In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
Selection of an FCurve with box/circle select now selects the entire
curve and all its keys:
- Box selecting a curve selects all the keyframes of the curve.
- Ctrl + box selecting of the curve deselects all the keyframes of the
curve.
- Shift + box selecting of the curve extends the keyframe selection,
adding all the keyframes of the curves that were just selected to the
selection.
- In all cases, if the selection area contains a key, nothing is
performed on the curves themselves (the action only impacts the
selected keys).
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D11181
The "Paste Flipped" operator was missing its own tooltip.
This patch adds the tooltip by implementing the `get_description` callback for
`GRAPH_OT_paste` and `ACTION_OT_paste`.
Reviewed By: sybren
Maniphest Tasks: T87037
Differential Revision: https://developer.blender.org/D10859
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
When NLA strips weren't time-aligned with the underlying action, then
fcurve modifiers would not be drawn anchored to the strip. Fmodifiers
were evaluating properly, they just weren't drawn with the proper
offset and scale.
To fix it in this specific case, I've chosen to undo the keyframe
remapping then remap the draw-evaluation-time from scene time to
fcurve time. Afterward, I redo the keyframe remapping so the controls
are properly drawn.
The Envelope fmodifier has special drawing code which was fixed too. In
this case, no mapping at all was happening. The solution was similar,
to remap the envelope control points from fcurve time to scene time.
Fix keyframe properties not being editable when animating a
library-overridden datablock.
The problem was that RNA pointers were created based on the datablock
affected by the animation (for example an Object), instead of the
datablock that contains the FCurve itself (the Action). The latter can
be local to the current blend file and should thus be editable, even
when the former is not.
Reviewed By: mont29
Maniphest Tasks: T81965
Differential Revision: https://developer.blender.org/D10091
confirmation
Deleting keyframes in the dopesheet or graph editor always required
confirmation, even if used ouside of the "Delete" menus.
Now add a "confirm" option [same as for deleting objects], which can be
disabled for immediate keyframe deletion.
This will also change the default behavior and bring this in line with
how object deletion works so there is one shortcut for bringing up the
menu/confirmation and another shortcut to delete immediately without
requiring confirmation / another click:
- Blender Default keymap: "X" for menu, "Del" for immediate
- Industry Compatible: "Backspace" for menu, "Del" for immediate
Maniphest Tasks: T70316
Differential Revision: https://developer.blender.org/D9651
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
Approximately 33 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D9796
Reviewed by Julian Eisel
Using 'is/means/equal' words in place of equal sign in descriptions.
Differential Revision: https://developer.blender.org/D9799
Reviewed by Hans Goudey
Extract initialisation code of box selection into separate functions.
No functional changes.
Reviewed By: zeddb, sybren
Differential Revision: https://developer.blender.org/D9196
When clicking on an already-selected keyframe, mark it as active if the
click caused the previously-active keyframe to become deselected.
When clicking on a key in the graph editor, it is selected and all other
keys are deselected. If that key was already selected before the click,
it would not become the active keyframe. This is now fixed.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D9639
Split some of the code of `graph_edit.c` into:
* `graph_view.c`: preview range, view all, view selected etc.
* `graph_slider_ops.c`: the decimate modal operator code.
The latter file will be extended later with more slider-based operators.
Maniphest Tasks: T81785
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9312
This new discontinuity filter performs actions on the entire Euler
rotation, rather than only on the individual X/Y/Z channels. This makes
it fix a wider range of discontinuities, for example those in T52744.
The filter now runs twice on the selected channels, in this order:
- New: Convert X+Y+Z rotation to matrix, then back to Euler angles.
- Old: Add/remove factors of 360° to minimize jumps.
The messaging is streamlined; it now reports how many channels were
filtered, and only warns (instead of errors) when there was an actual
problem with the selected channels (like selecting three or more
channels, but without X/Y/Z triplet).
A new kernel function `BKE_fcurve_keyframe_move_value_with_handles()` is
introduced, to make it possible to move a keyframe's value and move its
handles at the same time.
Manifest Task: T52744
Reviewed By: looch
Differential Revision: https://developer.blender.org/D9602
Split up the Euler filter function into two more functions. The Euler
filter operator works in two stages (find channels that define the X/Y/Z
Euler rotations, and perform filtering on those channels), and each
stage now has its own function. This makes it clearer which data are
used in which part of the code, and makes future improvements easier.
No functional changes.
Select only editable keys on selected curves when "Only Show Selected
Curves" is enabled in the Graph Editor's View menu.
This prevents selecting invisible keys with box, circle, and lasso
select in the Graph Editor.
Reviewed By: looch
Differential Revision: https://developer.blender.org/D9580
Add a new property `co_ui` to Keyframes, the modification of which will
apply to the keyframe itself as well as its Bézier handles.
Dragging the "Keyframe" slider in the properties panel now maintains the
deltas between the keyframe and its handles, just like moving the key in
the graph editor would.
Reviewed by @sybren in T81813.
Fixes 18 misspellings of 'predefined', 'Look Up', 'Lookup', and 'No One'.
Differential Revision: https://developer.blender.org/D9466
Reviewed by Hans Goudey
