Partially reverts 2250b5cefe.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefe. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
EasingType was implemented rBdaccaa713b6e for the GraphEditor (but never
made it to the Dopesheet). If you can select Easing Mode in the
DopeSheet, then you should also be able to select the associated Easing
Type.
Thanks @lichtwerk for the initial implementation.
Maniphest Tasks: T65076
Differential Revision: https://developer.blender.org/D6094
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
Each space had separate operators, duplicating logic.
Use RNA properties instead so adding the ability to toggle other
region types (floating redo region for eg) doesn't need to have an
extra operator per space type.
It's also nicer to show a check-box for something which can be toggled.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
* Proportional pie menu at shift+O.
* Snap pie menu at shift+S.
* Pivot pie menu at comma. Previous comma, ctrl+comma, period
and ctrl+period shortcuts for specific pivot types were removed.
Ref T56881.
Add tool options to control how select operates (add/sub/set/and/xor).
Note: edit mode armature select still needs to support all options,
this is complicated by how it handles partial end-point selection.
D3458 by @billreynish w/ edits.
- Context menu for dope-sheet, graph, image & node editors.
- Add type to contenxt menu header.
- Access with W-Key.
- Change UV-editor weld key binding to Shift-W.
When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed
from:
- GHOST (was mostly done, finished the job)
- window manager
- various editors
- RNA
- keymaps
The input tab of user prefs does not show 3D mouse settings. Key map
editor does not show NDOF mappings.
DNA does not change.
On my Mac the compiled binary is 42KB smaller after this change. It
runs fine WITH_INPUT_NDOF on or off.
This only works in the Action and Dopesheet modes (which operate on FCurve keyframes).
Support for Grease Pencil and Mask Keyframes though is still pending.
This commit adds some of the initial support for a properties region in the
Action Editor. There are currently no panels to display, as there is still
a lot of work required to port over the required internal architecture to
support the panels seen in the Graph Editor.
There are a few things here which are not so nice:
* Position of proportional edit circle is not centered on data
(difficult to predict positions here since those are completely custom,
will probably be positioned at center of area later instead)
* Result is flushed to curve handles only at the end of the transform,
so if people have the graph editor open they will see handles lagging behind.
After looking into this more carefully, I've found that we do in fact need a dedicate
operator to add some custom logic when trying to unlink an action from the editor/datablocks.
Specifically, this new operator does the following:
1) When in Tweak Mode, it shouldn't be possible to unlink the active action,
or else, everything turns to custard.
2) If the Action doesn't have any other users, the user should at least get
a warning that it is going to get lost.
3) We need a convenient way to exit Tweak Mode from the Action Editor
4) If none of the above apply, we can just unlink normally
This commit implements this for the Action Editor, with stubs for the NLA Editor too.
Those will be fixed next.
With this feature, it is now possible to quickly switch between different actions
stacked/stashed on top of each other in the NLA Stack without having to go to the
NLA Editor and doing a tab-select-tab dance, thus saving quite a few clicks. It
was specifically designed with Game Animation / Action Library workflows in mind,
but also helps layered animation workflows.
Usage:
Simply click on the up/down arrow buttons (between the action datablock selector
and the pushdown/stash buttons) to go to the action in the NLA Track above/below
the NLA Strip being whose action is being tweaked in the Action Editor.
Notes:
- These still work when you're not editing the action used by a NLA Strip.
If you're just animating a new action normally, it is possible to use the "down arrow"
to temporarily jump down to the previous action without losing the new action you're
working on, and then use the "up arrow" to get back to it once you're done checking
the other action(s).
- If there are multiple actions/strips on the same layer/track, then only the one
closest to the current frame will be used.
In constrast to the old "new" operator, this operator will stash the existing action
in the stack to prevent it from being lost. This situation isn't totally ideal yet,
since the NLA Editor still calls the old method.
This operator (the snowflake icon, beside the pushdown button on the Action Editor
header) adds the currently active action to the NLA stack in a muted track, then
creates + loads a new action ready to be populated with new keyframes.
Since the NLA is being used to hang on to all the actions here, no actions are
getting lost.
Usage Notes (there will be some additional tweaks to make this nicer):
* To preview different actions that have been "stashed", simply click the "Solo"
toggle for the track containing the action in question. Playing back the NLA will
now show the stashed track
* To edit a previously stashed action - simply enter tweakmode on it in the NLA
while the "Solo" toggle is enabled.
Todo:
* Add some more operators here to polish up the Action <-> NLA bridge to make the
layered and stash workflows smoother. Examples include some tools to easily
switch between the different actions layers in the stack, as well as making it
easier to get out of tweakmode (and sync up the action lengths)
* Review and cleanup the behaviour of the "new" operator here to avoid the old
problems that users were running into
* After the next release - Implement the full Action Libraries functionality, with
ways to bridge the stashed strips over to a full-blown library.
This commit exposes the "Push Down" button/functionality found in the NLA Editor
to the Action Editor, so that actions can be added NLA Stack from here too. The
main point of this for now is to make the whole layered-animation workflow nicer
more efficient, but not requiring the second editor be visible in common cases.
It also conveniently sets things up for the next few changes (already hinted at
here)...
and graph editor.
This was a tricky commit that was not so straightforward to make work.
The information for bones is not easy to come by in the animation curves,
however we do have some string manipulation tricks to make it happen.
Testing in gooseberry worked for the rigs there, commiting to master now
