ImBuf types were getting stored as bitflags in a 32bit integer which had
already run out of space. Solved the problem by separating file type to
an ftype enum, and file specific options to foptions.
Reviewed by Campbell, thanks a lot!
from Lawrence D'Oliveiro (ldo)
More use of bool type, necessitating adding inclusion of BLI_utildefines.h, or moving it up in the inclusion order if it was already included, in various places
- storage.c: make some variables only used in bli_builddir local to that
- storage.c: BLI_file_descriptor_size should allow 0 as a valid file descriptor
- path_util.c: make pointers to non-reentrant storage returned from folder routines const, necessitating making variables holding these returned pointers const elsewhere as well
- path_util.c: BLI_string_to_utf8 closes iconv context in case of conversion error
- blf_lang.c: fill_locales routine now has its own "languages" local variable to construct paths (was stealing internal storage belonging to BLI_get_folder before)
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
Not all file formats/calls are supported yet. It will be expended.
Please from now on use BLI_fopen, BLI_* for file manipulations.
For non-windows systems BLI_fopen just calls fopen.
For Windows, the utf-8 string is translated to utf-16 string in order to call UTF version of the function.
- omit render code from this warning (cmake only), until render branch is merged.
- moved -Wunused-parameter warning to apply to all C code in blender (not just ./source/blender), (cmake only).
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
Now it's a bit more robust, tagging images with profiles when they're loaded,
which then get interpreted later on by conversion functions. Just Linear RGB
and sRGB profiles at the moment, same as before.
This commit fixes Martin's problem with EXRs and Multilayer images loading/
saving too dark, and it also makes the sequence editor work correctly with it too.
Also fixes:
[#19647] gamma correction with color management is reset when resetting Curve
[#19454] 2.5: Dither does not work when Color management is enabled
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
source/creator/creator.c
changed ifdef's around fpe_handler to match when its actually used.
intern/SoundSystem/intern/SND_AudioDevice.cpp
Changed: SND_SoundObject* oldobject = oldobject = pIdObject->GetSoundObject();
to: SND_SoundObject* oldobject = pIdObject->GetSoundObject();
intern/SoundSystem/openal/SND_OpenALDevice.cpp
removed unused var.
source/blender/blenkernel/intern/mball.c
initalized a couple of vars that might have been used uninitalized.
The rest were changing types to match, most of them were something like
was short * should have been unsigned short *.
Kent
It moves targa, bmp, iris and png loading so that were not opening
2 file handles for each file, and made them like the jpeg stuff.
Also cleaned up some minor other stuff.
Kent
Summary: standardized imageformat functions(make function names similar, and
parameters in same order where relavant), small code cleanups, and
added a description of how to add an image format to blender.
Kent
Specifics:
merged png_decode.c and png_encode.c to png.c and cleaned function calls.
fixed some spacing in IMB_imbuf_types.h
casting cleanups:
intern/amiga.c
intern/ham.c
intern/iris.c
Modified switch statements to have a default type to insure values are set:
intern/antialias.c
Initalization of some vars and make types similar.
intern/bitplanes.c
cleaned function calls, and changed if else to if's with return:
intern/jpeg.c
added {}'s in multidemensional arrays.
intern/matrix.h
Made a little cleaner to read, and matched above changes.
intern/readimage.c
intern/writeimage.c
