This resolves one of the last few areas where we still use inappropriate
abbreviations. Reading abbreviated words is usually slower, because
users must parse, guess and translate the words. Using abbreviations
such as 'rot' is also especially bad since it's a word in itself too.
The main advantage of abbreviations is that they are faster to *write*,
which just isn't a concern for text in the UI.
Differential Revision: https://developer.blender.org/D8174
This tool generates masks based on the sculpt vertex colors by clicking
on the model, similar to automatic selection tools in image editing
software.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8157
Added an offset field to control when to load the simulation files. Since this is a very small but helpful addition it is in my view safe to commit at this point of the bcon cycle.
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
This implements a fill mode in the Color Filter tool, which fills the
entire mesh with a specific color.
As this functionality is part of the color filter, this allows to control
the blending of the fill color with the filter strength.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8158
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
The report does not include any file, but probably that file is using the
settings for unified colors, which are currently not available in the UI,
so it always paints black. This enables unified colors and secondary
colors for sculpt vertex colors, so it should solve that issue.
Unified color does not make much sense now as the Paint tool is the only
one that has paint capabilities, but it will do in the future when
sculpt and paint at the same time is enabled and the paint capability is
added to more tools.
Reviewed By: sergey
Maniphest Tasks: T78323
Differential Revision: https://developer.blender.org/D8136
Some audio render settings were hidden in the scene properties. These
settomgs belong in the render properties as they affect the output when
using ffmpeg video.
Fixes T49241
Differential Revision: https://developer.blender.org/D8137
This does not work, because the fluid modifier is not called when the
object is e.g. in edit mode. Another possible fix would be to switch
to object mode when baking starts automatically. However, I think it
is reasonable to simply not allow baking while the domain is in edit mode.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D7848
Right now not all the features available there have the same level of
polishing. So I split the existing options in:
* New Features [Particles Nodes]
* Prototypes [Hair]
* Debugging [Undo]
Differential Revision: https://developer.blender.org/D8121
This commit makes uses of the new OpenVDB IO in Mantaflow (introduced in 781f783a66ac).
From now on, fluid cache files in OpenVDB format will contain a list of grids per frame (before: one .vdb file per grid per frame). Besides regular grids, particle systems are also stored using OpenVDBs PointGrid data structures.
All older cache formats will remain fully functional:
- Uni caches (.uni) files are still available from the UI and can be used as before
- Raw caches (.raw) are no longer available from the UI, but loading them is still possible
- Old OpenVDB caches (one .vdb per grid) can no longer be baked either, but loading them is still possible.
It is also no longer possible to choose file formats for 'Noise' and 'Particles'. Instead there are now options to set the file format for 'Volumetric' and for 'Mesh' data.
Known issues (planned to be resolved soon):
- OpenVDB files are currently not taking into consideration the clipping value (FluidDomainSettings). Empty cells are therefore being written too. Depending on the scene, this can make file sizes unnecessarily large.
- Domains are not being exported at their world position. Instead they are always clipped to the origin.
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
- Head / Tail was stuck on two rows. It seems there is an issue with
headings here, which means the first property has to place its own
label. (So for example the small button can't be first in the row.)
- Some misalignment and decorator fixes for aligned toggles
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
Currently all force effectors can only act on cloth when the force is
perpendicular to the surface. This makes sense for wind, but not for
other forces; and the user may want even wind to have some friction.
This changes effector code to output two force vectors - although
you of course can pass the same pointer for both. The force is split
between the two outputs based on a new per-effector setting.
Differential Revision: https://developer.blender.org/D8017
This values was not working because was removed by error in refactor.
Reviewed By: mendio, fclem
Differential Revision: https://developer.blender.org/D8061
This resolves T73673 by allowing delete hierarchy in all outliner view
modes. It also unifies the collection and object hierarchy delete into a
single operator like in rBae98a033c856. This makes it easier to delete
all selected collection and object hierarchies at once.
This also removes the old object delete hierarchy code in favor of the
batch delete code which has been default for over a year.
Maniphest Tasks: T73673
Differential Revision: https://developer.blender.org/D7675
This patch adds two options:
- Convert a mesh to grease pencil strokes.
- Bake the mesh animation into grease pencil strokes.
Both are related and must be included in the same patch.
Related to tasks: T77629 and T77630
Notice: The conversion is done for mesh edges and it's not considering any visibility clipping. All edges are exported, no matters if it's visible or not.
Example of Convert a Mesh to Grease Pencil strokes:
{F8606028}
This conversion was inspired by the technique used by @luamono in this tweet: https://twitter.com/luamono/status/1239983662176841730
Example of Bake Animation (the video is a little outdate, but the basic functionality is the same, only small changes in UI):
{F8606032}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77629, T77630
Differential Revision: https://developer.blender.org/D7983
When a fluid is put under influence of gravity or acceleration, it
forms an internal pressure gradient, which causes observable effects
like buoyancy. Since now cloth has support for simulating pressure
changes caused by fluid compression or expansion, it makes sense to
also support the effects of gravity.
This is intended for better simulation of objects filled or
surrounded by fluids, especially when constrained by collisions
or pinned vertices, and should result in more realistic shapes.
Obviously, this doesn't actually simulate fluid dynamics; instead
it is assumed that the fluid immediately adapts to changes in the
shape or acceleration of the object without friction or turbulence,
and instantly reaches a new static equilibrium.
Differential Revision: https://developer.blender.org/D6442
This is really doing two operation so using the ampersand makes more
sense.
Also selection sounds better than selected.
This also adjusts the name in the text Edit menu which was an issue
raised in T68738
