The idea is to only use pointers to particles in original object when
creating an edit structure. The derived mesh we get from evaluated
object.
The rest of the commit is just keeping pointers in sync.
Note that due to RNA get/setters issue, that one may actually add some
G.main usages to the total... But at least it's not hidden anymore in a
very low-level, dark corner of BKE pointcache code!
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This reverts commit 5aa19be912 and b4a721af69.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
Add read/write/interpolate functions.
In order to get rigid body point cache id from object it's now required to pass the
scene to BKE_ptcache_ids_from_object().
Rigid body cache is drawn in the orange color of the bullet logo.
Issue was caused by cycles being duplicated curve objects before converting
them to mesh. This duplication will loose pointcache which resulted in object
not being properly deformed.
added some missing functions too - which are not used yep but should be there for api completeness.
* CDDM_set_mloop
* CDDM_set_mpoly
* BLI_mempool_count
Committed changes from previous weeks, biggest changes are:
* Canvas can now have multiple "surfaces" that each can have specific format, type and settings.
* Renewed UI to support this new system.
* Aside from old "image sequence" output format, Dynamic Paint can now work on vertex level as well. Currently vertex paint and displace are supported.
* Integrated vertex level painting with Point Cache.
* Added viewport preview for Point Cache surfaces.
Due to massive amount of changes, old Dynamic Paint saves are no longer supported. Also some features are temporarily missing or may not work properly.
* Viscoelastic springs between the fluid particles can simulate all kinds
of viscous and elastic substances, such as jelly and honey. This is
achieved by creating springs dynamically between neighboring particles
and adjusting their rest length based on stretching/compression.
* This nearly completes the currently intended functionality for particle
fluids. The last missing thing is a surfacing extraction algorithm,
which is needed for a proper representation of a sph fluid.
* I also cleaned up and renamed some of the fluid parameters to make the
ui a bit easier to understand.
* One addition to the patch is an option to use "initial rest length" for
the springs, which uses the lengths between the particles at the time of
spring creation as the spring rest lengths instead of interaction radius/2.
This makes the fluid keep it's original shape better (good for very
viscoelastic materials), but can create large density differences inside
the fluid (not really physically correct for a fluid).
* Viscoelastic springs are stored in point cache as extra data.
* Not strictly necessary right now, but better for future.
* Struct data (only boids at the moment) is now written as structs (with dna) so they work between 64 and 32 bit machines too.
