As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
This includes:
- new modifier names
It mostly uses `N_` because the strings are actually translated elsewhere.
The goal is simply to export them to .po files.
Most of the new translations were reported in T43295#1105335.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15418
This changes is needed to give more control to modifiers' writing
callback when defined. It will allow to implement better culling of
needless data when writing e.g. modifiers from library overrides.
Ref. T97967.
Reviewed By: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D14939
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This is similar to e032ca2e25 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
Because this controls how the amount is used in should be set first and
is more important therefor place it at the top.
This is also consistent with other areas in Blender
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
