Modifier code was asking for filtered textures without sending derivatives.
Disabled this and also checks for filtered/non-filtered.
Brecht, I assumed this was ok due to the existence of the p->osatex variable
- if this isn't what you had in mind, please change or let me know :)
Used approach with creating DerivedMesh for curves whet they've got such modifiers.
Available modifiers are: array, edge split, mirror, solidify, subsurf.
His log:
There is a small typo in copy_curve(): there will be serious troubles
if this functions is called for OB_FONT in edit mode (for my cases
it is segmentation fault).
I think we should set editfont to NULL for cloned curves (as it is made
for edit nurb).
This bug was found by trying to edit text with applied Cast modifier
and while I was searching what's wrong, I've found that in
castModifier_deformVerts() DerivedMesh is creating for all objects,
but in castModifier_*_do() derived mesh is used only for OB_MESH
objects. Maybe this place could be optimized a bit by skipping DM
creation for non-meshes?
properly on file loading. Some things get preserved on file save/load,
like object matrices and armature poses, but other things need to be remade
like derivedmeshes and displists. The latter were not tagged for recalc on
load causing them to be made on countall or redraw typically, so not in the
right order and dependencies on hidden layer were not done at all.
Now these get tagged for recalc and flags flushed on load. There shouldn't
be much if any slowdown on opening existing files, if there is it should be
fixable.
- use mirror when the option is enabled in editmode.
- fliped group names are used when they exist.
- only the setting that is edited will be applied to the mirrored verts group.
- copy value is applied to all mirrored verts of the selection.
- normalize normalizes all vgroups and mirrors.
utility functions defvert_sync and defvert_sync_mapped, similar to defvert_copy but does not remove existing groups and optionally creates groups as needed.
defvert_sync_mapped uses a an int array for mapping the flipped values.
levels, child particles, and shadow/SSS/AO quality.. Now also works on what
is displayed in the 3d view instead of only rendering, see panel in the scene
properties.
Most file changes were to make scene available in the isDisabled modifier
callback function.
- particle set weight operator (Shift + K) and from the menu.
- mirror vertex groups operator can also flip weight group names.
a number of utility functions for weight groups added
int *get_defgroup_flip_map(struct Object *ob);
void flip_vertexgroup_name (char *name_r, const char *name, int strip_number); // moved from modifier.c
void copy_defvert (struct MDeformVert *dvert_r, const struct MDeformVert *dvert);
void flip_defvert (struct MDeformVert *dvert, int *flip_map);
Fix#20516: subsurf modiefier+pressing add for smoke sims results in crash.
Fix retopo not working correct on subsurf mesh.
Various deforming modifiers were not correctly taking into account that a
derivedmesh is not necessarily a CDDerivedMesh, made utility functions for
this now.
Mostly the same as the recently added editmode tool with some extras.
* Options to disable filling in the rim between inner and outer surface, since its faster not to detect this in cases where its not needed.
* Option to disable high quality normal calculation, mostly noticable when operating on building walls, not needed for cloth or more organic shapes.
* Option to disable 'even thickness', again, not needed in some cases.
Also options for creasing inner/outer and rim edges, need this for makign Sintels cloths solid since zero crease looks far too soft.
note:
* UVs and VCols etc are copied to the new skin however rim faces dont get the UVs or vcols set from the faces they are created from yet.
* Normals are assumed to be pointing outwards
* used patch from Uncle Entity as a template since it added the DNA and RNA entries but the actual modifier from the patch wasnt used.
* Now support a Surface mode next to the existing Volume mode. This binds
the mesh to the cage mesh surface rather than it's volume.
* Implemented reusing the bone heat weighting code.
* Advantage is that it works for cage meshes that are not volumes and that
binding is much faster.
* Weak point is that disconnected components of a mesh are not guaranteed
to stick together (same problem exists with bone heat weighting).
* Bind weights could still be compressed better to use less memory.
