This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
This patch provides an optimisation for Ease (Smoothstep) setting in the color ramp node.
This optimisation exists already for Constant and Linear modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6880
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
Apparently the compiled shader bump into some register limit and
the compiler instead of giving an error, does something incorrectly.
Differential Revision: https://developer.blender.org/D6759
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
The ratio for area stretching was packed into an unsigned int, but could
contain negative numbers. This flipped the negative numbers to high
positive numbers and rendered the wrong color in the stretching overlay.
I can remember during {T63755} I had to flip the sign to get the
correct result, but couldn't find out why that was needed. Now I know.
Reviewed By: fclem, mano-wii
Differential Revision: https://developer.blender.org/D6440
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Previously Noise and Wave texture nodes would use noise functions within a [0,1]
range for distortion effects. We either add or subtract noise from coordinates,
never do both at same time. This led to the texture drastically shifting on the
diagonal axis of a plane / cube. This behavior makes the Distortion input hard
to control or animate. Capabilities of driving it with other texture are also
limited, diagonal shifting is very apparent.
This was fixed by offsetting the noise function to a signed range and making it
zero-centered. This way noise is uniformly added and subtracted from coordinates.
Texture pattern sticks to main coordinates which makes it way easier to control.
This change is not strictly backwards compatible, there is versioning to ensure
the scale of the distortion remains similar, but the particular pattern can be
a little different.
Differential Revision: https://developer.blender.org/D6177
Modes: Linear interpolation (default), stepped linear, smoothstep and smootherstep.
This also includes an additional option for the **Clamp node** to switch between **Min Max** (default) and **Range** mode.
This was needed to allow clamping when **To Max** is less than **To Min**.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D5827
When creating shaders and using maths functions it is expected that Blender should match functions in other DCC applications, game engines and shading languages such as GLSL and OSL.
This patch adds missing functions to the Blender maths node.
Ideally, it would be nice to have these functions available to vectors too but that is not part of this patch.
This patch adds the following functions trunc, snap, wrap, compare, pingpong, sign, radians, degrees, cosh, sinh, tanh, exp, smoothmin and inversesqrt.
Sign function is based on GLSL and OSL functions and returns zero when x == 0.
Differential Revision: https://developer.blender.org/D5957
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
The Random Per Island attribute is a random float associated with each
connected component (island) of the mesh. It is particularly useful
when artists want to add variations to meshes composed of separate
units. Like tree leaves created using particle systems, wood planks
created using array modifiers, or abstract splines created using AN.
Reviewed By: Sergey Sharybin, Jacques Lucke
Differential Revision: https://developer.blender.org/D6154
This patch adds a new Vertex Color node. The node also returns the alpha
of the vertex color layer as an output.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5767
This patch allows the Voronoi node to operate in 1D, 2D, and 4D space.
It also adds a Randomness input to control the randomness of the texture.
Additionally, it adds three new modes of operation:
- Smooth F1: A smooth version of F1 Voronoi with no discontinuities.
- Distance To Edge: Returns the distance to the edges of the cells.
- N-Sphere Radius: Returns the radius of the n-sphere inscribed in
the cells. In other words, it is half the distance between the
closest feature point and the feature point closest to it.
And it removes the following three modes of operation:
- F3.
- F4.
- Cracks.
The Distance metric is now called Euclidean, and it computes the actual
euclidean distance as opposed to the old method of computing the squared
euclidean distance.
This breaks backward compatibility in many ways, including the base case.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5743
This patch extends Musgrave noise to operate in 1D, 2D, 3D, and 4D
space. The Color output was also removed because it was identical
to the Fac output.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5566
We basically duplicate the height map branch plugged into the bump node,
and tag each node in each branch as dx/dy/ref using `branch_tag`.
Then we add a one pixel offset on the texture coordinates if the node is
tagged as dx or dy.
The dx/dy branches are plugged into (new) hidden sockets on the bump node.
This match cycles bump better but have a performance impact. Also, complex
nodetrees can now become instruction limited and not compile anymore.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5531
This patch rewrites the Mapping node to support dynamic inputs. The
Max and Min options have been removed. They can be added as Min and
Max Vector Math nodes manually.
