While it's an extra option added to the interface which might not be
fully obvious for artists, it allows to save up to 20% of memory in
hairy scenes.
This is high enough memory saver in my opinion which might become
handy for some production files where it's more important to make
scene to fit into memory rather than trying to use more optimal BVH
structure but go into swap or crash.
Reviewers: dingto, brecht
Reviewed By: dingto, brecht
Differential Revision: https://developer.blender.org/D2090
At some point the idea was that we could have an optimization where we could
render multiple render layers without re-exporting the scene, by just updating
the layer bits. We are not doing this now and in practice with the available
render layer control like exclude layers it's not always possible anyway.
This makes it easier to support an arbitrary number of layers in the future
(hopefully this summer), and frees up some useful bits in the kernel.
Reviewed By: sergey, dingto
Differential Revision: https://developer.blender.org/D2020
Note that this only removes the actual dependencies of Cycles on the
particle code in Blender, but not the internal "particle" definition
or the curve type handling inside Cycles. These structures may be in need
of some improvement themselves, but that is out of scope here.
This is to prevent situations such as when the camera gets very close to a mesh
and causes it to be tessellated into an excessive amount of micropolygons. In
REYES this is known as the eye-splits problem.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1922
This makes it easier to control overall dicing rate without having to tweak
every object. The preview rate makes viewport editing more interactive. The
default preview rate of 8 is roughly 64 times faster for some operations.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1919
Basically the idea is to make code robust against extending
enum options in the future by falling back to a known safe
default setting when RNA is set to something unknown.
While this approach solves the issues similar to T47377,
but it wouldn't really help when/if any of the RNA values
gets ever deprecated and removed. There'll be no simple
solution to that apart from defining explicit mapping from
RNA value to Cycles one.
Another part which isn't so great actually is that we now
have to have some enum guards and give some explicit values
to the enum items, but we can live with that perhaps.
Reviewers: dingto, juicyfruit, lukasstockner97, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1785
Really annoying bug, the code was not forward compatible at all and
resulted in crash. And it is really good to keep at least one release
forward compatibility so possible regressions could be verified easily.
The idea now is to use new property name for the pixel filter type,
but keep old property around for a couple of releases, so we have at
least some forward compatibility.
Don't like this situation at all, but seems it's least of the evil
we can choose.
Thanks Brecht for the review!
This way we avoid passing structures which could be up to
few hundred bytes by value to the utility functions.
Ideally we'll also have to add `const` qualifier in majority
of the calls, but C++ RNA does not allow us to do that because
it does not know if some function modifies contents or not.
This commit overrides the user's choice of tile order in the case of viewport rendering and always uses bottom-to-top instead.
This was already done until the TileManager redesign, but since it removed the distinction between viewport and regular rendering
in the manager, the viewport was now also using the selected order. Since this requires sorting of the generated tiles,
it slows down rendering a bit. With the forced bottom-to-top order, this sorting step can now be avoided again.
Since the tile order is invisible anyways for viewport rendering, this commit won't have any impact on users (apart from a slight speedup).
This is sort of extension of existing Use Environment option which now allows to
disable AO on the render layer basis.
Useful in cases like disabling AO for the background because it might make it
too flat and so.
Reviewers: juicyfruit, dingto, brecht
Reviewed By: brecht
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1633
This adds an option to control at what time relative to the current frame
the shutter is fully opened. Supported options are:
- Shutter is starting to open at the current frame
- Shutter is fully opened at the current frame
- Shutter is fully closed at the current frame
Custom shutter time offset is possible, same as custom curve for shutter
openness but those are considered nice things to have rather than something
crucial.
Reviewers: juicyfruit, dingto
Subscribers: venomgfx, hjalti
Differential Revision: https://developer.blender.org/D1380
This removes the BVH cache feature from the UI, underlying code will be removed in a separate commit.
The BVH cache was added before we had a multi-threaded BVH build, and a lot of other optimizations were done since then, which makes this not useful anymore.
Fix T46162.
Works totally similar to camera motion blur and majority of the changes are
related on just passing extra arguments to sync() functions.
Couple of things still to look into:
- Motion pass will not include motion caused by the zoom.
- Only perspective cameras are supported currently.
- Motion is being interpolated on projected coordinates, which might give
different results from constructing projection matrix from interpolated
field of view.
This could be good enough for us, but we need to consider improving this
at some point.
Reviewers: juicyfruit, dingto
Reviewed By: dingto
Differential Revision: https://developer.blender.org/D1383
For animations, you often want an animated render seed (noise pattern).
This could be done by e.g. setting a driver on the seed value.
Now it's a little checkbox, that can be enabled.
The animated seed is based on the current Blender frame and
the seed value itself. Simply enabling it, will already result in an animated
seed (different on each Blender frame), but it can be randomized further
by setting a different seed value.
Disabled per default, so no backward compatibility break.
Differential Revision: https://developer.blender.org/D1285
There were two major problems with the interactivity of material previews:
- Beckmann tables were re-generated on every material tweak.
