The calls to `BKE_animsys_evaluate_all_animation()` and
`BKE_mask_evaluate_all_masks()` used the wrong timecode to evaluate the
animation system. This happened:
- Sequencer in scene A was rendered at frame X.
- Scene strip for scene B which should be evaluated at frame Y.
- BKE_animsys_evaluate_all_animation() was called with frame Y, which
also re-evaluated the animation data in scene A.
- Other sequencer strips with animated values were then evaluated for
frame Y and not frame X.
Since the depsgraph for rendering the scene strip is already OK and does
its job, it's no longer necessary to re-evaluate all the animation in
this way.
Removed `BKE_mask_evaluate_all_masks()` because it's no longer used.
Reviewers: sergey, brecht, iss
Differential Revision: https://developer.blender.org/D5394
Masks were not really covered by Copy-on-Write due to mistake
in the dependency graph. After correcting that mistake a lot
of tools became broken, so majority of the patch is related
on making it so access to evaluated/tessellated masks is done.
When accessing evaluated mask state make sure access to an
evaluated dependency graph is done. This solves possible
access to NULL data on redo.
Fixes T64899: Re-doing new point addition causes crash
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T64899
Differential Revision: https://developer.blender.org/D4918
Convention was not to but after discussion on 918941483f we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
Currently this is a no-visible-changes change, but the idea is to use this
dedicated flag to tell which exact components of ID changed, make it more
granular than just OBJECT and OBJECT_DATA. Allow setting this field based
on what components new dependency graph flushed on evaluation.
This is a part of ongoing work in Blender 2.8, where we need to replace
`object->id.tag & LIB_TAG_ID_RECALC_DATA`
with
`object->data->id.tag & LIB_TAG_ID_RECALC`
Should be no user measurable difference.
The legacy algorithm only considers two adjacent points when computing
the bezier handles, which cannot produce satisfactory results. Animators
are often forced to manually adjust all curves.
The new approach instead solves a system of equations to trace a cubic spline
with continuous second derivative through the whole segment of auto points,
delimited at ends by keyframes with handles set by other requirements.
This algorithm also adjusts Vector handles that face ordinary bezier keyframes
to achieve zero acceleration at the Vector keyframe, instead of simply pointing
it at the adjacent point.
Original idea and implementation by Benoit Bolsee <benoit.bolsee@online.be>;
code mostly rewritten to improve code clarity and extensibility.
Reviewers: aligorith
Differential Revision: https://developer.blender.org/D2884
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
Things like `BLI_uniquename` had nothing, but really nothing to do in
BLI_path_util files!
Also, got rid of length limitation in `BLI_uniquename_cb`, we can use
alloca here to avoid overhead of malloc while keeping free size (within
reasonable limits of course).
Adding make_local for vfont/gpencil/group/freestyle linestyle/mask/scene/sound/text.
Note that there are still some lose ends here, since some type are not handled by id_copy
(Scene, Sound and VFont), which means in case a datablock of that type is used both
directly and indirectly, localization will fail.
Scene copying might be doable though (maybe with a simple new 'full shalow' mode to existing BKE_scene_copy?),
not sure about sounds and vfonts... Situations where this becomes an issue should be very rare corner cases anyway.
Idea looked good, but we have too much custom situations here (some half-fake-sub-ID
being copied with their 'owner', animdata, etc.), let's let datablock copy functions
handle that themselves.
Also allows to safely call BKE_id_expand_local from all copy functions now (only when
copying linked data).
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
