Caused by capturing local variables by reference in a function that
outlives the scope it was created in. Also use a more generic function
for the first two inputs.
I don't think this has been visible, since I only ran into it after
changing other code that affected this. However, some attributes
can keep a reference to the source component to use when tagging
caches dirty (like the position attribute tagging the normals dirty).
Here, the component was created inside a function, then the attributes
were used afterwards.
Also add some comments warning about this in the header file.
When COM_EXPORT_GRAPHVIZ is enabled, DebugInfo::graphviz
uses a char[1000000] as local variable. When this function
is called this is allocated on the stack, which has a size
of just 1MB on mac and may cause a stack overflow.
This patch allocates the memory on the heap and frees
the memory at the end of the function.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13628
This should be faster because it avoids reallocating the internal
vectors when the size is known beforehand, but it may also help
a potential refactor to a different data structure (see T94193).
Toggling node mute doesn't cause node trees to reevaluate after
rB7e712b2d6a0d257. Toggling a link mute still works though. To fix this,
the operator tags the node and node with a new update tag function
(that uses an existing tag internally).
Differential Revision: https://developer.blender.org/D13653
`SOCK_IN_USE` is now set in `update_socket_used_tags` in
`node_tree_update.cc` when a node tree is changed.
It doesn't need to run every single redraw. Removing this
results in a small speedup of 0.4 ms when drawing a tree
with about 4000 nodes (from about 70 ms total).
Differential Revision: https://developer.blender.org/D13645
This replaces the single-threaded calculation of mesh min and max
positions with a `parallel_reduce` loop. Since the bounding box
of a mesh is retrieved quite often (at the end of each evaluation,
currently 2(?!) times when leaving edit mode, etc.), this makes for a
quite noticeable speedup actually.
On my Ryzen 3700x and a 4.2 million vertex mesh, I observed
a 4.4x performance increase, from 14 ms to 4.4 ms.
I added some methods to `float3` so they would be inlined, but
they're also a nice addition, since they're used often anyway.
Differential Revision: https://developer.blender.org/D13572
Fix is similar to how CollectionObject with NULL object pointers are handled.
Using one of the 'free' pad bytes in Object_Runtime struct instead of a
gset (or other external way to detect object duplicates), as this is
several times faster.
NOTE: This makes remapping slightly slower again (adds 10 extra seconds
to file case in T94059).
General improvements of remapping time complexity, especially when
remapping a lot of IDs at once, is a separate topic currently
investigated in D13615.
This commit fixes the crash itself, however this can still lead to a
same collection 'owning' the same object several time.
Issue here was a bad assumption in layer resync code, that would lead to
removing valid objects from the viewlayer's `object_bases_hash` in
`BKE_layer_collection_sync`, when deleting no-more-used bases, in case
of bases duplicate.
The cast to size_t leads to a build issue on 32
bit archs. cursor_delim_type_utf8 expects an int
so an additional cast to size_t is not required.
Reported by user frispete on devtalk.
The problem was the number of points for each edge of the box was wrong and the wheelmouse effect was anulated.
Also fixed the value displayed in the status bar to keep consistency with subdivision value.
Reviewed By: lichtwerk
Maniphest Tasks: T93999
Differential Revision: https://developer.blender.org/D1363
When copying a full node tree, we can avoid an O(n^2) loop finding a
unique name for every node if we assume they already have unique names.
That is a reasonable assumption, since unique names are verified
elsewhere when adding a new node.
Copying a node tree with about 4000 nodes took 42 ms before,
now it takes 6 ms.
Differential Revision: https://developer.blender.org/D13644
These pointers point to the new nodes when duplicating,
and their even used to point to "original" nodes for
"localized" trees. They're just a bad design decision
that make code confusing and buggy.
Instead, node copy functions now optionally add to a map
of old to new socket pointers. The case where the compositor
abused these pointers as "original" pointers are handled
by looking up the string node names.
Differential Revision: https://developer.blender.org/D13518
Previously, the values passed to a multi-input socket were stored
in the order that they arrived in. Then, when the values are accessed,
they are sorted depending on the link order.
Now, the ordering is determined in the beginning before execution starts.
Every value is assigned to the right index directly, avoiding the sort
in the end. This makes the ordering more explicit.
Caused by {rBb0d9e6797fb8}
For the header (both Graph Editor case in general `headerTranslation` as
well as `headerTimeTranslate`) we are interested in deltas values
(not absolute values).
Since culprit commit, `snapFrameTransform` was not working with deltas
anymore, but we have to compensate for this.
For the Graph Editor, this only worked "by accident" in rB7192e57d63a5,
since `ival` is still zero at this point.
So now, reacquire the delta right after the snap operation.
Also use a more appropriate center value in the translate operator.
Maniphest Tasks: T94191
Differential Revision: https://developer.blender.org/D13641
This commit makes freeing a node tree about 25 to 30 times faster.
Freeing a node tree happens whenever it is edited. Freeing a node
tree with about 4000 nodes went from 30-50ms to about 2 ms.
This was so slow before because for every node that was freed
when freeing the node tree, `node_free_node` looped over all
other nodes to detach frames, and then looped over all links to
remove any links connected to the node. That was all pointless
work because everything else is about to be freed anyway.
Instead, move that "detaching" behavior to the dedicated function
for removing a single node, and to the "local" version of the free
function to be safe, since I know less about what that version expects.
Differential Revision: https://developer.blender.org/D13636
On Windows, encode file paths as UTF-16 before trying to open the file
for reading/writing.
