Our RenderSettings struct may have a bit too much levels, makes it hard to track
all 'pointer' data during copy...
Fixed several issues here, but not sure I found all existing ones. :/
The combined pass is built with the contributions the user finds fit.
It is useful for lightmap baking, as well as non-view dependent effects
baking.
The manual will be updated once we get closer to the 2.77 release.
Meanwhile the new page can be found here:
http://dalaifelinto.com/blender-manual/render/cycles/baking.html
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D1674
Historically blender had an audio sample rate of 44.1 kHz as default which is mostly popular because it's the sample rate of audio CDs. Audaspace kept using this default from the pre 2.5 era. It was about time to change to 48 kHz, which is a more widespread standard nowadays, especially in video. It is the recommended sampling rate of the Audio Engineering Society.
Further reading: https://en.wikipedia.org/wiki/44,100_Hz#Status
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
This is really similar to what GPU module was already doing. There are number of
possible improvements still:
- Re-use allocated VAOs when requesting new ones instead of going to the trouble
of freeing VAO and then re-creating it again.
- Move VAO handling to GPU module.
Fixes T46589: OpenSubdiv crash with drivers
Crash was happening due to OpenGL free from the non-main thread. Ideally we need
to implement somewhat delayed unused buffer free for OpenSubdiv similar to what we
are doing in GPU module.
Shutter curve now can be controlled using curve mapping widget in the motion
blur panel in Render buttons. Only mapping from 0..1 by x axis are allowed,
Y values will be normalized to fill in 0..1 space as well automatically.
Y values of 0 means fully closed shutter, Y values of 1 means fully opened
shutter.
Default mapping is set to old behavior when shutter opens and closes instantly.
This shutter mapping curve could easily be used by any other render engine by
accessing scene.render.motion_blur_shutter_curve.
Reviewers: #cycles, brecht, juicyfruit, campbellbarton
Differential Revision: https://developer.blender.org/D1585
Idea is, instead of ignoring completely missing linked datablocks, to
create void placeholders for them.
That way, you can work on your file, save it, and find again your missing data once
lib becomes available again. Or you can edit missing lib's path (in Outliner),
save and reload the file, and you are done.
Also, Outliner now shows broken libraries (and placeholders) with a 'broken lib' icon.
Future plans are also to be able to relocate missing libs and reload them at runtime.
Code notes:
- Placeholder ID is just a regular datablock of same type as expected linked one,
with 'default' data, and a LIB_MISSING bitflag set.
- To allow creation of such datablocks, creation of datablocks in BKE was split in two step:
+ Allocation of memory itself.
+ Setting of all internal data to default values.
See also the design task (T43351).
Reviewed by @campbellbarton, thanks a bunch!
Differential Revision: https://developer.blender.org/D1394
Issue was caused by blender internal accessing data from DNA during rendering.
There's no simple solution to make stuff thread safe, so for now simply restart
rendering on frame update.
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
This commit fixes missing updates of masks with the new dependency graph
in a way which is safe for backport into master branch.
Compositor nodes will not receive needed update callback yet, this will
be solved after mask and compositor are becoming a proper node in the
graph, it is considered a TODO now.
This way it is possible to have single threaded depsgraph but threaded other areas
which is handy for torubleshooting.
he argument is: --debug-depsgraph-no-threads
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
This way it is possible to have viewport simplification bumped all the way up,
making viewport really responsive but still have final render to use highest
subdivision possible.
Reviewers: lukastoenne, campbellbarton, dingto
Reviewed By: campbellbarton, dingto
Subscribers: dingto, nutel, eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1273
Allocate statistics array dynamically, so increasing max number of threads does
not increase sloppyness of the memory usage.
For the further cleanups: we can try alloca-ing this array, but it's also not
really safe because we can have quite huge number of threads in the future.
Plus statistics will allocate memory for each individual entry, so using alloca
is not going to give anything beneficial here.
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
This change introduces a new hysteresis parameter that it will be added
or subtracted to/from the LOD distance to avoid popping when a LOD
object moves close to the LOD transition continuously.
Then, we have the following:
- a new LOD Hysteresis setting per scene (default 10%) which is located
in Scene context --> Level of Detail panel. This scene parameter also
will active/deactive the scene hysteresis.
- and a new LOD Hysteresis setting per object (default 10%) which is
located in Object context --> Levels of Detail panel. The LOD hysteresis
setting per object (if active) will overwrite the hysteresis setting per
scene value.
For the new blends: the hysteresis setting per scene would be active by
default and the per object would be inactive by default.
For the old blends: both hysteresis settings (per scene and per object)
would be inactive by default. A quick way to take advantage of this
feature for old blends would be to activate the hysteresis parameter in
the scene context -> Level of Detail panel
Reviewers: campbellbarton, kupoman, moguri
Reviewed By: kupoman, moguri
Subscribers: nonamejuju, lordodin
Differential Revision: https://developer.blender.org/D957
