curves.
Issue here is that brush curve could return negative values. This would
result in overflow of mask values. Those were not visible during real
time preview because result would be clamped.
We had two functions in the code, one of which allowed negatives but I
don't think that we really want that, users have no control over the
negative values at all anyway.
Thanks to the reporter, Leon Cheung for figuring out the issue :)
Yep, at last it's here!
There are a few minor issues remaining but development can go on in
master after discussion at blender institute.
For full list of features see:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Painting
Thanks to Sergey and Campbell for the extensive review and to the
countless artists that have given their input and reported issues during
development.
attenuation that should really be optional. There's also a minor
performance penalty and all this only for one problematic case. In case
the tool flattens two surfaces, users can manually set the front face
only option. A better non-attenuating way to cull such vertices can be
added later.
Also flatten brush should calculate the flatten plane from the original
vertices or the flattening will not converge for planes offsets
different than zero.
Reported by Michalis Zissiou, thanks!
* Cleanup for previous commit and reduce some local variable referencing
* Add support for brushes that operate on frontfaces only and do not
show the option for those brushes. Currently only clay strips is in the
list but this may change according to artist feedback. This should take
care of the "sticky" surface problem completely.
rotation of the brush mask texture.
Unfortunately secondary path does not work here because we do not have a
permanent switch to choose between primary-secondary brush texture. Use
operator property instead.
consistent with projection painting.
Also did some refactoring of this code, moving the brush image creation code
out of brush.c and making it consistent with image updating code.
* 2D image painting with textures that contained alpha did not work correctly,
had been broken for a while.
* 2D image panels texture (mask) panels showed wrong buttons for texture overlay.
* Texture map mode 3D now also uses masking, like Tiled and Stencil the texture
does not move along with the brush so it works fine.
* 2D image paint View mapping did not work correct, especially noticeable with
Rake rotation.
* Masking is now disabled for the smear tool, this can't really work because
the original image is constantly changing and gave artifacts.
* 2D image painting support for masking to limit the max contribution of a stroke
to a pixel, to get it working compatible with projection painting. Not strictly
a bugfix, but the inconsistency here was annoying.
* Fix python errors in Texture Mask panel in image editor, was missing overlay
options.
* Clamp paint mask to 0..1 in case some texture exceeds it, this could give black
pixels due to integer overflow.
Issue is sharing using global random generator which is shared with
particle system which resets the seed due to some scene/option
combination. Since it may be desirable to get predictable results with
particles, made sure brushes allocate their own random number generator
on startup and use that for jittering.
paint. Was own regression when optimizing colour operations. I will not
use an alpha bit mask since it may run into portability issues with byte
order.
ALERT! POSSIBLE BREAKING COMMIT, ESPECIALLY FOR SCULPT!
Separate the sculpt sampling function so that it can be reused
from other paint systems. This includes updating of the relevant
coordinates for anchored and rake style brushes, which are now
being updated as part of the stroke system.
I left only code for area-style brush texture mapping in sculpt
code, since it requires a few data structures not present on other
paint systems.
This commit makes it almost as easy to support rake on other systems as
exposing the python UI for it. Also it makes it totally possible to
have texture painting capabilities in vertex paint too :) These commits
will follow very soon.
Also, even if I did my best to keep the code from breaking, (even fixed a
leftover bug from coordinate changes) this is a big change. Please test!
This is as close as I can get to keeping the old code intact. After this
commit, I will have to change existing code paths, making testing of
functionality harder.
Changes:
* Keep only projective texturing code in paint_image_proj.c
* Move 2D code to paint_image_2d.c. This needed the introduction of
allocation/cleanup functions for the relevant structures.
* Common code interface for both modes stays in paint_image.c (which
still includes all old code, system should work as it did with the
exception of non-projective 3D paint mode) and is made public. This is
not a lot of code, only rectangle invalidation and undo system.
