit.
It is useful for lightmap baking, as well as non-view dependent effects
baking.
The manual will be updated once we get closer to the 2.77 release.
Meanwhile the new page can be found here:
http://dalaifelinto.com/blender-manual/render/cycles/baking.html
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D1674
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
Combine all the highpoly pixel arrays into a single array with a lookup
object_id for each of the highpoly objects.
Note: This changes the Bake API, external engines should refer to the
bake_api.c for the latest API.
Many thanks for Sergey Sharybin for the complete review, changes
suggestion and feedback. (you rock!)
Reviewers: sergey
Subscribers: pildanovak, marcclintdion, monio, metalliandy, brecht
Maniphest Tasks: T41092
Differential Revision: https://developer.blender.org/D772
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
Added an utility function which performs vertex split based on the loop
normal so now backing API matches to what's happening in Cycles and BI
in terms of autosplit.
Reviewers: dfelinto, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1174
