Expose a this function to initialize any zeroed axes
to an orthogonal vector based on other non-zeroed axes.
This functionality already existed for `invert_m#_m#_safe_ortho`,
expose as a public function as it's useful to be able to fill in zeroed
axes of transformation matrices since they may be used in matrix
multiplication which would create degenerate matrices.
This commit refactors the point distribute node to skip realizing
the instances created by the point instance node or the collection
and object info nodes. Realizing instances is not necessary here
because it copies all the mesh data and and interpolates all
attributes from the instances when this operation does not
need to modify the input geometry at all.
In the tree leaves test file this patch improves the performance of
the node by about 14%. That's not very much, the gain is likely larger
for more complicated input instances with more attributes (especially
attributes on different domains, where interpolation would be necessary
to join all of the instances). Another possible performance improvement
would be to parallelize the code in this node where possible.
The point distribution code unfortunately gets quite a bit more
complicated because it has to handle the complexity of having many
inputs instead of just one.
Note that this commit changes the randomness of the distribution
in some cases, as if the seed input had changed.
Differential Revision: https://developer.blender.org/D10596
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
Unlike invert_m4_m4_safe, this calculates zeroed axes.
Useful when we need to use the inverse of an objects matrix,
keeping the valid axis, only filling in the zeroed ones.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
Currently the only option is to warp based on the transform of other
objects, which is inconvenient if you want to e.g. control it through
a driver - you need to set up a dummy object and go through that,
which is clunky and should be unneccessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6690
Currently the action channels are applied after the existing
transformation, as if the action controlled a child of the
bone. This is not very natural, but more importantly, the
transform tools are not designed to work conveniently with an
additional 'pseudo-child' transformation, resulting in effects
like an unexpected pivot location.
Implementing a Before mode that integrates the action channels
as if applied to a parent allows using the special transform
tool code intended for dealing with such constraints.
Note that in either mode, Action constraints should be added
in reverse order, putting a new constraint before the existing
ones that the Action was keyframed to work together.
In order to implement the option, extract a utility from
the Copy Transform constraint code for combining transforms
with special anti-shear scale handling that matches the
Aligned Inherit Scale mode.
The Before mode also requires switching the constraint to
the Local owner space, while the After mode can still use the
World space for efficiency as before. Since the constraint
doesn't have an Owner space option in the UI, this has to be
handled in an RNA setter.
For full backward compatibility, the original simple matrix
multiplication mode is preserved as the third option, but it
is not recommended due to creating shear.
Differential Revision: https://developer.blender.org/D6297
Upon close inspection, the way the Offset mode works in the
Copy Rotation constraint makes no sense, and in fact, destroys
the rotation of its owner unless either it's single axis, or
the order is set specifically to `ZYX Euler`.
Since it can't simply be changed because of backward compatibility
concerns, replace the checkbox with a dropdown that provides a set
of new modes that actually make sense.
Specifically, add a mode that simply adds Euler components together,
and two options that use matrix multiplication in different order.
The Python use_offset property is replaced with compatibility stubs.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5640
As an inherent property of matrix-based transformation math, non-
uniform scaling of a parent bone induces shear into the transform
matrix of any rotated child. Such matrices cannot be cleanly
decomposed into a combination of location/rotation/scale, which
causes issues for rigging and animation tools.
Blender bones have options to exclude rotation and/or scale from the
inherited transformation, but don't have any support for removing the
often undesired shear component. That goal requires replacing simple
parenting with a combination of multiple bones and constraints. The
same is true about the goal of inheriting some scale, but completely
avoiding shear.
This patch replaces the old Inherit Scale checkbox with a enum that
supports multiple options:
* Full: inherit all effects of scale, like with enabled Inherit Scale.
* Fix Shear: removes shear from the final inherited transformation.
The cleanup math is specifically designed to preserve the main
axis of the bone, its length and total volume, and minimally
affect roll on average. It however will not prevent reappearance
of shear due to local rotation of the child or its children.
