- Depricated another bunch of globals; all the totobj,
totmesh, totvert, and so on.
- All code that needs such totals now count it themselves,
these stats were not supposed to be reliable
- Editmesh now stores and manages own totals.
- Todo: make a scene->stats that tracks notifiers.
Bugfix: selecting failed in editmesh, backbuffer stuff was
too late, already using index ranges before it was set.
Organized as follows:
uvedit/
uv editing related code
uvedit_draw.c: drawing code
uvedit_ops.c: operators, just a few done
uvedit_unwrap_ops.c: will be operators for unwrapping
uvedit_paramatrizer.c: lscm/abf/stretch/pack
space_image/
space_image.c: registration and common getter/setters
image_draw.c: drawing code, mostly functional
image_panels.c: panels, all commented out
image_render.c: render callbacks, non functional
image_ops.c: operators, only view navigation done
image_header.c: header, menus mostly done but missing buttons
Notes:
* Header menus consist only of Operator and RNA buttons, if they
are not implemented they're displayed grayed out. Ideally the full
header could work like this, but std_libbuttons looks problematic.
* Started using view2d code more than the old code, but for now it
still does own view2d management due to some very specific
requirements that the image window has. The drawing code however
is more clear hopefully, it only uses view2d, and there is no
switching between 'p' and 'f' view2d's anymore, it is always 'f'.
* In order to make uvedit operators more independent I move some
image space settings to scene toolsettings, and the current image
and its buffer is in the context. Especially sync selection and
select mode belonged there anyway as this cannot work correct with
different spaces having different settings anyway.
* Image paint is not back yet, did not want to put that together with
uvedit because there's really no code sharing.. perhaps vertex paint,
image paint and sculpt would be good to have in one module to share
brush code, partial redraw, etc better.
Editmesh: add primitive basics back. Had to clean up a load of
crap there... but it's sorta in control, so I think Shul can
pick it up again.
Test: ctrl+0 adds plane, or ctrl+9 adds grid.
Notes for Shul:
- i've added a transform function, which gets correctly passed
on to the add_prim function, should work for all object
transforms. Only the code inside add_prim might be needed
to check (it uses 4x4 mat now, not a 3x3)
- The old code with buttons has been ifdeffed out, check for
user input and make it rna properties, which get read
in the exec(), and handed over to the add_prim. Set them
default now to the values from old buttons.
- Operator naming is preferred lower case, I gave this
a new name.
- check a bit on formatting code, but don't use the old code
as example! Look also at ED_keymap_mesh() for example.
- restored three more C files: editlattice, editkey
and editgroup
- editmode lattice working, (mouse select works)
- accidentally removed yesterday 3d cursor drawing
- removed global editLatt entirely now.
Instead of many commits, here 1!
- Constraint edit code back
- Removed XXX stubs for constraints
(make parent follow path works)
- Removed XXX stubs for armature
(make parent deform, do center, etc works)
- Found a bad uninitialized global Scene * in code, especially
in kernel it wreaked havoc.
- added missing include in blenkernel/brush.c
- fixed Nicholas' fix for editmode subsurf crash
(It needed to check for editmode)
Removed another bad global "editbutvweight", a value from buttons
used to paint weights with, or to set weights. Is now part of
weightpaint struct in scene.
- Weightpaint back (CTRL+TAB or menu)
Also weightpaint is sortof non-modal, allowing to use all existing
hotkeys while in paint mode. Only leftmouse is overridden.
- Made vpaint and wpaint entirely local, stored in scene (and saved!)
- Small bugfix (also in 2.48): on weightpaint mode, all armature objects
in 3d window were drawing as active poses. Now only the armature
deformer is.
Nice point for the UI agenda: are paint modes on ACTION mouse? Only then
you can combine it with SELECT mouse...
Two more files, vpaint.c and editdeform.c
No functionality working related to this yet, tomorrow!
(Added editdeform.c in mesh after all, it's doing hardly no lattice
stuff, and it seems out of place in anim_api)
soc-2008-nicholasbishop branch.