Example file:
http://download.blender.org/ftp/incoming/cloth_mdef_surface.blend
* Displacement coordinates are now stored differently, as a grid per
face corner. This means there is duplication of coordinates, especially
at low subdivision levels, but the simpler implementation justifies it
I think.
* ToDo: conversion of existing multires files (2.4x or 2.5x), loading them
may even crash now.
* Editmode preservation/interpolation code also has not been updated yet.
* Multires now works on the CCGDerivedMesh grids instead of CDDerivedMesh,
which should be more memory efficient.
* There are still bad memory peaks (if you're using 32bit) when subdividing
or propagating displacements. Though at least there should be no huge
memory blocks allocated, which windows is now to have trouble with.
* Still found some weird spike artifacts at lower multires levels, some also
happening before this commit. Perhaps computation of tangents needs to be
tweaked more.
* Multires modifier now has viewport, sculpt and render levels. Also the
levels have been made consistent with subsurf, previously the same level
of subdivision was one less for multires.
* Both multires and subsurf modifier now can have their subdivision level
set to 0 for no subdivision.
Rather than applying the modifier to the object data, it will create a new shape
with the deformed vertices in there. Only mesh at the moment, other object
types on the todo.
* structural can be set to 0
* pre-roll now available through GUI and works like following:
a) Pre rolled frames are NOT cached
b) reset cache + cloth on pre roll setting change
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
Blended shape keys can now be displayed & edited in edit mode. This
is much like showing an armature modifier in edit mode, and shape keys
now are a applied as a virtual modifier (for mesh & lattice only, curve
doesn't fit in the stack well due to tilt).
The main thing missing still is being able to switch between the active
shape key in edit mode, that's more complicated.. but the weights of
other shapes can be edited while in edit mode.
One thing to be careful about is that this does automatic crazyspace
correction, which means that if you edit a shape key with a low value,
the actual vertices will be moved to correct for that and actually move
a (potentially much) longer distance.
Also includes some UI tweaks, mainly placing some buttons horizontally
since the vertical list was getting too long.
Also:
* UI now takes ID self check flag into account so that e.g. it
doesn't offer to the make object it's own parent.
* Mesh loop cuts number of cuts had wrong limits.
* Don't use mesh_get_derived_final in modifier stack, but
ob->derivedFinal instead. Avoids crashes on dependency loops,
and in case there is no loop it should have been created.
* #19583: Keying Sets list issues
Deleting a Keying Set (or a Keying Set Path) set the active index to 0, but that would mean that the first item would be selected but not visible.
* #19590: Keyframing properties of a modifier with more than one of it's type the property will highlight in all
- Modifiers now always have a unique name, so renaming a modifier should check that the name is unique. Most of the files changed in this commit were just to make sure that modifiers got unique names when they were created
- Modifiers path getter was wrapped a bit wrong (missing the "s around the name)
* Constraints Bugs
- Constraints renaming now also makes sure the names stay unique
- Fixed (or attempted to fix) compiler warnings about some enum declaration for distance constraint
The goodies:
* Curves can be used as normal dynamic effectors too with
the new "curve" field shape.
* Group visualization has optional duplication counts for
each object in the specified group.
* Object & group visualizations, which are done without
taking the dupliobject's global position into account
(unless the whole group is used). This is much nicer than
the previous behavior, but I added a "Use Global Location"
option for those who want to use it the old way.
* The active particle system's particles are now drawn a
with theme coloured outline instead of pure white.
* Added object aligned velocity factors (buttons categorized
and re-organized too).
Bug fixes:
* Absorption didn't work as the ui toggle button was forgotten.
* Some other force field ui tweaks.
* Crash after adding children and changing trails count.
* Display types "cross" and "axis" crashed.
* Particles weren't drawn with correct coloring.
* Billboards didn't update properly in viewport to camera
location changes.
* Particle rotation wasn't recreated correctly from point cache.
* Changing particles amount crashed sometimes.
* Some files with child hair crashed on loading.
* Compiler warning fixes.
* Adding boids crashed on frame 1;
