The title says it all actually. From tests with barber shop scene here
gives 2-3x speedup for shader compilation on my oldie i7 machine. The
gain is mainly due to textures metadata query from jpeg files (which
seems to requite de-compression before metadata can be read). But in
theory could give nice improvements for scenes with huge node trees
as well (i'm talking about node trees of complexity of fractal which
we had reports about in the past).
Reviewers: juicyfruit, dingto, lukasstockner97, brecht
Reviewed By: brecht
Subscribers: monio, Blendify
Differential Revision: https://developer.blender.org/D2215
Bump mapping was happening in world space while displacement happens in object
space, causing shading errors when displacement type was used with bump mapping.
To fix this the proper transforms are added to bump nodes. This is only done
for automatic bump mapping however, to avoid visual changes from other uses of
bump mapping. It would be nice to do this for all bump mapping to be consistent
but that will have to wait till we can break compatibility.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2191
The two SVM nodes added with e7ea1ae78c caused a slowdown on AMD cards when rendering with OpenCL, whether displacement was used or not.
In the Barcelona Pavillon scene on a RX480, this would cause a 12% slowdown.
Therefore, this commit adds a additional flag for feature-adaptive compilation so that the new SVM nodes are only enabled when they are needed (Node tree connected to the Displacement output and Displacement type set to Both).
Also, the nodes were also added to shaders when the Displacement Type was set to Bump (the default), which was unneccessary and is fixed now.
Thanks to linda2 on IRC for reporting and testing and to maiself for help with the displacement shader code.
This fix might be relevant for 2.78, but it should be tested further before including it.
Object coordinates can now be used in the displacement shader and will give
correct results, where as before bump mapping was calculated from the displace
positions and resulted in incorrect shading.
This works by evaluating the shader in two parts, first bump then surface, and
setting the shader state to match what it would be if the surface was
undisplaced for the bump shader evaluation. Currently only `P` is set as if
undisplaced, but other shader variables could be set as well, such as `I` or
`time`. Since these aren't set to anything meaningful for displacement I left
them out of this patch, we can decide what to do with them separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Storing multiple copies of a shader was needed when the displacement method was
a mesh option and could be different for each mesh. Now that its a shader option
this is unnecessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Mainly makes logging less verbose when doing progressive sampling in viewport.
Such kind of verbosity is not really possible to be filtered out with `grep`
so let's reshuffle few lines of code.
When World MIS is enabled by the user, we now check if we actually need it.
In case of a simple node setup (no procedurals, no HDRs..) we auto disable MIS internally to save render time.
This change is important for upcoming default changes.
This gives about 2x speedup (3.2sec vs. 11.9sec with 32716 handled nodes) when
updating shader for the shader tree.
Reviewers: brecht, juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1700
Use Summary structure to collect all summary related on the shader compilation
process which then could be either simply reported to the log or be passed to
some user interface or so.
This is type of the summary / report which is most flexible and useful and
something we could use for other parts like shader optimization.
Seems set_intersection() requires passing explicit comparator if non-default
one is used for the sets. A bit weird, but can't really find another explanation
here about whats' going on here.
The issue was caused by not really optimal graph traversal for gathering nodes
dependencies which could have exponential complexity with a long tree branches
connected with multiple connections between them.
Now we optimize the depth traversal and perform early output if the node was
already traversed.
Please note that this adds some limitations to the use of SVM compiler's
find_dependencies() in the cases when skip_node is not NULL and one wants to
perform dependencies find sequentially with the same set. This doesn't happen
in the code, but one should be aware of this.
The issue was than nodes dependencies were stored as set<ShaderNode*> which
is actually a so called "strict weak ordered", meaning order of nodes in
the set is strictly defined, but based on the ShaderNode pointer. This means
that between different render invokations order of original nodes could be
different due to different pointers allocated for ShaderNode.
This commit makes it so dependencies and maps used for ShaderNodes are based
on the node->id which has much more predictable order. It's still possible
to trick the system by doing some crazy edits during viewport rendfer and
cause difference between viewport and final render stacks.
Reviewers: brecht
Reviewed By: brecht
Subscribers: LazyDodo
Differential Revision: https://developer.blender.org/D1630
Basically we can not use sharp closure as a substitude when filter glossy is
used. This is because we can not blur sharp reflection/refraction.