* Average: inherit uniform scale that represents the parent volume.
This is the simplest foolproof solution that will inherit some
scale without ever causing shear.
* None: completely remove scale and shear.
* None (Legacy): old disabled Inherit Scale checkbox.
This mode does not handle parent shear in any way, so the child
is likely to end up having both scale and shear. It is retained
for backward compatibility.
Since many rigging-related addons access the use_inherit_scale
property from Python, it is retained as a backward compatibility
stub that provides the old functionality.
As a side effect of reworking the code, this also fixes a matrix
multiplication order bug in the Inherit Rotation code, which caused
the parent local scale to be applied in world space. In rigger
opinion this option is useless in production rigs, so this fix
should not be a problem.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5588
matrix inversion was changed in rB01c75c3765eb from own code to EIGEN
for performance reasons. EIGEN would return a zero matrix on failure
(resulting in the pivot always being at the object origin).
This brings back the "old" matrix inversion code (which has the benifit
of providing a partial solution which makes the local transform center
appear correct)
Reviewers: campbellbarton
Maniphest Tasks: T57767
Differential Revision: https://developer.blender.org/D4804
Unlike location and rotation, there is a meaningful definition of
overall/average scaling via the total change in the volume. This
adds an option to retrieve that via a single driver variable,
instead of having to use three and an expression.
Using the determinant to compute the volume scaling also allows
detecting flipping due to negative scale - this is impossible
to do via the three variable approach.
The volume_scale functions are added purely for code readability:
'volume scale factor' is easier to understand than determinant.
Differential Revision: https://developer.blender.org/D4803
Previously B-Bone deformation mapped every vertex to just one
B-Bone segment. This results in abrupt transformation differences
between the sides of each threshold plane, reducing the quality
of B-Bone deformation and making the use of shape keys impractical.
This commit replaces this approach with a linear blend between
the two closest segment transformations, effectively representing
the B-Bone as two weight-blended plain bones for each vertex.
In order to distribute the interpolation more evenly along the
bone, segment matrices for deformation are now computed at points
between the segments and at the ends of the B-Bone. The computation
also uses the true tangents of the Bezier curve for the orientation.
The nodes at the end of the bone require some special handling to
deal with zero-length Bezier handles caused by a zero ease value.
The Copy Transforms constraint now also smoothly interpolates
rotation and scaling along the bone shape when enabled.
The initial version of the patch was submitted by @Sam200.
Differential Revision: https://developer.blender.org/D4635
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
- Remove 'rotate_m2', unlike 'rotate_m4' it created a new matrix
duplicating 'angle_to_mat2' - now used instead.
(better avoid matching functions having different behavior).
- Add 'axis_angle_to_mat4_single',
convenience wrapper for 'axis_angle_to_mat3_single'.
- Replace 'unit_m4(), rotate_m4()' with a single call to 'axis_angle_to_mat4_single'.
mul_m4_m4m4(R, A, B) gives us R = AB in general. Existing code assumed the worst, that A and B both alias the output R. For safety it makes internal copies of A and B before calculating & writing R.
This is the least common case. Usually all 3 matrices differ. Often we see M = AM or M = MB, but never M = MM.
With this revision mul_m4_m4m4 is called in exactly the same way but copies inputs only when needed. If you know the inputs are independent of the output use the "uniq" variant to skip the saftety checks.
mat3_polar_decompose gives the right polar decomposition of given matrix,
as a pair (U, P) of matrices.
interp_m3_m3m3 uses that polar decomposition to perform a correct matrix interpolation,
even with non-uniformly scaled ones (where blend_m3_m3m3 would fail).
interp_m4_m4m4 just adds translation interpolation to the _m3 variant.
`BLI_space_transform_from_matrices()` defines a 'global-invariant' transform
(same point in global space, two different coordinates in local and target spaces).
New `BLI_space_transform_global_from_matrices()` is kind of opposite, it defines
a 'local-invariant' transform (two different points in global space, same coordinates in local and target spaces).
Useful to 'match' meshes.
