This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
Better use higher-level code from common ID management when possible.
Helps to de-duplicate logic, and reduces outside usages of more
'dangerous' functions.
Note that we could get rid of many of those `BKE_<id_type>_add`
functions now, but on the other hand several of those take extra
parameters and perform additional actions, so think we can keep them all
for now as 'non-standard ID specific creation functions'.
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
This patch adds the ability to render motion blur from Alembic caches.
The motion blur data is derived from a velocity attribute whose name has
to be defined by the user through the MeshSequenceCache modifier, with a
default value of ".velocities", which is the standard name in Alembic
for the velocity property, although other software may ignore it and
write velocity with their own naming convention (e.g. "v" in Houdini).
Furthermore, a property was added to define how the velocity vectors
are interpreted with regard to time : frame or second. "Frame"
means that the velocity is already scaled by the time step and we do not
need to modify it for it to look proper. "Second" means that the unit
the velocity was measured in is in seconds and so has to be scaled by
some time step computed here as being the time between two frames (1 /
FPS, which would be typical for a simulation). This appears to be
common, and is the default behavior.
Another property was added to control the scale of the velocity to
further modify the look of the motion blur.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D2388
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
This has been long standing TODO...
Note that remaining usages of BKE_xxx_delete should all be carefully
checked for and utilmately nuked in favor of `BKE_id_delete()`, think we
still have quiet a few bugs hidden in those (code seems to usually
assume those functions do a full ID deletion, which is not the case).
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
* The cache file datablock is now evaluated as part of the dependency graph,
creating/freeing the Alembic file handle matching the current frame.
Modifiers and constraints depend on this evaluation.
* Cache file handles and readers now only exist on COW datablocks, never the
original ones.
* Object data paths are flushed back to the original for the user interface.
* The cache file keeps a list of all readers associated with its handle, and
automatically frees them when the handle is freed. This kind of sharing of
data across datablocks is weak but we have no better mechanism for it.
Fix T62720: Alembic sequences not working and crashing
Differential Revision: https://developer.blender.org/D4774
The `BLI_path_frame_strip` function was completely broken, unless the
number of digits in the sequence number was the same as the length of
the extension. In other words, it would work fine for `file.0001.abc` (4
digit `0001` and 4 char `.abc`), but other combinations would truncate
to the shortest (`file.001.abc` would become `file.###.ab` and
`file.00001.a` would become `file.##.a`). The dependency between the
sequence number and the file extension is now removed.
The behaviour has changed a little bit in the case where there are no
numbers in the filename. Previously, `path="filename.abc"` would result
in `path="filename.abc"` and `ext=""`, but now it results in
`path="filename"` and `ext=".abc"`. This way `ext` always contains the
extension, and the behaviour is consistent regardless of whether there
were any numbers found.
Furthermore, I've removed the `bool set_frame_char` parameter, because
it was unclear, probably also buggy, and most importantly, never used.
I've also added a unit test for the `BLI_path_frame_strip` function.
Convention was not to but after discussion on 918941483f we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This removes a bunch of animation/driver evaluations and recalc flags that
should be redundant in the new depsgraph, and were incorrectly affecting
the evaluated scene in a permanent way.
Still two cases that could be removed if the depsgraph is improved, in
BKE_object_handle_data_update and BKE_cachefile_update_frame.
For physics subframe interpolation there are also still calls to
BKE_object_where_is_calc that should ideally be removed as well, though
they are not known to cause keyframing bugs.
Differential Revision: https://developer.blender.org/D4274
When a CacheFile datablock is copied to an in-main datablock, it means that
the new copy should be independent of the old copy. In this case certain
properties are reset/duplicated. When it is copied to a no-main datablock,
we assume this is a copy-on-write copy that's used for evaluating things,
in which case the handle and object paths are referenced instead of
reset/ duplicated. This prevents us from re-opening the Alembic file every
time a new CoW copy is made.
The same approach is taken when freeing data (only when an in-main datablock
is freed do we actually free the data).
The mutex was shared between CoW copies of the CacheFile datablock, and
as a result also freed multiple times. It is now only freed when the
original datablock is freed; the CoW copies share the same mutex.
This way we allow animation system to make decisions based on which
context dependency graph is coming from, and whether it belongs to
an active edit window or not.
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
