Previously the pose library used the WholeCharacter key set, which ignores
selection and add keys for almost all bones in the rig. This is a very
slow operation on complex rigs. With this patch, only selected bones are
keyed, defaulting to keying all bones when none are selected.
Note that this fixes the FIXME previously mentioned in the source.
Drawing used colors for select (TH_EDGE_SELECT/TH_VERTEX_SELECT) which was inconsistent with crease, seam, sharp, .. (which all had their own them color -- also was a bit hard to read).
NOTE: UI team usually doesn't allow adding more theme options, this is an exception.
Differential Revision: https://developer.blender.org/D2234
Uses similar way of storing temp data as object copy paste, just
uses different read entrypoint which does not modify current bmain.
This gives ability to easily copy-paste poses from one blender to
another one.
Hopefully doesn't introduce user-measurable differences.
Request from Peer here in the studio.
Reviewers: mont29
Reviewed By: mont29
Subscribers: hjalti, fsiddi
Differential Revision: https://developer.blender.org/D2229
The idea is to allow certain animation channels to be always visible in
animation editors. So, for example, one can pin Camera animation to the
editor so it is always possible to refine/tweak camera animation when
animating something else in the scene.
There is probably some more polishing required, and some current
limitations could be solved in the future but should be a good starting
point already.
Currently only works for object without recursing into deeper datablock
(so for example, it's not possible to pin object material animation).
Studio request by Colin Levy.
Now the factor works similar to other Blender areas to make the factor
more consistent for artists. The value 0% means equal to original
stroke, 100% equal to final stroke (50% means half way). Any value below
0% or greater than 100% create an overshoot of the stroke.
Two new modal operators to create a grease pencil interpolate drawing
for one frame or a complete sequence between two frames. For drawing
the temporary strokes in the viewport, two drawing handlers have been
added to manage 3D and 2D stuff.
Video: https://youtu.be/qxYwO5sSg5Y
The operator shortcuts are Ctrl+E and Ctrl+Shift+E. During the modal
operator, the interpolation can be adjusted using the mouse (moving
left/right) or the wheel mouse.
In User Preferences, Properties Editor and toolshelf, Ctrl+Tab and Ctrl+Shift+Tab now activates the next or previous space context (or category in case of toolshelf tabs), respectively.
For Properties Editor such functionality was completely missing, only toolshelf allowed cycling using ctrl+mousewheel (or only mousewheel while hovering tab region). Ctrl+Tab and Ctrl+Shift+Tab are common web browser shortcuts, so they're a reasonable choice to go with.
Reaching the first/last item doesn't cause the cycling to stop, we continue at the other end of the list then. (I didn't add this to Ctrl+Mousewheel toggling in toolshelf since I wanted to keep its behavior unchanged.)
We could get rid of (Ctrl+)Mousewheel cycling in toolshelf, but this may break user habits.
The cycling happens using a new operator, UI_OT_space_context_cycle, for toolshelf tabs it's hardcoded in panel handling code though.
Generalized rna_property_enum_step a bit and moved it to rna_access.c to allow external reuse.
Reviewed By: venomgfx
Differential Revision: https://developer.blender.org/D2189
Issue was that the wm.open_mainfile OP caused all handlers to be removed and since rB45592291 cancelled (which is correct in general), the menu that triggered the OP should not be cancelled though.
Not sure if this is a nice fix or not, it's however the safest fix I found. A different fix would be to call UI_popup_block_close before WM_operator_call_ex (in dialog_exec_cb), but not sure how safe this is and want to further investigate if it makes other hacks/fixes redundant.
There's still a crash with --debug-memory that confused the heck out of me (since I always have --debug-memory enabled), but I'll commit fix for that separately.
The little grabby handle in the corner of an area. Now uses 1 draw call
instead of 6.
Also one version of the (+) icon to show a hidden region. Why do we
have multiple versions of this?
Fixed a harmless signed/unsigned error.
Fixed a GL state error that prematurely disabled blending.
Added imm_draw_filled_circle function, which can be used for drawing
other widgets.
Work toward T49042 and T49043
Keeping unused gla2D code because it might be useful, or inspire
something useful, for Blender 2.8 development.
Also removed an old Mac driver bug workaround. Disabled this before the
2.77 release and nobody has complained.
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
Report popups simply reuse popup menu code, so their blocks got "UI_popup_menu_begin" assigned as name, which was a bit misleading. Now uses "UI_popup_menu_reports".
Ideally they'd have their own popup code.
The snapping functions when performed in the perspective view,
have some problems in the threshold (a distortion) and in the clip plane (the normal is incorrect).
These problems can be only observed when making the snap to edges or to vertices (nearest to ray function).
This patch propose a totally different solution.
The idea is to project the edges of bvh nodes and test the 2d projection of the snap element.
For this it used the BLI_bvhtree_walk_dfs function.
It is important to pay particular attention also to the changes in `ED_transform_snap_object_project_view3d_ex`
Currently "long keyframes" are only useful for indicating where stationary
holds occur. If however you try to create a "moving hold" (where the values
are slightly different, but in terms of overall effect, it's still a hold)
then it could get tricky to keep track of where these occur.
Now it's possible to tag such keyframes (using the keyframe types - RKEY)
as being part of a moving hold. These will not only be drawn differently
from normal keyframes, but they will also result in a "long keyframe"
being drawn between each pair of them, just like if they had been completely
stationary instead.
Currently the theming/styling of these is a bit rough. They reuse the existing
theme colours for long keyframes.
This commit introduces a scale factor setting for scaling all keyframe indicators
in the Dopesheet Editor up/down, in order to make them easier to select. It is perhaps
most useful for keyframe types which are usually indicated using smaller keyframes
(e.g. breakdown), which may get tricky to quickly select.
Problem was in fact slightly wider, File space was nearly not taking into account
library navigation case and its 'virtual' directoris, except in a few places.
Add a wrapper around BLI_is_dir that also check for lib paths, and used it in
ED_file_change_dir(), such that we now always check path is a
valid directory - in the filebrowser context, not filesytem context. ;)
To get this working the least effort, I've had to expose the helper functions
used by the lasso and circle select keyframe-test callbacks (which are generic)
and expose them for use by the GP keyframe editing code too. Hopefully in time
we clean this all up and just write the code once to operate on "keyframes"
This only works in the Action and Dopesheet modes (which operate on FCurve keyframes).
Support for Grease Pencil and Mask Keyframes though is still pending.
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
Being granular means we need to re-build depsgraph a bit more often..
The issue was caused by rigidbody requiring some special nodes to
handle physics which were not created with just tagging object for
update.
This covers the following workflow. Animator will disable Update All 3D views
in order to get quick playback in a particular 3D editor. However, it also
handy to see playback in all editors and image editors to see comparison of
animation and reference footage.
So the idea here is to refresh reasonable editors when playback is invoked
from animation editors.
Commit to make Hjalti happy.