This is because preview scene is not set to be persistent, so re-triggering
the render leads to the full scene re-sync.
- Images could take rather noticeable time to load with OIIO from the disk
on every tweak.
This patch addressed this two issues in the following way:
- Beckmann tables are now static on CPU memory.
They're couple of hundred kilobytes only, so wouldn't expect this to be
an issue. And they're needed for almost every render anyway.
This actually also makes blackbody table to be static, but it's even smaller
than beckmann table.
Not totally happy with this approach, but others seems to complicate things
quite a bit with all this render engine life time and so..
- For preview rendering all images are considered to be built-in. This means
instead of OIIO which re-loads images on every re-render they're coming
from ImBuf cache which is fully manageable from blender side and unused
images gets freed later.
This would make it impossible to have mipmapping with OSL for now, but we'll
be working on that later anyway and don't think mipmaps are really so crucial
for the material preview.
This seems to be a better alternative to making preview scene persistent,
because of much optimal memory control from blender side.
Reviewers: brecht, juicyfruit, campbellbarton, dingto
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1132
It is still possible to free a bit more memory by detecting buildin images
which are not used by shaders, but that's not going to improve memory usage
that much to bother about this now.
Such change brings peak memory usage from 4.1GB to 3.4GB when rendering
01_01_01_D layout scene from the Gooseberry project. Mainly because of
freeing memory used by rather huge environment map in the viewport.
Reviewers: campbellbarton, juicyfruit
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D1215
This inconsistency drove me totally crazy, it's really confusing
when it's inconsistent especially when you work on both Cycles and
Blender sides.
Shouldn;t cause merge PITA, it's whitespace changes only, Git should
be able to merge it nicely.
This flag is global for all the sessions and never changes. so it doesn't
really make sense to pass it around to all sessions and synchronization
routines.
Switched to a static member of BlenderSession now, but it's probably more
logical to introduce some sort of BlenderGlobals. Doesn't currently worth
a hassle for a single boolean flag tho.
This is the same as blender internal's texture mapping from another object,
so this way it's possible to control texture space of one object by another.
Quite straightforward change apart from the workaround for the stupidness of
the dependency graph. Now shader has flag telling that it depends on object
transform. This is the simplest way to know which shaders needs to be tagged
for update when object changes. This might give some false-positive tags now
but reducing them should not be priority for Cycles and rather be a priority
to bring new dependency graph.
Also GLSL preview does not support using other object for mapping.
This is actually correct for BI shading as well and to be addressed as
a part of general GLSL viewport improvements since it's not really clear
how to support this in GLSL.
Reviewers: brecht, juicyfruit
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1021
The reason for this is that we don't sue SSE optimization for 32bit platforms
because of T36316.
Things to look into:
- Nail the root of the issue of that report
- Implement non-SSE traversal code for QBVH
We might remove this again in the future, but for testing purposes
during the release cycle, this will be useful.
The setting defaults to QBVH, and can be found in the Performance panel.
This commit enables QBVH optimization structure automatically if rendering
with CPU and SSE2 support is detected.
This brings render time of agent shot back to the speed it used to be before
the watertight intersections commit, single koro and sponza scenes are about
7% faster here.
The issue was caused by GLEW MX enabled in SCons by default so
basically previous commit already fixed the crash. But we need
to be safe here.
For now the fix is simple and not that clean, just check if
there's an OpenGL context available and if not we don't do any
GLSL magic.
This is to be cleaned up after some discussion with the viewport
project guys.
It can be helpful in some cases and it works properly, so no need to hide it behind the experimental flag anymore. It's only enabled for the CPU though.
This gives you "Multiple Importance", "Distance" and "Equiangular" choices.
What multiple importance sampling does is make things more robust to certain
types of noise at the cost of a bit more noise in cases where the individual
strategies are always better.
So if you've got a pretty dense volume that's lit from far away then distance
sampling is usually more efficient. If you've got a light inside or near the
volume then equiangular sampling is better. If you have a combination of both,
then the multiple importance sampling will be better.
This adds a new option "Sample All Lights" to the Sampling panel in Cycles (Branched Path). When enabled, Cycles will sample all the lights in the scene for the indirect samples, instead of randomly picking one. This is already happening for direct samples, now you can optionally enable it for indirect.
Example file and renders:
Blend file: http://www.pasteall.org/blend/27411
Random: http://www.pasteall.org/pic/show.php?id=68033
All: http://www.pasteall.org/pic/show.php?id=68034
Sampling all lights is a bit slower, but there is less variance, so it should help in situations with many lights.
Patch by myself with some tweaks by Brecht.
Differential Revision: https://developer.blender.org/D391
This adds an option in the Volume Sampling panel, which helps rendering lamps
inside or near volumes with less noise. It can also increase noise though and
needs improvements to support MIS and heterogeneous volumes, but since it's
useful in some cases already (especially world volumes) it's there now.
Based on the code in the old branch by Stuart, with modifications by Thomas
and Brecht.
Differential Revision: https://developer.blender.org/D291
