ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This patch moves all the functionality previously in SceneRenderLayer to SceneLayer.
If we want to rename some of these structs now would be a good time to do it, before they are in SceneLayer.
Everything should be working, though I will test things further tomorrow. Once this is committed depsgraph can get
rid of the workaround added in rna_Main_meshes_new_from_object and finish whatever this patch was preventing from being finished.
This patch also adds a few placeholders for the overrides (samples, ...). These are obviously not working, so some unittests that rely on 'lay', and 'zmask' will fail.
This patch does not addressed the change of moving samples to ViewRender (I have this as a separate patch and needs some separate discussion).
Following next is the individual note of the individual parts that were committed.
Note 1: It is up to Cycles to still get rid of exclude_layer internally.
Note 2: Cycles still need to handle its own doversion for the use_layer_samples cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
Note 3: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
Note 4: There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead of taking things from it bit by bit.
Reviewers: sergey, campbellbarton, brecht
Differential Revision: https://developer.blender.org/D2919
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
As part of the fix for T51587, I removed the Depth output for non-Multilayer
images since it seemed weird that PNGs etc. that don't have a Z pass still get
a socket for it.
However, I forgot about non-multilayer EXRs, which are a special case that can
actually have a Z pass.
Therefore, this commit brings back the Depth output for non-multilayer images
just like it was in 2.78.
Although the original report was about the docs, the real issue was in
the API.
My original commit started from a copy-paste from the Switch
Node. However I don't use custom1 for thew Switch View node.
The docs is slightly incomplete since it would be nice to mention the
views here. Or maybe even expose them via Python. But honestly they are
generated depending on the scene multi-view settings.
Brightness/contrast node was changing color but did not modify alpha
or ensured colors are premultiplied on the output. This was giving
artifacts later on unless alpha was manually converted.
Compositor is supposed to work in premultiplied alpha (except of
some really corner cases) so it makes sense to ensure premultiplied
alpha after brightness/contrast node.
This is now done as an option enabled by default, so we:
(a) Keep compatibility with old files.
(b) Have correct behavior for newly created files.
Later on we can get rid of this option.
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
Please never, ever use same DNA var for two different things. Even worse
if they do not have same type and ranges!
This is only ensuring issues (as described in report, but also if
animating both RNA props using same DNA var... yuck).
And we were not even saving any byte in DNA, could reuse some padding
there to store the two new needed vars (yes, two, since we cannot re-use
existing one if we want to keep backward *and* forward compatibility).
This is much more flexible solution which will allow doing some
more procedural features.
Reviewers: brecht, dfelinto, mont29
Reviewed By: mont29
Subscribers: Severin
Differential Revision: https://developer.blender.org/D2403
Things like `BLI_uniquename` had nothing, but really nothing to do in
BLI_path_util files!
Also, got rid of length limitation in `BLI_uniquename_cb`, we can use
alloca here to avoid overhead of malloc while keeping free size (within
reasonable limits of course).
Based on an user feedback, previous implementation with providing
decoupled X and Y speeds didn't work in production at all: there
is no way to combine this speeds to an usable vector.
So now we're providing speed vector output instead, which provides
speed in an exactly the way Vector Blur node expects it to be:
first two components is a speed from the past, second two components
defines speed to the future.
Old behavior can be achieved by RGBA separating the speed output
and using first tow components.
Now this speed gives quite the same results as a speed pass, with
the only difference that track position speed uses "shutter" of
1 while pass uses shutter of 0.5 (and there's no way to affect on
that?).
velocity is measured in pixels per frame. It is basically a coordinate
difference of track coordinate at current frame and previous one (no future
prediction happens).
It's not really most intuitive place for such a things, but historically the
node was called this way..
Track velocity could be used to face effects like motion blur bu piping it
to the vector blur node.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Subscribers: hype, sebastian_k
Differential Revision: https://developer.blender.org/D1591
Nodes have a feature for moving existing links to unoccupied sockets when connecting
to an already used input. This is based on the standard legacy socket types (value/float,
vector, color/rgba) and works reasonably well for shader, compositor and texture nodes.
For new pynode systems, however, the hardcoded nature of that feature has major drawbacks:
* It does not take different type systems into account, leading to meaningless connections
when sockets are swapped and making the feature useless or outright debilitating.
* Advanced socket behaviors would be possible with a registerable callback, e.g. creating
extensible input lists that move existing connections down to make room for a new link.
Now any handling of new links is done via the 'insert_links' callback, which can also be
registered through the RNA API. For the legacy shader/compo/tex nodes the behavior is the
same, using a C callback.
Note on the 'use_swap' flag: this has been removed because it was meaningless anyway:
It was disabled only for the insert-node-on-link feature, which works only for
completely unconnected nodes anyway, so there would be nothing to swap in the first place.
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
This commit fixes issues with wrong socket type being added to the Cycles debug
pass compositor operation, which lead to crashes with non-value pass types.
This commit also reverts socket renaming thing because while it's was behaving
ok on runtime file reload might have loose the links which is annoying.
Currently only works correct with single float output, RGBA and vector are not
supported so if one need to use this passes he'll need to wait a bit still.
It is coming, don't worry.
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
This way re-mapping scene nodes to EXR files becomes much easier,
no extra trickery with separate RGBA setups is needed.
Plus makes it more consistent with regular EXR files.
This uses EGBA pass to get alpha from.
Quite striaghtforward change, and in theory we can even try supporting motion
blur for the corner pin node (which is tricky because coordinates actually
coming from sockets, but with some black magic should be doable).
This allows adding a "fake" sun beam effect, simulating crepuscular rays
from light being scattered in a medium like the atmosphere or deep water.
Such effects can be created also by renderers using volumetric lighting,
but the compositor feature is a lot cheaper and is independent from 3D
rendering. This makes it ideally suited for motion graphics.
The implementation uses am optimized accumulation method for gathering
color values along a line segment. The inner buffer loop uses fixed
offset increments to avoid unnecessary multiplications and avoids
variables by using compile-time specialization (see inline comments
for further details).
trees for localization (previews and viewer evaluation).
This is handled entirely by the compositor already. Doing this during
localization is redundant and risks divergent behavior.