This introduces a new class `blender::fstream`, which wraps
`std::fstream` and provides this UTF-16 encoding. This class should also
be used in other areas, like the Alembic importer/exporter.
Manifest Task: T93960
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13633
Goals of this refactor:
* More unified approach to updating everything that needs to be updated
after a change in a node tree.
* The updates should happen in the correct order and quadratic or worse
algorithms should be avoided.
* Improve detection of changes to the output to avoid tagging the depsgraph
when it's not necessary.
* Move towards a more declarative style of defining nodes by having a
more centralized update procedure.
The refactor consists of two main parts:
* Node tree tagging and update refactor.
* Generally, when changes are done to a node tree, it is tagged dirty
until a global update function is called that updates everything in
the correct order.
* The tagging is more fine-grained compared to before, to allow for more
precise depsgraph update tagging.
* Depsgraph changes.
* The shading specific depsgraph node for node trees as been removed.
* Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only
tagged when the output of the node tree changed (e.g. the Group Output
or Material Output node).
* The copy-on-write relation from node trees to the data block they are
embedded in is now non-flushing. This avoids e.g. triggering a material
update after the shader node tree changed in unrelated ways. Instead
the material has a flushing relation to the new `NTREE_OUTPUT` node now.
* The depsgraph no longer reports data block changes through to cycles
through `Depsgraph.updates` when only the node tree changed in ways
that do not affect the output.
Avoiding unnecessary updates seems to work well for geometry nodes and cycles.
The situation is a bit worse when there are drivers on the node tree, but that
could potentially be improved separately in the future.
Avoiding updates in eevee and the compositor is more tricky, but also less urgent.
* Eevee updates are triggered by calling `DRW_notify_view_update` in
`ED_render_view3d_update` indirectly from `DEG_editors_update`.
* Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`.
This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`.
Removing updates always has the risk of breaking some dependency that no
one was aware of. It's not unlikely that this will happen here as well. Adding
back missing updates should be quite a bit easier than getting rid of
unnecessary updates though.
Differential Revision: https://developer.blender.org/D13246
Outliner would frame the armature object instead of the bone if the bone
was on a hidden armature layer.
Similar to issues reported in e.g. T58068 and T80464, this is due to the
fact that `BKE_pose_channel_active` always checks for the armature layer
(and returns NULL if a bone is not on a visible armature layer).
Now propose to make this layer check **optional** (and e.g. from the
Outliner be more permissive). This also introduces
`BKE_pose_channel_active_if_layer_visible` which just wraps
`BKE_pose_channel_active` with the check being ON.
Maniphest Tasks: T92930
Differential Revision: https://developer.blender.org/D13154
Initialise the BKE callback system in
`BlendfileLoadingBaseTest::SetUpTestCase()`. This allows certain tests
to run in debug mode (when `BLI_assert` is enabled).
This happens because in `SEQ_time_update_sequence` function
`SEQ_get_meta_by_seqbase` returns uninitialized value. This isn't nice,
but it shouldn't happen in first place. Problem is, that
`SEQ_edit_strip_split` does move strips into detached `ListBase`, so
other functions can't see them anymore. Detached `ListBase` is used
solely to preserve relationships during duplication.
Move strips to original `ListBase` immediately after duplication and
return `NULL` if `SEQ_get_meta_by_seqbase` can't find meta strip.
Splitting itself can still rely on fact, that number of original and
duplicated strips is same and they are placed next to each other in
exactly same order at the end of original `ListBase`.
In this commit I changed many loops to range-based for loops.
I also removed some of the redundant iterator variables, using
indexing inside the loop instead. Generally an optimizing compiler
should have no problem doing the smartest thing in that situation,
and this way makes it much easier to tell where data is coming from.
I only changed the loops I was confident about, so there is still more
that could be done in the future.
Differential Revision: https://developer.blender.org/D13637
This was visible outside of camera view and was not respecting the
"Depth of Field" checkbox on the Camera properties.
Now return early if DoF should not be visible.
Maniphest Tasks: T94262
Differential Revision: https://developer.blender.org/D13631
Sculpt.c is now three files:
* Sculpt.c: main API methods and the brush stroke operator
* Sculpt_brushes.c: Code for individual brushes.
* Sculpt_ops.c: Sculpt operators other than the brush stroke operator.
TODO: split brush stroke operator into a new file (sculpt_stroke.c?).
The duplicated edges were caused by 'oversubdivided' edges, i.e. edges
where some of the vertices on them are only connected to two polygons.
The fix finds these vertices and 'dissolves' them so that only one edge
is created.
For most 'normal' meshes this shouldn't occurr, or only very little, so
the performance impact of this change should be neglegible. In practice
this is also avoidable by triangulating the mesh first.
Differential Revision: https://developer.blender.org/D13445
This fix provides better conditions for asserts in `NURBSpline::knots`
method accounting for cyclic NURBS curves.
Differential Revision: https://developer.blender.org/D13620
On a Ryzen 3700x, this ended up 2.5x faster than before. More
benchmarking details are included in the differential revision.
For smaller grids, all this should do is increase the
code size a bit, and add a few more if statements.
Differential Revision: https://developer.blender.org/D13617
This was basically not implemented, do this via
`ED_autokeyframe_property` in a new dedicated function in
special_aftertrans_update.
Maniphest Tasks: T93570
Differential Revision: https://developer.blender.org/D13608
Differentiate doc-strings from title/section text.
Also use explicit doxygen references to struct members
so it's not ambiguous which member is being referenced.
Note that these changes aren't complete (some files weren't touched).
