This patch fixes a visual bug related to connecting an output socket to
a Multi-Input Socket, that already has a link to that same output.
In this case, the drag link got a new index and snapped to a new
position. This path makes the drag link snap to the same position as the
first link between the two sockets.
Differential Revision: https://developer.blender.org/D10689
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
Steps to reproduce were:
* Open an Asset Browser
* "Mark Asset" on some data-block
* Change the Asset Browser into a different editor (not File Browser!)
* "Clear Asset" on the data-block again, or mark another asset
* Change back to the Asset Browser, it will show an outdated list
Now the file-browser reloads local file data after spaces were changed. Note
that the current notifier code doesn't limit the space-change notifiers to the
affected spaces, so changing any visible space will trigger this. That's an
issue to be fixed separately.
Rather than letting the `TreeElementAnimData` constructor take an ID from which
we get the animation-data based on an assumption on how it's stored, let the
constructor take the animation-data directly. That way we further centralize
the assumptions on the data passed to the element creation to
`tree_element_create()`.
The following commit will add a comment explaining the plan to entirely get rid
of those assumptions in the future.
There was an implicit assumption that tree element types using the new code
design set their name on creation. Use an assert to make this explicit. See
f59ff9e03a, which was an error because of this broken assumption.
Caused by 2e221de4ce in combination with 4292bb060d.
In the former I forgot to set the name for NLA actions in the new code design,
in the latter I made it an assumtion that tree element types using the new
design set the name.
The following commit will make this assumption explicit with an assert.
When loading a file with an asset browser open, and it showed a custom asset
library that can't be found currently (e.g. because the file is from somebody
else), the `BLI_assert(0)` in `rna_FileAssetSelectParams_asset_library_get()`
would fail.
There was code to handle this case already, but unlike I thought it didn't run
right after file read. Now it does.
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
It was possible to create recursive nodetrees when choosing the 'root'
nodegroup in the node link menu though leading to a crash.
Now poll if a group node of a particular node could actually be added to
the current tree.
Also check if the tree types actually match.
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10671
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Properties Editor
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
rB85421c4fab02 added an attribute search button, but this was missing
still (gave just the regular text button) if this was displayed in the
Properties Editor.
ref b279fef85d / T86416 / D10671 / D10673
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10674
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
Splits up `tree_element_id.cc`/`tree_element_id.hh`.
If we move all ID types into this one file, it will become rather big. Smaller
files are probably easier to work with. We could still keep small classes like
`TreeElementIDLibrary` in the general file, don't mind really, but this creates
separate files for that too.
These files can contain more than just the "base" tree element types. E.g. the
class for the view-layer base element can also contain the class for the
view-layer elements. Otherwise we'd end up with like >50 files for the
individual types, most of them very small.
So just give the files a general name and put the related classes in there.
Continuation of work in 2e221de4ce, 249e4df110 and 3a907e7425.
Adds new tree-element classes for the scene-ID, scene collections, scene
objects, and the view layers base.
There is some more temporary stuff in here, which can be removed once we're
further along with the porting. Noted that in comments.
This was reported as opening alembic caches ignoring the
'use_relative_paths' preference, but this operator just did not have
this setting. Fortunately, adding this is just a simple switch.
Maniphest Tasks: T86063
Differential Revision: https://developer.blender.org/D10568
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The Tool stores desired dimensions as `scale` and thus had to half the
scale again in `make_prim_init()` because by default all primitives are
created at a size of 2 in blender.
This worked, but:
- [1] it logged something like size=2, scale=2,2,2 for a 2x2x2 cube
[which does not sound right, it should be size=2 scale=1,1,1]
- [2] it had to make an exception for the case scale is exactly 1x1x1
[this happens when the property is not set specifically, e.g. adding
primitives from the menu]
-- this exception led to double sized primitives being created when the
tool asked for exact dimensions of 1x1x1
Now - instead of compensating in `make_prim_init()` - do this earlier in
the tool itself, see `view3d_interactive_add_modal`, this fixes the bug
and now also correctly logs size=2 scale 0.5,0.5,0.5 for a 1x1x1 cube.
Maniphest Tasks: T86347
Differential Revision: https://developer.blender.org/D10632
The handle of a drawing callback can be removed within the drawing function itself.
This causes `var = (type)(((Link *)(var))->next` to read an invalid memory value in C.
It looks like we never generated correct icon previews for images with
float_rects (non-8bit-images). Images from the report were 16bit pngs.
In this case, `icon_preview_startjob` would return early (it only
checked if the ImBuf `rect` was NULL -- which is the case if it has a
`rect_float` instead). This is not neccessary since `icon_copy_rect` is
perfectly capable of taking float rects.
Now correct the check and only return early if both `rect` & `rect_float`
are NULL.
note: this will not refresh icon previews from existing files
automatically. For this, use File > Data Previews > Clear Data-Block
Previews.
Maniphest Tasks: T86210
Differential Revision: https://developer.blender.org/D10601
Caused by {rB85421c4fab02}.
Above commit treated `SOCK_RGBA` and `SOCK_STRING` the same in
`std_node_socket_draw`.
That would turn a RGBA button into a text button (for attribute search),
leading to trouble.
Note these were just treated the same prior to above commit because both
were doing the layout split.
Now just give RGBA sockets their own case.
Maniphest Tasks: T86373
Differential Revision: https://developer.blender.org/D10646
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
Because the search didn't run when the menu first opens, the attributes
appeared in a different order than after you typed anything into the
search field. This commit instead runs the search when the menu
is first opened, but it only sorts items without filtering.
Continuation of work in 2e221de4ce and 249e4df110 .
This prepares things so we can start porting the individual ID types to
the new code design. I already added some code for library IDs, because
they need some special handling during construction, which I didn't want
to break.
The `AbstractTreeElement::isExpandValid()` check can be removed once
types were ported and can be assumed to have a proper `expand()`
implemenation.
Also makes `TreeElementGPencilLayer` `final` which I forgot in
e0442a955b.
Mistake in aa3a4973a3. The expanded `ELEM()` check would include
`0 && te->idcode != 0`, which always evaluates to `false`/`0`. That
wouldn't cause the asset to fail, but the `te->idcode` part would never
be checked.
Fixed the error and cleaned up the check against "0" with a check
against `TSE_SOME_ID`, see b9e54566e3.
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
Continuation of work in 2e221de4ce and 249e4df110. Now the tree-element
types have to be ported one by one. This is probably the most straight forward
type to port.