Note: any old code with multires_test() or multires_level1_test() can
just be deleted, not needed by the multires modifier.
Put back Armature/Pose code, including 'heat weight'.
I've added reeb.h to get things compile, but Martin will
cleanup files and put back?
Now where to put all vertexgroup code.... I guess mesh?
Note for msvc: yep, another new dir to add! :)
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
Transform operator replay
Basic support working. Only saves mode and values, not constraint setup.
Removed event pointer from TransInfo (it's not available in operator exec). Replaced checks to event->modifiers to a functional modifier bitfield in TransInfo (that is, instead of checking for Shift, it checks for MOD_PRECISION) to make it remappable later.
Misc:
X-Mirror for mesh now working with transform
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
- View3D backbuffer select is back ("occlusion select").
It doesn't use the old 'afterqueue' yet, which ensured backbuffers
to draw immediate after swapbuffers. Will with that.
- Put back vertex/edge/face select
- Mode menu allows going in/out editmode
- Tested some tweak event stuff in WM, made tweak event follow
user preset for 'action' or 'select' mouse.
(Wanted to try this for transform, but better get advise from
Martin first :)
- Edit mode Mesh undo/redo back
(undo for editmodes needed recode, todo for curve/lattice/etc)
- Added border select for edit mesh
- Added Akey (de)select all for edit mesh
- Added notifiers for mode changes.
This is also the first trial to dynamically add/remove
keymap handlers, based on modes. For that reason the Object
keymap was split in 2, modal and non-modal. On TABkey, the
view3d listener removes and adds maps.
The view3d keymap still handles generic mouse/border selection.
Internally it will verify modes.
The modes are not re-implemented still... have to move this
to scene context.
- Transform for editmesh (including PET and editmesh snap) X-Mirror doesn't seem to work, but the option isn't accessible in the UI, so...
- Replacing G.obedit with obedit from context in view3d_header (other files will have to be done too, I just happened to stumble on that one while fixing other things).
Added extend-select for edit mesh.
Note for operator design; you cannot give operators hardcoded
properties like "SHIFT" or "ALT", that conflicts with the idea
of keymaps. Instead the properties have to be functional, like
setting 'extend' on or off.
I also think mouse select could get these operators:
- activate/select, option 'extend'
- activate/select on object center, option 'extend'
- activate/select, with menu, option 'extend'
and of course loop-select, group-select, and so on.
BTW: border-select could also get 'extend' option :)
So, editmode mesh is back! :)
At the moment only TABkey works and mouse select, 1 vertex at a
time. More will follow of course.
Note for the devs:
- G.editMesh has been removed, be careful with old code.
- EditMesh now is property of Mesh itself
Although it means unlimited editmodes, for migration purposes we
better stick to 1 "obedit" per scene, which is in Context too
- G.obedit will get removed soon, so use CTX_data_edit_object(C)
Or if you can't, just scene->obedit for now
- Also removed the CTX_data_edit_mesh(), this has no meaning
anymore. EditMesh is not context senstitive anymore, only the
edit-object for time being is.
- Martin: I've already tucked some EditMesh pointer in T and
removed all G.editMesh there.
Undo editmode and global undo code back.
It's now called ED_undo_push() btw, but don't worry, for operators
this is going to be a simple operator flag, so you can remove the
old calls from all tools (but keep them when you directly change
data outide modifiers).
Will put undo back functional tomorrow
EditMesh: further cleanup, made derivedmesh itterator functions
work by gathering all related data in local ViewContext struct.
(scene, editmesh, region, view3d, obedit).
Also removed bad inclusion of view3d_intern.h in mesh module.
Editmesh code cleaned and compiling/linking. A whopping
20k lines back! :)
Not that it does stuff... editmode in/out has to be done,
and loads of operators. Also linking/exporting editmesh
calls has to be reviewed.
Also: added a blender_test_break() mechanism in BKE.
- first work on getting area/screen handling back
- added structure for where to put stuff, is still under
review, wait a bit for docs?
Campbell is working on removing every bad level include from
sources, so we can safely rebuild the src/ directory.
