This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
This patch adds list colors to the light theme for the spreadsheet,
which are needed for the data set region. Addresses T92492.
Differential Revision: https://developer.blender.org/D13090
Currently, both inactive and active tabs are using the `Region Text` theme property.
This patch makes it so active tabs use `Region Text Highlight`.
Since this check is done in other places already but was simply missing in this case, I believe this was just an oversight and not a design decision.
Top is master, bottom is this patch:
{F11520838, size=full}
This allows this kind of tab highlight, not possible before since all tabs would have white text.
{F11520873, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13003
This patch makes the background grid of the node editor a grid of dots
instead of lines. This makes the background look a bit more subtle and
reduces visual complexity. The dots are meant to provide a reference
when panning and zooming. Based on the design of @pablovazquez, and
a patch originally authored by @fabian_schempp.
The "Grid Levels" controls how many levels of dots are drawn. As the
editor zooms in, the higher levels of dots fade in, making them closer
together visually. The zoom factor at which each grid starts and ends
fading in is controllable in the code, and could be tweaked further
in the future. The new default value is 7, out of a range from 0 to 9.
Differential Revision: https://developer.blender.org/D10345
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Before committing D10224, bundled preset names that are lowercase need
updating to title case for display in the UI. This changes several of
the preset file names to title case, and fixes a couple of other naming
issues in the preset names. A few strings in the code are also changed
to reflect the new filename of the Blender keymap.
The outline for the active modifier was abusing the property search
match theme color, as noted in a comment. This commit adds a new
theme color in RNA specifically for the active modifier outline.
During the development of the new nodes in the `geometry-nodes` branch
the color of the new nodes wasn't considered, so all of the nodes ended
up red, the color for "input" nodes. This patch introduces two new
colors, one for "Geometry" and one for "Attributes". There are only two
attribute nodes currently, but the next sprint will add two more,
attribute mix, and sample from texture. The attribute nodes are
conceptually different enough from the nodes that modify the geometry
that they deserve their own color.
Differential Revision: https://developer.blender.org/D9682
Previously, the alternate row color in the Video Sequence Editor was
just a shaded version of the editor's background color. This makes it
theme-able just like in the file browser and outliner, although the
default color is very slightly different.
Differential Revision: https://developer.blender.org/D9634
The icons originally chosen for the collection colors were selected
during development and had a few issues with contrast in the light
theme, and the gray color was not a good choice against the default gray
backgrounds.
The new colors are more readable in both default Blender themes. Gray
was replaced with pink.
Differential Revision: https://developer.blender.org/D9504
Both the default theme and Blender Light have been updated.
Blender Light also includes automatically generated colors based on the
default theme that were not set previously.
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
We will use a highlight on panel headers to convey that they have
a search match, so this commit initializes the theme color for the
properties editor.
Differential Revision: https://developer.blender.org/D8854
The outliner already uses the alternating row theme color as an
overlay for every other row. This uses the same color for the file
browser, instead of a hardcoded shading.
The file browser background color is slightly tweaked to match the
outliner, and the Blender Light theme is updated to use a lighter
background color like the outliner.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8717
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
This is a temporary solution for T77173 for the 2.83 release. D7203
provides a more long term solution for future releases.
This adds theme colors for the three report backgrounds, setting them
to the color used in 2.82. A separate commit in the addons repository
will follow for changes to the bundled themes.
Differential Revision: https://developer.blender.org/D7908
This color had it's alpha reduced in the drawing code,
as the active face is no longer stippled.
Now the color is used from the theme without adjusting the alpha.
This patch include changes:
- Thicker and clearer selection indication
- Slimmer handles
- More transparent muted strips
- Trim frame number is drawn inside the strip
- Strip text is drawn in upper part of strip
- Color strips now have specific color, with chosen color drawn under strip text
- Transition strip will use color of input strips showing direction of transition
- Selecting effect strip will highlight input strips
- Selecting multicam strips will highlight target channel
- Missing media state is now indicated by a red line drawn on the top part of the strip
- A checkerboard pattern is now drawn on the outsides of the meta range
- Hold still regions are now always drawn if existent, with a darker shade of the strip’s background color
Author: Alessio Monti di Sopra <a.monti>
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6883
This commit adds 7 themes submitted by the community on Devtalk. These themes both serve specific purposes, provide a greater variety in look & feel, and serve as welcoming homes for users coming on board from other packages. This is the initial commit, but these themes can be continuously updated over time to fix issues and keep them up to date with changes.
Thanks to all contributors, and in particular the makes of the picked themes: Pierre Schiller, Edward Agwi, Vojtěch Lacina, Michail Soluyanov, Jason van Gumster, Mr Wax Police & Jonathan Lampel.
An overview is here: https://developer.blender.org/T74360
Now only the hue is different between different strip types, with the
saturation the same for all.
Differential Revision: https://developer.blender.org/D6775
Adds a toggle to the filter menu for outliner synced selection. Enabled
by default, this ensures selection is synced between objects, bones, and
sequences. An active outliner element theme color is added to indicate
which element is active.
Synced selection is controlled on the operator level. Each operator
that modifies selection for objects, bones, sequences, or outliner
elements needs to call the respective ED_outliner_select_sync_from..
function to tag outliners to be synced.
Syncing is done lazily on outliner draw.
Partially reverts commit 3b58bf3c7e
Green highlights aren't as bright as yellow/orange & were
reverted for the default theme, do the same for the light theme.
* Change circle to roundbox around active icons, so they don't overflow.
* Change text color to indicate selected and active state.
Differential Revision: https://developer.blender.org/D4650
* Align category icons and color use with Default theme.
* Set colors for new properties and regions.
* Fix several issues.
Needs further testing to tackle all editors but this puts it at much more
usable level compared to how it was.
Monochrome colored icons don't work well on a dark background, so now we can
add a border around them. Note that most icons in the interface will remain
without a border, just the outliner and properties editor navigation have
colored icons and those will get a border. Other icons continue to be drawn
in the text colored without a border.
Differential Revision: https://developer.blender.org/D4787