This is quite quick and not really clean implementation. Not really happy
with manual handling of original settings, but this is as good as we can do
in the quick patch. It's a good acknowledgment and we now can re-consider
some aspects of graph simplification to make such cases more natively
supported.
P.S. This failure would have been shown by our regression tests, so please,
bother a bit to run Cycles's test sweep before doing such optimizations.
Now we calculate color in range 800..12000 using an approximation a/x+bx+c for R and G and ((at + b)t + c)t + d) for B.
Max absolute error for RGB for non-lut function is less than 0.0001, which is enough to get the same 8 bit/channel color as for OSL with a noticeable performance difference.
However there is a slight visible difference between previous non-OSL implementation because of lookup table interpolation and offset-by-one mistake.
The previous implementation gave black color outside of soft range (t > 12000), now it gives the same color as for 12000.
Also blackbody node without input connected is being converted to value input at shader compile time.
Reviewers: dingto, sergey
Reviewed By: dingto
Subscribers: nutel, brecht, juicyfruit
Differential Revision: https://developer.blender.org/D1280
This is the same as blender internal's texture mapping from another object,
so this way it's possible to control texture space of one object by another.
Quite straightforward change apart from the workaround for the stupidness of
the dependency graph. Now shader has flag telling that it depends on object
transform. This is the simplest way to know which shaders needs to be tagged
for update when object changes. This might give some false-positive tags now
but reducing them should not be priority for Cycles and rather be a priority
to bring new dependency graph.
Also GLSL preview does not support using other object for mapping.
This is actually correct for BI shading as well and to be addressed as
a part of general GLSL viewport improvements since it's not really clear
how to support this in GLSL.
Reviewers: brecht, juicyfruit
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1021
This was the original code to get things working on old GPUs, but now it is no
longer in use and various features in fact depend on this to work correctly to
the point that enabling this code is too buggy to be useful.
for one of the input shaders is zero.
This gives about 5% speedup for koro_final.blend. In general this is important
so you can design shaders that run faster for shadows, diffuse bounces, etc, for
example by skipping procedural textures or even using a single fixed color.
In practice this means that if you don't connect a texture to your volume nodes
it will figure that out and render the node faster, rather than you having to
specify it manually.
Main weakness is custom OSL nodes where we have to assume it is heterogeneous
because we don't know what kind of data the node accesses.
This should be pretty rare, the shader in question had many parallel node links
because of copying the nodes many times, which is inefficient to run anyway.
* Added a new sky model by Hosek and Wilkie: "An Analytic Model for Full Spectral Sky-Dome Radiance" http://cgg.mff.cuni.cz/projects/SkylightModelling/
Example render:
http://archive.dingto.org/2013/blender/code/new_sky_model.png
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Sky_Texture
Details:
* User can choose between the older Preetham and the new Hosek / Wilkie model via a dropdown. For older files, backwards compatibility is preserved. When we add a new Sky texture, it defaults to the new model though.
* For the new model, you can specify the ground albedo (see documentation for details).
* Turbidity now has a UI soft range between 1 and 10, higher values (up to 30) are still possible, but can result in weird colors or black.
* Removed the limitation of 1 sky texture per SVM stack. (Patch by Lukas Tönne, thanks!)
Thanks to Brecht for code review and some help!
This is part of my GSoC 2013 project, SVN merge of r59214, r59220, r59251 and r59601.
New features:
* Bump mapping now works with SSS
* Texture Blur factor for SSS, see the documentation for details:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Shaders#Subsurface_Scattering
Work in progress for feedback:
Initial implementation of the "BSSRDF Importance Sampling" paper, which uses
a different importance sampling method. It gives better quality results in
many ways, with the availability of both Cubic and Gaussian falloff functions,
but also tends to be more noisy when using the progressive integrator and does
not give great results with some geometry. It works quite well for the
non-progressive integrator and is often less noisy there.
This code may still change a lot, so unless you're testing it may be best to
stick to the Compatible falloff function.
Skin test render and file that takes advantage of the gaussian falloff:
http://www.pasteall.org/pic/show.php?id=57661http://www.pasteall.org/pic/show.php?id=57662http://www.pasteall.org/blend/23501