Texture nodes still use the old matrix-based mapping. A new SVM node
`NODE_TEXTURE_MAPPING` has been added to preserve this functionality.
Similarly, in GLSL, a `mapping_mat4` function has been added.
Reviewers: brecht, JacquesLucke
This patch extends perlin noise to operate in 1D, 2D, 3D, and 4D
space. The noise code has also been refactored to be more readable.
The Color output and distortion patterns changed, so this patch
breaks backward compatibility. This is due to the fact that we
now use random offsets as noise seeds, as opposed to swizzling
and constants offsets.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5560
Support for UV Stretching overlay during multi object editing. The
VBO now holds the ratios per fase. In the shader these ratios will
be compared against the global ratios. The global rations are created
from all selected objects.
The current implementation does not fit well with the draw module. The
plan is to move the drawing of other spaces towards the draw manager what
leads to a better fit. Currently the details on this solution is unclear
but this requirement will become an attentionpoint in the future design.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5665
This patch continue the efforts to split the `gpu_shader_material` file
started in D5569.
Dependency resolution is now recursive. Each shading node gets its own
file. Additionally, some utility files are added to be shared between
files, like `math_util`, `color_util`, and `hash`. Some files are always
included because they may be used in the execution function, like
`world_normals`.
Some glsl functions appeared to be unused, so they were removed, like
`output_node`, `bits_to_01`, and `exp_blender`. Other functions have
been renamed to be more general and get used as utils, like `texco_norm`
which became `vector_normalize`.
A lot of the opengl tests fails, but those same tests also fail in
master, so this is probably unrelated to this patch.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5616
Compiling this big file for every Eevee material is bad for performance, and
now that we are adding more nodes it gets worse. This patch adds a simple
mechanism to split up that file, and use only the parts used by shader nodes.
When a function is used by GPU_link, we detect which GLSL file it came from
and use it in GLSL code generation automatically. Dependencies between GLSL
files are manually specified, and function names must be unique across all
GLSL files.
Most of the actual splitting up will be done in later commits.
Differential Revision: https://developer.blender.org/D5569
The object color property is added as an additional output in
the Object Info node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5554
Previously there was already "draw_shape" property,
but it was doing nothing. This commit renames the
property to "display_shape". Furthermore, different
shapes like SQUARE and DIAMOND are supported now.
Currently, the shapes are drawn using the shader that also
draws keyframes. In the future we might want to separate
this.
The new shapes are not used anywhere yet, but they can
be used by addon developers and will probably be useful
when we want to support different kinds node systems later.
For example, different shapes can be used to distinguish
between data and control flow.
Differential Revision: https://developer.blender.org/D2829
The Volume Info node provides the Color, Desnity, Flame, and Temperature
of smoke domains.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5551
The White Noise node hashes the input and returns a random number in the
range [0, 1]. The input can be a 1D, 2D, 3D, or a 4D vector.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5550
Add Multiply, Divide, Project, Reflect, Distance, Length, Scale, Snap,
Floor, Ceil, Modulo, Fraction, Absolute, Minimum, and Maximum operators
to the Vector Math node. The Value output has been removed from operators
whose output is a vector, and the other way around. All of those removals
has been handled properly in versioning code.
The patch doesn't include tests for the new operators. Tests will be added
in a later patch.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5523
- Implement dynamic inputs. The second input is now unavailable in single
operand math operators.
- Reimplemenet the clamp option using graph expansion for Cycles.
- Clean up code and unify naming between Blender and Cycles.
- Remove unused code.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5481
For clarity sake, the batch cache now uses exclusively per Loop attributes.
While this is a bit of a waste of VRAM (for the few case where per vert
attribs are enough) it reduces the complexity and amount of overall VBO
to update in general situations.
This patch also makes the VertexBuffers filling multithreaded. This make
the update of dense meshes a bit faster. The main bottleneck is the
IndexBuffers update which cannot be multithreaded efficiently (have to
increment a counter and/or do a final sorting pass).
We introduce the concept of "extract" functions/step.
All extract functions are executed in one thread each and if possible,
using multiple thread for looping over all elements.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D5424
