This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
Add tool options to control how select operates (add/sub/set/and/xor).
Note: edit mode armature select still needs to support all options,
this is complicated by how it handles partial end-point selection.
- Access with Shift-LMB or from the 'Create' toolbar tab.
- Uses curve fitting for bezier curves, with error and corner angle options.
- Optional tablet pressure to curve radius mapping.
- Depth can use the cursor or optionally draw onto the surface,
for the entire stroke or using the stroke start.
- Stroke plane can optionally be perpendicular to, or aligned to the surface normal.
- Optional radius tapering and for start/end points.
- Supports operator redo and calling from Python.
Since Cmd + A works elsewhere, it should work during font objects editing as well.
There is still a mysterious issue with Cmd + Z not working for UNDO the edited
text in OSX (probably GHOST related).
When pasting text, the style (bold, material, ...) is maintained, if it was originally copied from Blender.
This fixes the issue of missing copy/paste options for font objects
(they were present back in Blender 2.49)
Reviewers: Severin, campbellbarton, brecht
Our current keymap doesn't give us enough room to make such changes in
the event system. To fix small issues caused by this, we would need to do
drastic changes in Blender's keymaps and internal handling. It was worth
a try, but it didn't work.
I can write down a more descriptive statement in a few days, but for now
I need a break of this stuff.
Design task: T42339
Differential Revision: D840
Initial implementation proposal: T41867
Short description:
With this we can distinguish between holding and tabbing a key. Useful
is this if we want to assign to operators to a single shortcut. If two
operators are assigned to one shortcut, we call this a sticky key.
More info is accessible through the design task and the diff.
A few people that were involved with this:
* Sean Olson for stressing me with this burden ;) - It is his enthusiasm
that pushed me forward to get this done
* Campbell and Antony for the code and design review
* Ton for the design review
* All the other people that gave feedback on the patch and helped to
make this possible
A big "Thank You" for you all!
- Add paste from system clipboard which behaves like paste from file.
- Paste from file now replaces the selection rather then just adding to the end.
- Move paste operations into the 'Edit' menu.
- Added generic paste functions: font_paste_wchar, font_paste_utf8.
- Fix paste max length check not taking the selection length into account.
There were several issues with how bounding box and texture space
are calculated:
- This was done at the same time as applying modifiers, meaning if
several objects are sharing the same curve datablock, bounding
box and texture space will be calculated multiple times.
Further, allocating bounding box wasn't safe for threading.
- Bounding box and texture space were evaluated after pre-tessellation
modifiers are applied. This means Curve-level data is actually
depends on object data, and it's really bad because different
objects could have different modifiers and this leads to
conflicts (curve's data depends on object evaluation order)
and doesn't behave in a predictable way.
This commit moves bounding box and texture space evaluation from
modifier stack to own utility functions, just like it's was done
for meshes.
This makes curve objects update thread-safe, but gives some
limitations as well. Namely, with such approach it's not so
clear how to preserve the same behavior of texture space:
before this change texture space and bounding box would match
beveled curve as accurate as possible.
Old behavior was nice for quick texturing -- in most cases you
didn't need to modify texture space at all. But texture space
was depending on render/preview settings which could easily lead
to situations, when final result would be far different from
preview one.
Now we're using CV points coordinates and their radius to approximate
the bounding box. This doesn't give the same exact texture space,
but it helps a lot keeping texture space in a nice predictable way.
We could make approximation smarter in the future, but fir now
added operator to match texture space to fully tessellated curve
called "Match Texture Space".
Review link:
https://codereview.appspot.com/15410043/
Brief description:
http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2013/Results#Curve_Texture_Space
Forward enum declaration is a bad idea, especially for C++ which requires
enum specification to dteermine which data type to use to store it.
Alternative would be to not use enum as an arument and pass it as int,
but actually would rather be strict on typing -- using explicit enum
as parameter type helps understanding the code and prevents possible
mistakes when using the function.
