Use float in moto instead of double for MT_Scalar.
This switch allow future optimization like SSE.
Additionally, it changes the OpenGL calls to float versions as they are
very bad with doubles.
Reviewers: campbellbarton, moguri, lordloki
Reviewed By: lordloki
Subscribers: brecht, lordloki
Differential Revision: https://developer.blender.org/D1610
This class did nothing but print out extensions if they were found.
Instead, the code from bge.logic.PrintGLInfo() is now printed as the
Rasterizer is initialized. This gives better information, and it removes
some GL code from KX_PythonInit.cpp (the PrintGLInfo method now calls
the Rasterizer to print the information).
Differential Revision: https://developer.blender.org/D438
The only use we had for RAS_StorageIM was to render derived meshes using
Blender's mesh drawing. This is now handled as a special case in
RAS_OpenGLRasterizer instead of in RAS_StorageIM.
We are now left with RAS_StorageVA and RAS_StorageVBO. At the moment
vertex arrays are still the default since our vertex array with display
lists implementation is still much faster than our VBO code in a lot of
cases. As we improve our VBO code, we can drop vertex arrays since
Blender's minimum OpenGL version is being bumped up to 2.1, which
supports VBOs.
This patch allows the game engine to keep running while performing things like PNG compression and disk I/O.
As an example, my crowd simulation rasterizer saves a screenshot for every frame. This now takes up 13 msec per frame, which was 31 msec before this patch. Effectively, it allows the simulation to save every frame and still run at 60 FPS.
Reviewers: lordloki, moguri, panzergame
Reviewed By: moguri, panzergame
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1507
I have removed the m_pHitObject, m_xray and m_testPropName and replace them by a temporary struct "RayCastData" which contains these datas and a collision mask. Finally i add a collision mask argument in the python function "rayCast" :
```
rayCast(to, from, dist, prop, face, xray, poly, mask)
```
It can be useful to hit only object which are on the right colision layer. for example if you have hitbox for a charater or vehicle you don't want to hit it with raycast.
test file : {F237337}
left mouse click on two planes and see console messages.
Somewhat more elaborate test file by @sybren: {F237779}
Look around and click on the cubes. One cube lamp responds, the other doesn't, based on their collision groups.
Reviewers: moguri, hg1, agoose77, campbellbarton, sybren
Reviewed By: agoose77, campbellbarton, sybren
Subscribers: campbellbarton, sergey, blueprintrandom, sybren
Projects: #game_engine, #game_physics
Differential Revision: https://developer.blender.org/D1239
The issue was caused by the following construction:
def = env['SOMETHING']
defs.append('SOMETHING_MORE')
Since first assignment was actually referencing environment option it was totally
polluted hawing weird and wonderful side effects on all other areas of Blender.
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
The expression module now uses an EXP prefix and it follows a
distribution similar to blender.
Additionally the hash function in EXP_HashedPtr.h was simplified and the
files EXP_C-Api.h &.EXP_C-Api.cpp were deleted because were unused.
Reviewers: campbellbarton, moguri, sybren, hg1
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1221
Actually it is only possible to pass float properties to a 2D filter (GLSL fragment shader).
This patch allows also to use integer properties for the 2D filter.
Reviewers: sybren, agoose77, kupoman, moguri, lordloki, panzergame
Reviewed By: lordloki, panzergame
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1370
This is essential for video projection, and the alternative until now was to manually change the projection matrix via Python.
( http://www.blender.org/manual/game_engine/camera/introduction.html#camera-lens-shift
- this page will be removed as soon as I commit this)
Also this is working for perspective and orto cameras BUT if the sensor is not AUTO it will only look correct in blenderplayer (this is an unrelated bug, but just in case someone runs into it while testing this, now you know why you got the issue).
Kudos for the BlenderVR project for supporting this feature development.
Differential Revision: https://developer.blender.org/D1379
Fix T38030.
In c++ source we use one list for triangles and an other for quads, but KX_PolyProxy doesn't care about that and return the vertex offset in its list. So we just have to compute the offset of each RAS_DisplayArray to its previous to have an absolute vertex index.
Reviewers: moguri, campbellbarton, kupoman, agoose77, brita_, hg1
Reviewed By: agoose77, hg1
Projects: #game_engine
Maniphest Tasks: T38030
Differential Revision: https://developer.blender.org/D1324
This patch adds a new API function to get the actual display dimensions in pixels.
Reviewers: dfelinto, sybren, lordloki, moguri
Reviewed By: lordloki, moguri
Differential Revision: https://developer.blender.org/D648
Code clean up for BGE world mist, background and global ambient color.
Move mist render update to BlenderWolrdInfo
Reviewers: moguri, brecht
Reviewed By: moguri, brecht
Differential Revision: https://developer.blender.org/D152
This patch adds the missing setMistType() and setMistIntensity() to the API
Reviewers: campbellbarton, brecht, moguri
Reviewed By: campbellbarton, brecht, moguri
Subscribers: campbellbarton, dingto
Differential Revision: https://developer.blender.org/D149
This patch fix the existing word API for mist and global ambient lighting.
Add deprecated message to disableMist()
Add setUseMist(enable).
Reviewers: dfelinto, campbellbarton, moguri
Reviewed By: moguri
Subscribers: solarlune, jta, brecht
Projects: #bf_blender:_next
Differential Revision: https://developer.blender.org/D148
We make sure that good values are passed to GetPolygon() and we check that the visual mesh doesn't have a wrong displacement when it passes over a object which has a mesh triangle as compound bound.
Reviewers: dfelinto, sergof, agoose77, moguri
Reviewed By: moguri
Subscribers: agoose77
Differential Revision: https://developer.blender.org/D979
Yep, at last it's here!
There are a few minor issues remaining but development can go on in
master after discussion at blender institute.
For full list of features see:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Painting
Thanks to Sergey and Campbell for the extensive review and to the
countless artists that have given their input and reported issues during
development.
The shadow render passes could set a mesh's modified status to false
even if they were not rendered. This means their display lists do not
get updated. For now, just skip setting all buckets' modified to false
during shadow render passes.
I'm not sure why this function ever increased the object's refcount. Any
place in the code that calls KX_GameObject::GetParent() has to turn
around and call parent->Release(). Forgetting to call Release() was a
common cause of memory leaks (in fact, KX_SteeringActuator was probably
leaking). If the refcount needs to be increased, the calling code can
handle calling AddRef().
The ultimate goal is to only allow the rasterizer to handle OpenGL and bf_gpu
calls. This commit creates a RAS_ILightObject interface and a RAS_OpenGLLight
implementation.
GPC_Canvas::GetWindowArea() and KX_BlenderCanvas::GetWindowArea() are tracking two
different things. The 2d filter system doesn't actually need the window area and
can get by just using the viewport dimensions, which it now does. The GetWindowArea()
mess should probably be cleaned up.
This mode is designed for passive 3D TV: the viewport is split
horizontally - left eye above, right eye below - but the original camera
viewport is squashed in each half (with half the vertical resolution).
This is necessary to restore the aspect ratio in the 3D output because the TV expands each half to the full screen size.
