This commit makes it so that subsurf/multires modifiers will respect
the WITH_OPENSUBDIV option. The WITH_OPENSUBDIV_MODIFIER option is
now gone.
For artists it mean that subsurf modifier will behave same as it is
planned for 2.80. Multires will now support sculpting, but it has some
known limitations. Those will be worked on before the final release.
If OpenSubdiv is disabled, no subsurf/multires functionality will
present.
For the details see:
https://wiki.blender.org/wiki/Reference/Release_Notes/2.80/Modeling#Subsurf.2FMultires
For users it defines how accurate vertex positions are in terms
of limit surface (as in, how close the vertices locations to the
condition when they are calculated for an infinitely subdivided
mesh).
This affects things like:
- Irregular vertices (joint of 3 or more edges)
- Crease
Keep quality value low for performance.
NOTE: Going higher does not necessarily mean real improvement
in quality, ideal case might be reached well before maximum
quality of 10. Quality of 3 is a good starting point.
Internally quality is translated directly to adaptive subdivision
level.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D3599
The modifier performed the 'bind' operation not in the bind operator,
but delayed in the mesh evaluation. This saved the result in a CoW copy
instead of in the actual modifier data. The binding operator now follows
the same approach as Mesh Deform: it forces the modifiers to run on the
real (non-CoW) data, making it possible for the modifier to store the
binding data.
This commit also ports the usage of DerivedMesh to Mesh.
We've got quite comprehensive BMesh based implementation, which is way easier
for maintenance than abandoned Carve library.
After all the time BMesh implementation was working on the same level of
limitations about manifold meshes and touching edges than Carve. Is better
to focus on maintaining one boolean implementation now.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D3050
Nothing terribly exciting, just a hackish implementation of solid mode CDDM
drawing for cases when we are building with core profile.
The goal is to be able to see SOMETHING with new OpenGL for thew guys who
tests alembic and friends in blender2.8 branch. This is a temporary solution,
the whole drawing will be reworked. Limited to hardcoded material and lighting.
Selection outline color is also hardcoded because of lack of glColor() in the
core profile.
After this commit there is no big stoppers from stop worrying about legacy
OpenGL, so we can go core profile as the only way for Blender.
While some areas will become broken after that, we'd better just fix them
after that and for now just focus on more important design work.
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
Nothing much to say here, basic tool to make normals point toward a target,
or to make them point 'outward' as if object was a spheroid (useful for game bushes etc.).
Also, forgot a big thank you to Campbell for the extensive review work he has done on this project!
Not much to add, modifier uses same code as operator basically, only key difference
is that modifier will never create data layers itself, you have to use dedicated operator
for that.
Goal of this commit is to support NGons for boolean modifier
(currently mesh is being tessellated before performing boolean
operation) and also solve the limitation of loosing edge custom
data layers after boolean operation is performed.
Main idea is to make it so boolean modifier uses Carve library
directly via it's C-API, avoiding BSP intermediate level which
was doubling amount of memory needed for the operation and which
also used quite reasonable amount of overhead time.
Perhaps memory usage and CPU usage are the same after all the
features are implemented but we've got support now:
- ORIGINDEX for all the geometry
- Interpolation of edge custom data (seams, crease)
- NGons support
Triangulation rule is changed now as well, so now non-flat
polygons are not being merged back after Carve work. This is
so because it's not so trivial to support for NGons and
having different behavior for quads and NGons is even more
creepy.
Reviewers: lukastoenne, campbellbarton
Differential Revision: https://developer.blender.org/D274
Based on patch [#30837] UV Offset Modifier
by Pawel Kowal (pkowal)
- Allows you to setup a transformation between objects to apply to UV coords.
- Option to select which axis apply to U/V.
- Option to select the UV center (needed for transformations that scale or rotate).
- Uses from/to objects in a similar way to the Warp modifier.
- Vertex group can be used to adjust influence.
Useful for bump map baking where a consistent triangulation should be enforced when baking/exporting/importing, to avoid artifacts caused by a different triangulation of the mesh by that which was used for baking by internal/external tools.
documentation is here http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.65/More_Features
Will probably add some pictures too to demonstrate the issue that is solved more clearly.
Currently using the skin modifier icon, will soon change that.
Review by Brecht, thanks!
Skin modifier documentation:
http://wiki.blender.org/index.php/User:Nicholasbishop/SkinModifier
Implementation based in part off the paper "B-Mesh: A Fast Modeling
System for Base Meshes of 3D Articulated Shapes" (Zhongping Ji,
Ligang Liu, Yigang Wang)
Note that to avoid confusion with Blender's BMesh data structure,
this tool is renamed as the Skin modifier.
The B-Mesh paper is current available here:
http://www.math.zju.edu.cn/ligangliu/CAGD/Projects/BMesh/
The main missing features in this code compared to the paper are:
* No mesh evolution. The paper suggests iteratively subsurfing the
skin output and adapting the output to better conform with the
spheres of influence surrounding each vertex.
* No mesh fairing. The paper suggests re-aligning output edges to
follow principal mesh curvatures.
* No auxiliary balls. These would serve to influence mesh
evolution, which as noted above is not implemented.
The code also adds some features not present in the paper:
* Loops in the input edge graph.
* Concave surfaces around branch nodes. The paper does not discuss
how to handle non-convex regions; this code adds a number of
cleanup operations to handle many (though not all) of these
cases.