* Changed the naming in the new code slightly: imapaint_ prefixed functions refer to
common functions used by both systems, paint_2d_ prefixed to 2d
painting. There will be an interface for the projection painting as
well. Probably there is some leftover naming conversions to do.
TODO:
* Move operator init/exec/modal to common interface file
* Get rid of old BKE_brush_painter_paint, now brush_painter_2d_paint.
All code uses stroke system for the stroke management
* Write space pressure management for the paint stroke system (for other
systems to access as well :) )
* Move texture paint tablet presssure exception code for old bugs to
stroke system (makes me wonder...aren't other systems also influenced by
these pressure issues?) or up in the function hierarchy inside texture
paint. This code is still not there so users with tablets may notice
some issues.
* possibly change other systems to pre-multiply pressure with the
relevant influenced attributes in the stroke function. This could get
tricky though and it's possible that it could backfire.
Issue was caused by couple of circumstances:
- Normal Map node requires tesselated faces to compute tangent space
- All temporary meshes needed for Cycles export were adding to G.main
- Undo pushes would temporary set meshes tessfaces to NULL
- Moving node will cause undo push and tree re-evaluate fr preview
All this leads to threading conflict between preview render and undo
system.
Solved it in way that all temporary meshes are adding to that exact
Main which was passed to Cycles via BlendData. This required couple
of mechanic changes like adding extra parameter to *_add() functions
and adding some *_ex() functions to make it possible RNA adds objects
to Main passed to new() RNA function.
This was tricky to pass Main to RNA function and IMO that's not so
nice to pass main to function, so ended up with such decision:
- Object.to_mesh() will add temp mesh to G.main
- Added Main.meshes.new_from_object() which does the same as to_mesh,
but adds temporary mesh to specified Main.
So now all temporary meshes needed for preview render would be added
to preview_main which does not conflict with undo pushes.
Viewport render shall not be an issue because object sync happens from
main thread in this case.
It could be some issues with final render, but that's not so much
likely to happen, so shall be fine.
Thanks to Brecht for review!
It was caused by own mistake by not noticing externtex is used not
only by render engine. Now this function uses pool passed as argument
rather than using R.pool.
to draw with procedural textures on surface of object. 2D painting will
still paint as if tiled.
When we unify the paint systems, the texture sampling functions will
need to be changed. Sculpt uses a slightly different system that passes
both screen and 3d coordinates to the sampling function. This commit
however is not too disrupting for that however so it can go in now.
Separate 2D painting functions away from brush.c, which should implement
the brush API and into its own file, paint_2D.c.
Ideally projective texturing and 2D painting should be totally separate,
however functionality is still interleaved mostly in the
BKE_brush_painter_paint function. The functionality of this function can
possibly be done using the brush stroke functions instead.
Patch from Jaggz H, thanks!
[#31096] Weight-painting: Brush-specific weights
http://projects.blender.org/tracker/?func=detail&atid=127&aid=31096&group_id=9
Each brush's weight can now be set individually, can also enable
unified setting (same as size and strength have.)
Added readfile code to the patch: subversion bumped to 1, brushes get
default weight of 0.5, unified weight enabled by default and value
from old vgroup_weight field.
added some missing functions too - which are not used yep but should be there for api completeness.
* CDDM_set_mloop
* CDDM_set_mpoly
* BLI_mempool_count
Things like brush size and strength accessors now take a scene
parameter rather than guessing about which Scene's unified paint
settings to use.
Setting the size/strength through RNA can now be done separately for
the brush or the UnifiedPaintSettings.
The UI python code required updating to check whether the
size/strength controls should use brush or UnifiedPaintSettings RNA.
Radial control also required some updates to switch between the two
RNA sources.
Added RNA for the unified paint setting flags that matches the Brush
RNA. Fixed the getter/setter functions to avoid guessing which Scene's
UnifiedPaintSetting to use. The getter functions take a Scene pointer
now, the setter functions are removed in favor of a more explicit
approach through RNA:
Rather than RNA choosing whether a property's value is in the Brush or
in the UnifiedPaintSettings, there are now explicit properties for
both. The UI code has been modified accordingly to switch the toggle
buttons between affecting the Brush and the UnifiedPaintSettings.
