Note that due to RNA get/setters issue, that one may actually add some
G.main usages to the total... But at least it's not hidden anymore in a
very low-level, dark corner of BKE pointcache code!
This commit adds number formatting (thousands separator) to the baking panel. It also adds a new function to format memory sizes (KB/GB/etc) and applies it to the baking panel and scene stats. The new function is unit tested.
Reviewers: Severin
Tags: #user_interface
Differential Revision: https://developer.blender.org/D1248
This is used to determine which voxels are to be considered empty space.
Previously it was hardcoded for converting dense grids to OpenVDB grids
to reduce disk space usage.
This value is also useful for rendering engines to know, i.e. to
optimize ray marching.
Some other software cannot handle grid names with spaces in them. We still check for names with spaces so as to not break old
files.
This fixes T53802.
Baking rigid body cache was broken if some cached frames already
existed.
This is just a band aid for release, the logic need to be looked into
further.
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This code obviously should also use the cache_fields flag variable,
like the code for reading the lowres data in the same function.
This is because fluid_fields actually represents the old state before
smoke was reallocated to match cache_fields read from the file, and if
it has some fields enabled that aren't allocated any more, it crashes.
This also fixes a reverse glitch: when a file was loaded with
the current frame in the middle of a baked smoke+fire simulation,
smoke appeared immediately, but the fire didn't until the frame
was changed. The reason is the same: after file load no fields
are initially allocated and thus fluid_fields is 0.
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
Commit rB709ca0ece changed how rotation was handled for particles so
that unless actual rotation physics is enabled, there is no rotation.
However it only updated ptcache_particle_read, forgetting to change
exactly the same code in ptcache_particle_interpolate.
This means that for subframes old code that computes a rotation from
velocity is used, resulting in completely different rotation than for
integer frames. This causes rotational motion blur by itself, and also
mangles motion blur paths of child particles.
Reviewers: sergey, lukastoenne
Maniphest Tasks: T45936
Differential Revision: https://developer.blender.org/D2124
The bake system had a 200ms sleep for each frame substep, to give the UI time
to redraw. I don't think there is a good reason to have this, with fair thread
scheduling this will give UI thread 2x more time at best, and the UI doesn't
need to be that responsive during bake.
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
This is how the old code used to initialize it. Current value was
failing big time when baking all caches (always set to MAXFRAME), and it
was added right before commit to quiet a warning... (I know, I know...)
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Note that the collision modifier doesn't have any use for Loop indices,
so to avoid duplicating the loop array too,
MVertTri has been added which simply stores vertex indices (runtime only).
deletion of baked caches.
This happens when objects use file names with matching prefixes:
"CubeX" -> not baked
"CubeXYZ" -> baked
The first objects cache should be discarded up to the current frame on
file load, but the second should be left intact. But because the cache
file names for both use the same prefix as well (based on hex name
representation) they both match the "CubeX" name and get discarded.
Adding the underscore terminator solves this issue, because it is never
part of the hex file name string.
WARNING: this solution does not work with custom names for point caches.
This feature is pretty much broken, users have to ensure their names
are unique themselves. Due to the possibility of underscores in names
and the ambiguity of point cache suffixes there is no reliable way to
encode filenames in that case.
Update lzo library due to security issue
Update lzo to latest version. This fixes a security issue (reported in T41974)
This also fixes some (false-positive) valgrind warnings.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D803
Current temporary data of Blender suffers one major issue - default 'temp' dir on Windows is never
automatically cleaned up, and can end being quite big when used by Blender, especially when we have
to store per-process data (using getpid() in file names).
To address this, this patch:
* Divides tempdir paths in two, one for 'base' temp dir (the same as previous unique tempdir path),
the other is a mkdtemp-generated sub-dir, specific to each Blender instance.
* Only uses base tempdir when we need some shallow persistance accross Blender sessions - and we always
reuse the same filename (quit.blend...) or generate small file (crash reports...).
* Uses temp sub-dir for heavy files like pointcache or renderEXRs (Save Buffer option).
* Erases temp sub-dir on quit or crash.
To get this working it also adds a working 'recursive delete' to BLI_delete() under Windows.
Note that, as in current code, the 'recover render result' hack-feature that was possible
with SaveBuffer option is still removed. A real renderresult cache feature will be added
soon, though.
Reviewers: campbellbarton, brecht, sergey
Reviewed By: campbellbarton, sergey
CC: sergey
Differential Revision: https://developer.blender.org/D531
Note it was already the case for many simulations (cloth, rigidbody, etc.), just doing this
systematically in BKE_ptcache_add() now, will avoid us some recurring bug reports.
Advanced users will know when they can/have to raise this parameter!
There is not much sense to have a whole BLI file just to check SSE2 on CPUs...
So idea is to rename it to more generic "BLI_system", and add to it more system-related
utils, like e.g. an include helper for getpid(), which allows to hide unix/windows
internals from rest of the code...
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D439
