This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
Remove the workaround for T59395 that increases the minimal refinement to 2
to work around an OpenSubdiv bug. This bug appears to be fixed in the latest
OpenSubdiv version we are using.
Problem found by Piotr Ostrowski.
Ref D9076
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
This adds the option to either smooth the entire boundary, or to keep
corners sharp, for the Subdivision Surface and Multiresolution modifiers.
This mainly helps with compatibility with other software. The default
behavior remains to smooth the entire boundary.
Differential Revision: https://developer.blender.org/D8485
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
The "Grab Active Vertex" in sculpt mode highlights the vertex and
the neighbor vertices. This was working wrong in the case when mesh
has multires modifier at sculpt level 0 and has shape keys.
The issue was caused by the wrong crazy space calculation, which was
ignoring subdivision level. This is an oversight from the initial
implementation: the modifier has no effect if the subdivision level
is 0.
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
This adds an option to the Multires modifier to sculpt directly on the
base mesh while previewing the displacement of a higher subdivisions
level. What this does it considering Multires as a regular modifier
without exposing the grid displacement to sculpt mode.
This allows to see the propagation happening in real time, which enables
to use complex tools like Cloth or Pose in much higher resolutions and
without surface noise and artifacts.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8555
Adjusting the layout for this modifier is the final part of the modifier UI
project for 2.90. This layout exposes the most important information,
the levels and subdivision controls, by default, putting other contols
in collapsed subpanels.
Note that there is empty space for the "Delete Lower" button
that is still planned for 2.90. And there will also eventually be more
items added to the "Shape" panel, maybe for 2.90.
Differential Revision: https://developer.blender.org/D8187
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
These changes didn't make it through the transition to the new UI layout.
- Add "has_displacement" check
- Add "sculpt_levels" property
- Give subdivide operators the operator name so they work
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
Show control edges stores the control edges in the mesh which is
picked up by the draw manager. When applyng a subsurf (or multires) we
don't want that data present in the base mesh. Any rebuilding of the mesh
would overwrite the data anyway.
This patch introduces a new flag for applying modifiers
that can be checked to ignore storing display specific data in
the base mesh.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7163
Makes it work better "out of the box" for irregular topology like
Suzanne mesh.
There might be some performance impact on non-regular meshes, but
those are not very common usecase for multires and for those its
always possible to lower the quality if needed.
The issue was caused by crazy space distortion orientation happening
for subsurf modifier.
Solved by making it so subsurf only deforms the surface but keeps
matrices as-is. This is not fully mathematically correct, but is better
that the fall-back solution which was doing wrong matrices anyway.
Also, this is closer to have subsurf was handled prior to the
related changes.
Reviewed By: brecht, pablodp606
Differential Revision: https://developer.blender.org/D5991
Currently unused but the intention is to use this to hook up these
modifiers to a generic deformed PBVH to make it easier to sculpt or
paint on a subdivided mesh.
Also fixes bug where mesh with multires modifier is invisible in render
while in sculpt mode.
Differential Revision: https://developer.blender.org/D5099
This is something where there is no single correct behavior,
sometimes it's needed to ignore the crease to make mesh more
smooth. But sometimes crease is to be considered after first
subdivision surface: for example, when adding extra subdivisions
for render-time displacement.
Made it an option whether modifier needs to take crease into
account or not.
Existing files should be openable in the 2.7 compatible way,
to re-create an old behavior the options is to be manually
disabled in the modifier settings.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4652
Allows to preserve topology cache even when copy-on-write is
fully re-copying the object. For example, toggling edit mode
in and out does no longer causes full topology to be re-created.
The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
The SubdivCCG structure was re-allocated, but the cached one in
the sculpt session was still pointing to an original one.
This is rather a workaround, but is least evil from what i can
currently think. Remember something similar was also required in
2.7 as well.
Definitely need to revision this change.
This commit makes it so both Subdivision Surface and Multiresolution
modifiers are caching OpenSubdiv topology. This cuts down evaluation
time quite a bit, especially for meshes which don't have many extra
ordinary verticies.
Only working for animation. Other modifications like edit mode needs
more work to make topology cache preserved by copy-on-write.