This fix also allows for partial update of the image, speeding up painting.
The different code path implemented will be used to upload high resolution images to OpenGL when onion branch is merged.
Due to conversion of float textures to/from sRGB, corrections made to brush color sampling to take account of the image profile. This is not 100% correct yet as texture images used for projection painting strokes are not converted to/from sRGB yet(This has been decided due to loss of precision for 8-bit formats). It will have to do for now, though.
last-minute update, exr image loading is broken, will fix asap
Patch to make the radial control more generic with RNA. Patch was
reviewed here: http://codereview.appspot.com/4280080/
Prior to this update, the radial control code in trunk had generic
parts of the radial control implemented as an incomplete operator
within WM. Then each different user of the radial control had to
implement a separate operator to actually pass in specific brush data
-- e.g. sculpt's brush size, vpaint's brush size, etc.
This patch removes all the extra operators and makes the WM operator
do everything. It now takes several RNA path strings as its properties
-- the only required property is data_path, which specifies the data
to be modified by the radial control. The other paths affect display
in various ways, e.g. rotation, color, etc.
In addition to decreasing some duplicate paint brush code, these
updates make it pretty easy to enable radial control for other
purposes (and it can be set up entirely though python or keymaps, no
extra C code needed.)
- rename rna collection structs Main prefix to BlendData: eg, MainObjects --> BlendDataObjects
- printing python collection now prints its type (when available)
- renamed shadowed vars in bpy_rna.c.
- when making functions static I also made debugging/test functions static, reverse and add definitions to headers instead.
More cleanups: moved a function declaration to the correct module,
removed old/incorrect comments, marked more things with TODO where
appropriate, refactored copy-pasted function, de-duplicated code.
- remove brush array for each Paint struct, just use a single brush pointer.
- removed rna function based template filtering.
- filter brushes using a flag on the brush and the pointer poll function.
- set the brushes using a new operator WM_OT_context_set_id().
TODO
- remake startup.blend, currently brush groupings are lost.
- rewrite WM_OT_context_set_id() to use rna introspection.
Added a brush reset operator so that a user won't need to reload the default blend to get back default brush settings
* New brush.reset operator, resets a brush based on the currently-selected tool
* Added UI button in the tools panel
TODO:
* Only resets sculpt brushes right now, other paint modes should be added
* Sculpt polish tool exists only as a Brush, not as a tool; I'd suggest we make it a tool so it can be reset to defaults too
* Fix: unify strength and size did work consistently with other paint modes
* Fix: If [ and ] keys were used to resize a brush it was not possible to increase the size of the brush if it went under 10 pixels
* Fix: Made interpretation of brush size consistent across all modes, Texture/Image paint interpreted brush size as the diameter while all the other modes interpret it as radius
* Fix: The default spacing for vertex paint brushes was 3%, should be 10%
* Fix: due to fixes to unified strength, re-enabled 'Unify Size' by default
* Fix: Unified size and strength were stored in UserPrefs, moved this to ToolSettings
* Fix: The setting of pressure sensitivity was not unified when strength or size were unified. Now the appropriate pressure sensitivity setting is also unified across all brushes when corresponding unification option is selected
* Fix: When using [ and ] to resize the brush it didn't immediately redraw
* Fix: fkey resizing/"re-strength-ing" was not working consistently accross all paint modes due to only sculpt mode having full support for unified size and strength, now it works properly.
* Fix: other paint modes did expose the ability to have a custom brush colors, so I added the small bit of code to allow it. Note: I made all of the other paint mode brushes white. Note2: Actually, probably want to make the paint modes use the selected color for painting instead of a constant brush color.
* I had removed OPTYPE_REGISTER from some Sculpt/Paint operators but in this commit I add them back. I'm not completely sure what this option does so I don't want to disturb it for now.
